Environmental impact assessment of a ceramic tile supply chain – a case study

The beginning of the twenty-first century saw a surge in the growth of construction industry, particularly the housing sector in India. This led to the growing demand of ceramic tiles. This growth is responsible for large-scale consumption of natural resources and generation of solid waste. The objective of this paper is to assess the environmental impact of vitrified ceramic floor tile supply chain by performing life cycle assessment (LCA) following international standards of ISO 14040 series guidelines. The impact has been determined by conducting a LCA using Umberto NXT software (eco-invent 3.0 database) with ReCiPe endpoint and midpoint methods. It has been found that the manufacturing stage of supply chain is generating highest impact on environment in all the categories. Impact analysis of different input resources/material shows that red oxide used in glaze preparation, electricity in manufacturing, packaging material, distribution by trucks, installation of tiles using concrete and disposal of packaging material are responsible for most of the environmental impact. This study will offer the essential quantitative assessment to recognise the phases and materials which are highly responsible for the degradation of environment so that appropriate interventions by the different stakeholders can be planed.     

Chemical characteristics and source apportionment of PM<Subscript>2.5</Subscript> using PCA/APCS,UNMIX, and PMF at an urban site of Delhi,India

The present study investigated the comprehensive chemical composition [organic carbon (OC), elemental carbon (EC), water-soluble inorganic ionic components (WSICs), and major & trace elements] of particulate matter (PM_2.5) and scrutinized their emission sources for urban region of Delhi. The 135 PM_2.5 samples were collected from January 2013 to December 2014 and analyzed for chemical constituents for source apportionment study. The average concentration of PM_2.5 was recorded as 121.9 ± 93.2 μg m^?3 (range 25.1–429.8 μg m^?3), whereas the total concentration of trace elements (Na, Ca, Mg, Al, S, Cl, K, Cr, Si, Ti, As, Br, Pb, Fe, Zn, and Mn) was accounted for ～17% of PM_2.5. Strong seasonal variation was observed in PM_2.5 mass concentration and its chemical composition with maxima during winter and minima during monsoon seasons. The chemical composition of the PM_2.5 was reconstructed using IMPROVE equation, which was observed to be in good agreement with the gravimetric mass. Source apportionment of PM_2.5 was carried out using the following three different receptor models: principal component analysis with absolute principal component scores (PCA/APCS), which identified five major sources; UNMIX which identified four major sources; and positive matrix factorization (PMF), which explored seven major sources. The applied models were able to identify the major sources contributing to the PM_2.5 and re-confirmed that secondary aerosols (SAs), soil/road dust (SD), vehicular emissions (VEs), biomass burning (BB), fossil fuel combustion (FFC), and industrial emission (IE) were dominant contributors to PM_2.5 in Delhi. The influences of local and regional sources were also explored using 5-day backward air mass trajectory analysis, cluster analysis, and potential source contribution function (PSCF). Cluster and PSCF results indicated that local as well as long-transported PM_2.5 from the north-west India and Pakistan were mostly pertinent.     

Assessment of background levels of trace metals in water and soil from a remote region of Himalaya

Selected trace metals were estimated by atomic absorption spectrometry in the water and soil samples collected from the remote region of Himalaya. The soil samples were analysed for soluble and acid extractable fraction of trace metals. In water samples, Ca, Na, Mg and K emerged as dominant contributors, whereas, Ca, Na, K, Mg, Fe and Pb were estimated at comparatively higher levels in the water extract of the soil. In case of acid extract of the soil samples, Ca, K, Fe, Mg, Mn and Na were found at elevated concentrations. Based on mean levels of the metals, following decreasing concentration order was observed in water samples: Ca > Na > Mg > K > Pb > Co > Cu > Zn > Mn > Cr > Fe > Cd > Li, however, in the acid extract of the soil, following order was noted: Ca > K > Fe > Mg > Mn > Na > Pb > Zn > Cr > Li > Cu > Co > Cd. The correlation study revealed appreciably diverse mutual relationships of trace metals in the water and soil samples. The multivariate cluster analyses exhibited divergent apportionment of trace metals in water and soil samples. Among the trace metals, Cd, Pb, Li, Zn, Cr, Cu, Mn and Co exhibited extreme to significant anthropogenic enrichment in the soil samples, while the rest of the metals were mostly contributed by the natural processes.     

