Arsenic contamination in the freshwater fish ponds of Pearl River Delta: bioaccumulation and health risk assessment

This study investigated the extent of arsenic (As) contamination in five common species of freshwater fish (northern snakehead [Channa argus], mandrarin fish [Siniperca chuatsi], largemouth bass [Lepomis macrochirous], bighead carp [Aristichthys nobilis] and grass carp [Ctenopharyngodon idellus]) and their associated fish pond sediments collected from 18 freshwater fish ponds around the Pearl River Delta (PRD). The total As concentrations detected in fish muscle and sediment in freshwater ponds around the PRD were 0.05–3.01 mg?kg^?1 wet weight (w. wt) and 8.41–22.76 mg?kg^?1 dry weight (d. wt), respectively. In addition, the As content was positively correlated (p?<?0.05) to total organic carbon (TOC) contents in sediments. Biota sediment accumulation factor (BSAF) showed that omnivorous fish and zooplankton accumulated higher concentrations of heavy metals from the sediment than carnivorous fish. In addition, feeding habits of fish also influence As accumulation in different fish species. In this study, two typical food chains of the aquaculture ponds were selected for investigation: (1) omnivorous food chain (zooplankton, grass carp and bighead carp) and (2) predatory food chain (zooplankton, mud carp and mandarin fish). Significant linear relationships were obtained between log As and δ ¹⁵N. The slope of the regression (?0.066 and ?0.078) of the log transformed As concentrations and δ ¹⁵N values, as biomagnifications power, indicated there was no magnification or diminution of As from lower trophic levels (zooplankton) to fish in the aquaculture ponds. Consumption of largemouth bass, northern snakehead and bighead carp might impose health risks of Hong Kong residents consuming these fish to the local population, due to the fact that its cancer risk (CR) value exceeded the upper limit of the acceptable risk levels (10^?4) stipulated by the USEPA.     

In Situ Measurement of Hydrochloric Acid in Rocket Exhaust Clouds Using a Remotely Piloted Aircraft

Abstract

An instrumentation system employing an RPV (remotely piloted vehicle) platform was developed for temporally and spatially resolved air pollution measurements, and was used to measure the evolution of gas-phase HC1 in exhaust clouds from a solid rocket motor firing and fuel pit burns. A thermistor and a sensitive (ppmv-level), rapid-response (<0.1 sec) infrared absorption sensor for HC1 were mounted in a flow channel in the RPV, permitting concentration and temperature measurements to be made in the cloud on a several-meter scale. The RPV system was flown in a series of field tests at Thiokol Corporation’s Elkton, MD division to evaluate the HC1 content of the exhaust products of a new Mg-based fuel formulation. Measurements were made in the clouds from Al-based and Mg-based solid fuel pit burns and a Mg-fueled motor firing over periods of several minutes. Elevated temperatures and HC1 concentrations were found to be temporally correlated with video images of the particulate cloud. Cl originating from the ammonium perchlorate oxidizer appeared in the exhaust as HC1 in each of the tests. Both the macroscopic and local cloud parameters indicate that the Mg-based fuel may provide some reduction in HC1 concentration compared to the standard Al-based fuel.     

Kinetic Sequential Sampling (KSS) System: An Automated Sampling System for Measuring Vertical Concentration Profiles of Airborne Particles

ABSTRACT

An electronically controlled lift system carrying a realtime particle monitor has been developed for sampling air sequentially, at different heights within the breathing zone. Data are automatically logged at the different receptor levels, for the determination of average vertical concentration profiles of airborne particulate matter. The system is easy to operate, portable, and easily extended to different heights or modified for use with other types of monitors (e.g., a portable CO analyzer). For measuring airborne particle concentrations, a Grimm Dust Monitor 1.104/5 was used. The results of trial runs, which were carried out indoors and in a relatively open semi-rural area, are presented, and applications of the kinetic sequential sampling (KSS) system are discussed.     

