UASB反应器处理PTA废水的启动及污泥特性分析

采用上流式厌氧污泥床（UASB）反应器,以精对苯二甲酸（PTA）废水为处理对象,研究了中温条件下反应器的启动、颗粒污泥的形态和产甲烷活性及微生物群落结构。实验结果表明：采用逐渐提高进水负荷和减少水力停留时间的运行方法,历时近200 d,可实现UASB 反应器的启动。此时,反应器对COD的去除率保持在80%以上,对应的容积负荷也达到4.0 kg·（m3·d）-1以上。反应器内污泥实现颗粒化,颗粒污泥的体积平均粒径为416.53 μm,产甲烷活性为121.2 mL·（g·d）-1 （以VSS计）。颗粒污泥表面存在大量菌胶团,杆菌和丝状菌镶嵌其中。菌胶团有助于微生物的聚集,加速污泥颗粒化过程。Syntrophorhabdus是降解PTA废水中苯类污染物的重要微生物,占细菌量的27.4%,而Methanosaeta则是主要的产甲烷菌,占古细菌总量的67.3%。该研究可为UASB 处理PTA废水的启动提供依据。     

汶川地震后砌体结构房屋震害调查分析

2008年5月12日汶川8.0级地震后,根据四川省什邡市5幢砌体结构房屋震害的现场检测记录,以案例形式比较了房屋不同的结构形式、墙体布局、层间刚度比、构造柱设置、悬挑阳台、变形缝和选址等概念设计因素对结构抗震性能的影响,分析了结构发生各种损坏的原因,并对砌体结构房屋抗震设计提出建议。     

液/固相单一离子吸附体系的动力学预测模型

对四种液/固相单一离子吸附体系的动力学研究结果表明:吸附速率不仅随时间变化,也与起始离子浓度(C0)和吸附剂浓度(W0)有关;Lagergren准二级方程在给定的起始离子浓度及吸附剂浓度下具有很高的模拟精确度,但其参数随起始离子浓度和吸附剂浓度的变化而变化,且无法确定其间的函数关系;结合四组分离子吸附模型,提出了新的动力学方程,实验结果表明,新方程具有较高的模拟精确度,其参数与C0和W0具有相对稳定的函数关系,可作为液/同相单一离子吸附体系中给定C0,W0条件下吸附动力学过程的预测模型.     

美国EPA地表水质监测与评估的点位设计介绍

介绍了美国EPA地表水质监测与评估的点位设计。首先,指导性文件《基本水质监测方案》中的环境监测计划要求建立1个不少于1 000个点位的国家地表水质环境监测网,并提出了点位设计的标准,包括4点基本要求和针对每一类水域的具体要求。其次,另一指导性文件《准备州综合水质评估(305b报告)和电子升级:报告内容的准则》提出了1种新的对水质的综合性评估技术,要求在传统的判断点位设计的基础上增加概率统计点位设计方法。最后,全国一致的概率统计点位设计是相当有效的获知全国范围的水质情况及变化趋势的方法,EPA完全支持通过这种概率统计点位设计的方法来评估更多的水质状况。概率统计点位设计是EPA地表水质监测与评估的点位设计的发展趋势。     

An unconventional approach to studying the reaction kinetics of the Fenton's oxidation of 2,4-dichlorophenoxyacetic acid

The Fenton's oxidation kinetics of herbicide 2,4-D at various [Fe(II)] and [H(2)O(2)] combinations was investigated and modelled through an unconventional approach. The reaction kinetics of 2,4-D degradation demonstrated a two-stage pattern of decay, where a very fast reactive stage was followed by a retardation stage due to the depletion of oxidants and to the competitive side-reactions of the intermediates (including 2,4-dichlorophenol, chlorohydroquinone and 2,6-dichlororesorcinol). A model characterized by two newly established constants, the initial decay rate and the maximum oxidative capacity, was proposed and proven capable of describing the two-stage process, which cannot easily be described by conventional first- or second-order kinetics approaches.     

医疗废物中有机质的热解动力学研究

在空气气氛下，对医疗废物中几种有代表性的有机质进行非等温热解实验。分析实验结果发现，热解失重曲线与N2气氛下不同，出现多个DTG峰。利用Freeman—CarroⅡ法求出了各有机质的表观动力学参数，并建立了能较好反映各物料失重过程的表观多步反应动力学模型。针对混合物料无法直接求出表观动力学参数，建立了多组分反应动力学模型。     

油气管道第三方施工损伤风险控制方法研究

针对当前油气管道运行的现状指出第三方施工损伤风险控制的紧迫性,根据第三方施工损伤风险辨识的内容,以及油气管道第三方施工损伤风险评估中人为因素分析理论,阐述第三方施工损伤风险的影响因素,通过计算各因素的灰色关联度辨识出了第三方损伤风险的主控因素,并提出了第三方施工损伤风险控制方法.     

Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material

3D printing has received lots of attention due to its limitless potential and advantages in comparison to traditional manufacturing processes. This study focuses on the most popular type of home 3D printers, namely fused filament fabrication (FFF) printers, which use plastic filaments as the feedstock. The rather high material cost and large amount of plastic waste generated by FFF 3D printers have driven the need for plastic filaments produced from recycled plastic waste. This study evaluates, in terms of physical characterization, the feasibility of using recycled high-density polyethylene (HDPE), one of the most commonly used plastics, as the feedstock for 3D printers, in comparison with the common acrylonitrile butadiene styrene plastic pellets. In-house extrusion using recycled HDPE pellets and flakes is possible. The diameter consistency and extrusion rate results, along with other physical characterization results, including differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and water absorption, suggest that making filaments from recycled HDPE pellets is a viable option, as the obtained filament has favorable water rejection and comparable extrusion rate and thermal stability. Existing methods for overcoming the warping and adhesion problems in 3D printing with HDPE were also reviewed. In order to increase the market competitiveness of waste-derived filaments, optimization of the extrusion process, studies on the mechanical and aging properties, and development of a standard characterization methodology and database are crucial.     

Rapid assessment of postfire plant invasions in coniferous forests of the western United States.

Fire is a natural part of most forest ecosystems in the western United States, but its effects on nonnative plant invasion have only recently been studied. Also, forest managers are engaging in fuel reduction projects to lessen fire severity, often without considering potential negative ecological consequences such as nonnative plant species introductions. Increased availability of light, nutrients, and bare ground have all been associated with high-severity fires and fuel treatments and are known to aid in the establishment of nonnative plant species. We use vegetation and environmental data collected after wildfires at seven sites in coniferous forests in the western United States to study responses of nonnative plants to wildfire. We compared burned vs. unburned plots and plots treated with mechanical thinning and/or prescribed burning vs. untreated plots for nonnative plant species richness and cover and used correlation analyses to infer the effect of abiotic site conditions on invasibility. Wildfire was responsible for significant increases in nonnative species richness and cover, and a significant decrease in native cover. Mechanical thinning and prescribed fire fuel treatments were associated with significant changes in plant species composition at some sites. Treatment effects across sites were minimal and inconclusive due to significant site and site x treatment interaction effects caused by variation between sites including differences in treatment and fire severities and initial conditions (e.g., nonnative species sources). We used canonical correspondence analysis (CCA) to determine what combinations of environmental variables best explained patterns of nonnative plant species richness and cover. Variables related to fire severity, soil nutrients, and elevation explained most of the variation in species composition. Nonnative species were generally associated with sites with higher fire severity, elevation, percentage of bare ground, and lower soil nutrient levels and lower canopy cover. Early assessments of postfire stand conditions can guide rapid responses to nonnative plant invasions.     

大肠杆菌对赤子爱胜蚓体表超微结构的影响

以赤子爱胜蚓(Eisenia fetida)为实验动物,研究了细菌诱导(浸浴诱导和注射诱导)对蚯蚓体表超微结构的影响.结果表明:(1)用细菌浸浴4h的实验组、用细菌注射4h的实验组及对照组蚯蚓的角质层厚度分别为(0.51±0.03)μm、(0.56±0.02)μm、(0.50±0.01)μm;上角质层突起的高度分别为(0.16±0.02)μm、(0.12±0.01)μm、(0.11±0.01)μm;上角质层游离面中微绒毛的高度分别为(0.18±0.02)μm、(0.11±0.01)μm、(0.11±0.01)μm.统计分析表明,蚯蚓在抵御微生物侵袭过程中,体表角质层中的上角质层突起及上角质层游离面中的微绒毛发挥着重要作用.(2)细菌浸浴4h的实验组、用细菌注射4h实验组及对照组蚯蚓体表的表皮厚度分别为(2.63±0.15)μm、(2.23±0.06)μm、(1.97±0.15)μm;表皮中小颗粒蛋白细胞的颗粒直径分别为(0.38±0.04)μm、(0.26±0.02)μm、(0.24±0.02)μm;大颗粒粘液细胞的颗粒直径分别为(0.50±0.04)μm、(0.26±0.03)μm、(0.21±0.02)μm;网状粘液细胞的直径分别为(0.93±0.06)μm、(0.63±0.06)μm、(0.28±0.03)μm.统计分析表明,蚯蚓在抵御微生物侵袭的过程中,表皮中的腺细胞(小颗粒蛋白细胞、大颗粒粘液细胞及网状粘液细胞)发挥着重要作用.图4表2参17