Performance analysis of bioethanol (Water Hyacinth) on diesel engine

The increasing consumption and excessive extraction of conventional fuels is the matter of serious concern. Nowadays, world is looking for alternative sources of fuel which can partially replace conventional fuel dependence. The current investigation intends to provide evaluation of bio-ethanol preparation from Water Hyacinth (WH) and its influence on diesel engine performance under various operating conditions. This study explores the extraction of glucose from WH (Eichhornia crassipes) pretreated with sulfuric acid (H₂SO₄) for production of bio-ethanol. For the production of bio-ethanol different concentrations of H₂SO₄ acid hydrolysate (1%, 2%, 4%, 6%, 8%, and 10%) were prepared which was then followed by fermentation with cellulose fermenting yeasts. From results, it was observed that 4% H₂SO₄ acid hydrolysis produces higher concentrations of ethanol than other concentrations. Bio-ethanol extracted from WH was blended with diesel in different proportions (5%, 10%, 15%, 20%, and 25%) v/v and performance and emissions were experimentally investigated on single cylinder diesel engine under various load conditions. Experimental results show that 5 BED [5% bio-ethanol (WH + 95%diesel v/v) and 10BED (10% bio-ethanol (WH + 90%diesel v/v)] produces higher brake power, brake thermal efficiency and brake mean effective pressure with improved exhaust emission profiles than any other blend.     

Carbon capture,storage, and usage with microalgae: a review

Environmental Chemistry Letters - Global warming is induced partly by rising atmospheric carbon dioxide levels, calling for sustainable methods to sequester carbon. Here we review carbon capture,...     

Dynamics of pesticide residues in nectar and pollen of mustard (Brassica juncea (L.) Czern.) grown in Himachal Pradesh (India)

Residues dynamics of Endosulfan (525.00 g a.i. ha(-1)), Imidacloprid seed treatment (21 g a.i. kg(-1)), Lambdacyhalothrin (75.00 g a.i. ha(-1)) and Spiromesifen (225.00 g a.i. ha(-1)) in nectar and pollen of mustard, Brassica juncea (L.) Czern. grown in Himachal Pradesh (India) were determined through bioassay (using Drosophila melanogaster Meig. as test organism) and GC (Gas chromatographic) and HPLC (High performance liquid chromatographic) methods. In general chromatographic methods were more sensitive for the determination of above given pesticides compared to bioassay method. Average recoveries in nectar samples varied between 82.85 and 88.90% by bioassay and 91.20 and 93.55% by chromatographic techniques. In pollen samples, recoveries varied between 81.44 and 86.44% by bioassay and 88.50 and 91.30% by chromatographic methods. Imidacloprid residues were neither found in nectar nor in pollen samples at the time of sampling i.e. 50% of flowering. The order of average half life of residues was: Lambdacyhalothrin (12.45 h) < Spiromesifen (19.99 h) < Endosulfan (27.49 h) for nectar and Spiromesifen (9.69 h) < Lambdacyhalothrin (12.44 h) < Endosulfan (17.84 h) for pollen samples. It was found that Imidcloprid seed treatment was practically harmless to honey bees, whereas a waiting period of 5 days must be observed on crops sprayed with these chemicals during blooms to avoid any accidental hazards to honey bees.     

Effect of nicotine (plant extract) on sex-ratio of Drosophila melanogaster (Meigen)

Experiments were conducted by using nicotine (plant extract) for its toxic effects on Drosophila melanogaster, LC50 estimated is 2.9552 microl/100 ml. Studies revealed that nicotine affects adult emergence of males and females (sex-ratio) of mutant form (Yellow) of Drosophila melanogaster.