N2O emissions: modeling the effect of process configuration and diurnal loading patterns

The objective of this research was to develop a mechanistic model for quantifying N2O emissions from activated sludge plants and demonstrate how this may be used to evaluate the effects of process configuration and diurnal loading patterns. The model describes the mechanistic link between the factors recognized to correlate positively with N2O emissions. The primary factors are the presence of ammonia and nitrite accumulation. Low dissolved oxygen concentrations also may be implicated through differential impacts on ammonia-oxidizing bacteria (AOB) versus nitrite-oxidizing bacteria (NOB) activity. Factors promoting N2O emissions at treatment plants are discussed below. The model was applied to data from laboratory and pilot-scale systems. From a practical standpoint, plant configuration (e.g., plug-flow versus complete-mix), influent loading patterns (and peak load), and certain operating strategies (e.g., handling of return streams) are all important in determining N2O emissions.     

Risk assessment for human consumption of perfluorinated compound-contaminated freshwater and marine fish from Hong Kong and Xiamen

Perfluorinated compounds (PFCs) are man-made fluoro-surfactants that are identified as global pollutants and can pose health risks to humans and wildlife. Two aspects of risk assessment were conducted in this study, including exposure and response. Exposure was estimated by using the concentrations of PFCs in fish and applying standard exposure factors. Among different PFCs, PFOS, PFOA, PFNA, PFDA, PFUdA and PFTrDA were detected. Total concentrations of PFC in fish ranged from 0.27-8.4 ng g⁻¹ to 0.37-8.7 ng g⁻¹ respectively in Hong Kong and Xiamen. The calculated hazard ratio (HR) of PFOS for all fish was less than 1.0. However, the HR for mandarin fish in Hong Kong and bighead carp, grass carp and tilapia in Xiamen, had HR values of approximately 0.5, indicating that frequent consumption of these 4 more contaminated fish species might pose an unacceptable risk to human health. Our data support the notion that the released/disposed chemical pollutants into water systems make fish a source of environmental toxicants to humans. The risks and potential effects of PFCs to health of coastal population in the Pearl River Delta are of concern.     

Chlorinated vapor intrusion indicators,tracers, and surrogates (ITS): Supplemental measurements for minimizing the number of chemical indoor air samples—Part 1: Vapor intrusion driving forces and related environmental factors

Vapor intrusion (VI) assessment is complicated by spatial and temporal variability, largely due to compounded interactions among the many individual factors that influence the vapor migration pathway from subsurface sources to indoor air. Past research on highly variable indoor air datasets demonstrates that conventional sampling schemes can result in false negative determinations of potential risk corresponding to reasonable maximum exposures (RME). While high‐frequency chemical analysis of individual chlorinated volatile organic compounds (CVOCs) in indoor air is conceptually appealing, it remains largely impractical when numerous buildings are involved and particularly for long‐term monitoring. As more is learned about the challenges with indoor air sampling for VI assessment, it has become clear that alternative approaches are needed to help guide discrete sampling efforts and reduce sampling requirements while maintaining acceptable confidence in exposure characterization. Indicators, tracers, and surrogates (ITS), which include a collection of quantifiable metrics and tools, have been suggested as a potential solution for making VI pathway assessment and long‐term monitoring more informative, efficient, and cost‐effective. This review, compilation, and evaluation of ITS demonstrates how even low numbers of indoor air CVOC samples can provide high levels of confidence for representing the RME levels (e.g., 95th percentile) often sought by regulatory agencies for less than chronic effects. A two‐part compilation of available evidence for select low‐cost ITS is presented, with Part 1 focused on introducing the concepts of ITS, meteorologically based ITS, and the evidence from data‐rich studies to support lower cost CVOC VI assessments. Part 1 includes the results of quantitative analyses on two robust residential building VI datasets, where numerous supplemental metrics were collected concurrently with indoor air concentration data. These are supplemented with additional less‐intensive studies in different circumstances. These analyses show that certain ITS metrics and tools, including differential temperature, differential pressure, and radon (in Part 2), can provide benefits to VI assessment and long‐term monitoring. This includes indicators that narrow the assessment period needed to capture RME conditions, tracers that enhance understanding of the conceptual site model, and aid in the identification of preferential pathways and surrogates that support or substitute for CVOC sampling results. The results of this review provide insight into the scientifically supportable uses of ITS.     

