Natural biodegradation of wood preservatives

Natural biodegradation can contain groundwaters impacted by creosote and pentachlorophenol. Using natural biodegradation for such sites is attractive because groundwater restoration is often impracticable, but the dissolved plumes are biodegradable and exert relatively low oxygen demands. Three case studies of its successful use are presented, with emphasis on the types of evidence needed, the rates and extents of removal, and the strategies for incorporating natural biodegradation into a remediation approach. Natural biodegradation was proven at all three sites, using a combination of field geochemical measurements, laboratory simulations, and computer modeling. Contaminant plumes at these three sites were contained within 100 to 700 feet downgradient of the apparent sources, although the rates of biodegradation varied widely. Natural biodegradation should be considered as part of an overall remedial strategy for most sites contaminated by creosote and/or pentachlorophenol.     

Removal of selenate from water by zerovalent iron

Zerovalent iron (ZVI) has been widely used in the removal of environmental contaminants from water. In this study, ZVI was used to remove selenate [Se(VI)] at a level of 1000 microg L(-1) in the presence of varying concentrations of Cl-, SO(2-)4, NO(-)3, HCO(-)3, and PO(3-)4. Results showed that Se(VI) was rapidly removed during the corrosion of ZVI to iron oxyhydroxides (Fe(OH)). During the 16 h of the experiments, 100 and 56% of the added Se(VI) was removed in 10 mM Cl- and SO(2-)4 solutions under a closed contained system, respectively. Under an open condition, 100 and 93% of the added Se(VI) were removed in the Cl- and SO(2-)4 solutions, respectively. Analysis of Se species in ZVI-Fe(OH) revealed that selenite [Se(IV)] and nonextractable Se increased during the first 2 to 4 h of reaction, with a decrease of Se(VI) in the Cl- experiment and no detection of Se(VI) in the SO(2-)4 experiment. Two mechanisms can be attributed to the rapid removal of Se(VI) from the solutions. One is the reduction of Se(VI) to Se(IV), followed by rapid adsorption of Se(IV) to Fe(OH). The other is the adsorption of Se(VI) directly to Fe(OH), followed by its reduction to Se(IV). The results also show that there was little effect on Se(VI) removal in the presence of Cl- (5, 50, and 100 mM), NO(-)3 (1, 5, and 10 mM), SO(2-)4 (5 mM), HCO(-)3 (1 and 5 mM), or PO(3-)4 (1 mM) and only a slight effect in the presence of SO(2-)4 (50 and 100 mM), HCO(-)3 (10 mM), and PO(3-)4 (5 mM) during a 2-d experiment, whereas 10 mM PO(3-)4 significantly inhibited Se(VI) removal. This work suggests that ZVI may be an effective agent to remove Se from Se-contaminated agricultural drainage water.     

Integrating fisheries into the national development plans of Small Island Developing States (SIDS): Ten years on from Barbados

The development and effective introduction of strategies designed to ensure the ecologically and economically sustainable utilization of coastal and marine resources is perhaps the major challenge for Small Island Developing States (SIDS). In response, the 1994 Barbados Programme of Action (BPoA) called upon the SIDS to implement appropriate coastal and marine strategies and, crucially, ensure that such strategies were integrated into sustainable national development plans (NDPs). This article examines the extent to which contemporary NDPs and donor support programmes have incorporated the fisheries sector — arguably the most important coastal/marine resource for many SIDS — into such documents. Applying an assessment methodology, originally developed to identify levels of environmental mainstreaming within World Bank country assistance strategies to NDPs and donor support programmes, we are able to identify those SIDS who have most effectively integrated the fisheries sector into such documents. Comparison with data indicating the importance of the sector to the national economy (in terms of generating foreign exchange, employment generation and/or supporting domestic protein consumption levels) enables us to pinpoint those countries with substantial fisheries sectors, but a correspondingly lower than expected degree of sectoral mainstreaming. We suggest that the January 2005 review of the BPoA offers an opportune moment for such countries to redress these omissions.     

Spatial variability of soil phosphorus in relation to the topographic index and critical source areas: sampling for assessing risk to water quality

A measure of soil P status in agricultural soils is generally required for assisting with prediction of potential P loss from agricultural catchments and assessing risk for water quality. The objectives of this paper are twofold: (i) investigating the soil P status, distribution, and variability, both spatially and with soil depth, of two different first-order catchments; and (ii) determining variation in soil P concentration in relation to catchment topography (quantified as the "topographic index") and critical source areas (CSAs). The soil P measurements showed large spatial variability, not only between fields and land uses, but also within individual fields and in part was thought to be strongly influenced by areas where cattle tended to congregate and areas where manure was most commonly spread. Topographic index alone was not related to the distribution of soil P, and does not seem to provide an adequate indicator for CSAs in the study catchments. However, CSAs may be used in conjunction with soil P data for help in determining a more "effective" catchment soil P status. The difficulties in defining CSAs a priori, particularly for modeling and prediction purposes, however, suggest that other more "integrated" measures of catchment soil P status, such as baseflow P concentrations or streambed sediment P concentrations, might be more useful. Since observed soil P distribution is variable and is also difficult to relate to nationally available soil P data, any assessment of soil P status for determining risk of P loss is uncertain and problematic, given other catchment physicochemical characteristics and the sampling strategy employed.     

Facile Preparation of Chitosan Films for High Performance Removal of Reactive Blue 19 Dye from Aqueous Solution

This study aimed at finding effective strategies for high-performance removal of reactive blue 19 (RB19) dye from aqueous solution. Chitosan (CS) films had been prepared by using solvent casting with mild drying for this purpose. The CS films were characterized by X-ray diffraction, field-emission scanning electron microscopy, and Fourier transform infrared (FTIR) spectroscopy. The performance of RB19 removal using CS were evaluated by varying contact time, solution pH, initial dye concentration, and adsorbent dosage. Adsorption isotherms, kinetics, and desorption were investigated by batch experiments. Results showed that CS films exhibited the optimal adsorption performance for RB19 removal and high maximum adsorption capacities of RB19, which were 799 and 822.4 mg g^?1 at 20 and 40 °C, respectively. Adsorption kinetic data were well described by the pseudo-second-order kinetic model. FTIR analyses further indicated that interactions between RB19 and the CS film occurred during adsorption. The CS films also exhibited satisfactory desorption of RB19 at about 80 % after 30 min of desorption at pH 11. Our study demonstrated that the CS films can be easily prepared and applied for effective removal of RB19 in treatment of wastewater.     

Report on the fifth meeting of INRA’s national network of ecotoxicologists,ECOTOX

The fifth meeting of INRA’s national network of ecotoxicologists took place on 25 to 27 November 2014 in Biarritz, France. The main aim of the meeting was to bring together ecotoxicologists from INRA and associated partners, providing them ample opportunity to share and discuss their latest scientific results as well as the national policy of research in ecotoxicology and to precise perspectives for the network.