Pyrolysis-GC-MS analysis of crude and heavy fuel oil asphaltenes for application in oil fingerprinting

A Pyrolysis – Gas Chromatography – Mass Spectrometry (Py-GC-MS) method was developed for the analysis and profiling of crude and heavy fuel oil asphaltenes, for application in oil fingerprinting. Asphaltenes were precipitated from ten geographically different oils using n-pentane, and analysed by Py-GC-MS. Alkane profiles and sulphur/aromatic profiles were used to compare the oils, and to correctly differentiate oils from different geographical regions. Py-GC-MS could not differentiate a weathered oil sample and a fresh oil sample from the same source. The results of this study support the findings from a previously developed FTIR method for asphaltene profiling.     

The Role of Observer Variation in Determining Rosgen Stream Types in Northeastern Oregon Mountain Streams1

Abstract: Consistency in determining Rosgen stream types was evaluated in 12 streams within the John Day Basin, northeastern Oregon. The Rosgen classification system is commonly used in the western United States and is based on the measurement of five stream attributes: entrenchment ratio, width‐to‐depth ratio, sinuosity, slope, and substrate size. Streams were classified from measurements made by three monitoring groups, with each group fielding multiple crews that conducted two to three independent surveys of each stream. In only four streams (33%) did measurements from all crews in all monitoring groups yield the same stream type. Most differences found among field crews and monitoring groups could be attributed to differences in estimates of the entrenchment ratio. Differences in entrenchment ratio were likely due to small discrepancies in determination of maximum bankfull depth, leading to potentially large differences in determination of Rosgen’s flood‐prone width and consequent values of entrenchment. The result was considerable measurement variability among crews within a monitoring group, and because entrenchment ratio is the first discriminator in the Rosgen classification, differences in the assessment of this value often resulted in different determination of primary stream types. In contrast, we found that consistently evaluated attributes, such as channel slope, rarely resulted in any differences in classification. We also found that the Rosgen method can yield nonunique solutions (multiple channel types), with no clear guidance for resolving these situations, and we found that some assigned stream types did not match the appearance of the evaluated stream. Based on these observations we caution the use of Rosgen stream classes for communicating conditions of a single stream or as strata when analyzing many streams due to the reliance of the Rosgen approach on bankfull estimates which are inherently uncertain.     

Dynamis CO2 quality recommendations

In the carbon capture and storage (CCS) chain, transport and storage set different requirements for the composition of the gas stream mainly containing carbon dioxide (CO₂). Currently, there is a lack of standards to define the required quality for CO₂ pipelines. This study investigates and recommends likely maximum allowable concentrations of impurities in the CO₂ for safe transportation in pipelines. The focus is on CO₂ streams from pre-combustion processes. Among the issues addressed are safety and toxicity limits, compression work, hydrate formation, corrosion and free water formation, including the cross-effect of H₂S and H₂O and of H₂O and CH₄.     

Fish Assemblage Responses to Forest Cover

We investigated whether fish assemblage structure in southern Appalachian streams differed with historical and contemporary forest cover. We compared fish assemblages in 2^nd–4^th order streams draining watersheds that had increased forest cover between 1950 and 1993 (i.e., reforesting watersheds). We sampled fish in 50 m reaches during August 2001 and calculated catch-per-unit-effort (CPUE) by taxonomic, distributional, trophic, reproductive, and thermal metrics. We assigned streams to reforestation categories based on cluster analysis of years 1950 and 1993 near-stream forest cover. The relationship between forest cover and assemblage structure was assessed using analysis of variance to identify differences in fish CPUE in five forest cover categories. Streams contained 23 fish species representing six families, and taxa richness ranged from 1 to 13 at 30 stream sites. Streams with relatively low near-stream forest cover were different from streams having moderate to high near-stream forest cover in 1950 and 1993. Fish assemblages in streams having the lowest amount of forest cover (53–75%) were characterized by higher cosmopolitan, brood hider, detritivore/herbivore, intermediate habitat breadths, run-pool dweller, and warm water tolerant fish CPUE compared to streams with higher riparian forest cover. Our results suggest that fish assemblage’s structural and functional diversity and/or richness may be lower in streams having lower recent or past riparian forest cover compared to assemblages in streams having a high degree of near-stream forest cover.