Occurrence of THMs and HAAs in experimental chlorinated waters of the Quebec City area (Canada)

Haloacetic acids (HAAs) and trihalomethanes (THMs) were generated in bench-scale chlorination experiments using treated waters (prior to final chlorination) of the three major drinking water utilities of the Quebec City area. The purpose was to investigate the formation and occurrence of these chlorination by-products (CBPs) on a seasonal basis. Data for HAAs, THMs and other physico-chemical parameters were produced through a six-month sampling program with variable conditions of water quality, water temperature, applied chlorine dose and reaction time. In waters from the three utilities, chloroform (THM specie), dichloroacetic and trichloroacetic acid (HAA species) were the most prevalent compounds due to the low concentrations of bromide in the utilities' raw waters. Significant differences in CBP occurrence were noted between the three utilities' chlorinated waters, mainly due to the type of disinfectant applied to raw water. The use of pre-ozonation, as opposed to pre-chlorination (or direct chlorination) in one of the utilities appears to be the major factor contributing to that utility's potential for compliance with current THM and future HAA standards. Seasonal variations in THMs and HAAs were mainly associated with variations in organic precursors and to changes in water temperature (two parameters which vary widely on a seasonal basis in surface waters of southern Quebec), with CBP occurrence at its highest in spring. Statistical correlations between HAAs and THMs were moderate and only temperature appeared to affect the preponderance of one CBP or the other. Finally, a regression analysis was carried out aimed at associating each CBP to water quality and the experimental parameters. Thanks to their predictive ability, multivariate models seem to be the tools with the best potential for decision-making purposes.     

Polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) distributions in the Bay of Marmara sea: Izmit Bay

In 1999, the concentrations of 16 polycyclic aromatic hydrocarbons (PAHs), the total PAH and polychlorinated biphenyls (PCBs) were measured in sea water, sediment and mussels collected along the coast of Izmit Bay, the most important bay of the Marmara Sea. The total-PAH concentrations, measured by Spectrofluorometry were in the range of 1.16-13.68 microg/l in sea water, in the range of 30.0 1670.0 microg/g dry weight in sediments and in the range from 5.67 to 14.81 microg/g wet weight in edible part of mussel. HPLC revealed Phenanthrene (three rings), chrysene (four rings) and benz[a]antracene (five rings) to be the dominant PAHs in sea water, while 16 different PAHs compounds were observed and measured in mussel samples. The most pollution occured at Dogu Kanali and Dil Deresi where were the main rivers containing wastes fall into the the Izmit Bay. Although the maximum mono-ortho PCB concentrations in sea water were measured in the Dil Deresi River (26.33 ng/l) and the Solventa? (22.19 ng/l) stations, maximum PCB concentrations in mussels were measured in the SEKA (28.11 microg/kg) and the Dil Deresi River (25.68 microg/kg). The dominant congeners of PCBs were from tetra to hexachlorobiphenyls. The toxicity equivalent values were very low in sea water and mussels.     

Toxicity of eight polycyclic aromatic compounds to red clover (Trifolium pratense), ryegrass (Lolium perenne), and mustard (Sinapsis alba)

The effect of eight polycyclic aromatic compounds (PACs) on the seed emergence and early life-stage growth of three terrestrial plants (Sinapsis alba, Trifolium pratense and Lolium perenne) were studied in a greenhouse, using a Danish agricultural soil with an organic carbon content of 1.6%. After three weeks of exposure, seed emergence and seedling weight (fresh weight and dry weight) were determined. Exposure concentrations were verified with chemical analysis. The substances tested were four polycyclic aromatic hydrocarbons (fluoranthene, pyrene, phenanthrene and fluorene), the N-, S-, and O-substituted analogues of fluorene (carbazole, dibenzothiophene and dibenzofuran, respectively), and the quinoline representative acridine. Seedling growth was a far more sensitive endpoint than seed emergence for all substances. Concentrations estimated to give a 20% reduction of seedling fresh weight (EC20-values) ranged from 36 to 290 mgkg(-1) for carbazole, 43 to 93 mgkg(-1) for dibenzofuran, 37 to 110 mgkg(-1) for dibenzothiophene, 140 to 650 mgkg(-1) for fluoranthene, 55 to 380 mgkg(-1) for fluorene, 37 to 300 mgkg(-1) for phenanthrene, and 49 to 1300 mgkg(-1) for pyrene. For acridine, no toxicity was observed within the concentration range tested (1-1000 mgkg(-1)). As illustrated by the EC20-values, there was a rather large difference in sensitivity between the species, and T. pratense was the most sensitive of the species tested.     

How an introduced seaweed can affect epibiota diversity in different coastal systems

Invasions by non-indigenous species have the potential to alter the biodiversity of recipient systems. The magnitude of this effect often depends on the nature of the invaded communities and the ecology of the invader. We investigated the impacts of the Japanese seaweed Sargassum muticum (Phaeophyceae, Fucales) on biodiversity in a rocky and sedimentary environment on two islands in the North Sea. In each case, we compared the epibiota of non-indigenous S. muticum with epibiota communities on taxonomically related and structurally similar native seaweed hosts. Total and average species richness on S. muticum were similar on the rocky shore (60 species and 22±6 species, respectively) and the sandy shore (64 species and 20±3 species, respectively). However, community structure and species composition differed significantly between the environments. On the rocky shore, another native fucoid seaweed, Halidrys siliquosa, supported an epibiota community very similar to that of the invader. On the sandy shore, the only other abundant native habitat-providing algal species was Fucus vesiculosus. This species supported a different and less diverse assemblage of associated taxa. We conclude that S. muticum enhances epibiota diversity in the sedimentary environment, probably by increasing the substratum availability and habitat heterogeneity. In contrast, it has negligible impacts on epibiota diversity in the rocky shore environment, where it does not represent a fundamentally new habitat component. We conclude that even within the same region, the consequences of non-indigenous species on biodiversity cannot be generalised but depend on the composition and structural complexity of the species in the recipient community. This paper is dedicated to Udo Schilling, Chief Diving Officer, Alfred Wegener Institute who trained all of the authors in the waters off Helgoland to be scientific divers. The work reported here and in previous publications has been made possible through Udo’s training and support. We remain grateful for his enthusiasm, effort and patience.     

Colonial recognition of fungus in the fungus-growing ant Acromyrmex subterraneus subterraneus (Hymenoptera: Formicidae)

Summary. Leaf cutting ants live in symbiosis with a basidiomycete fungus that is exploited as a source of nutrients for the ant larvae. Tests of fungus transport demonstrated that Acromyrmex subterraneus subterraneus workers discriminate concolonial fungus from alien fungus, and rejected the latter. Larvae and pupae of the ant were used as controls. Chemical analysis of the fungus revealed a great similarity between its hydrocarbon profile and that found on the ant brood. Experiments with lures showed that chemical extracts from the fungus are responsible for this discrimination process. Moreover, the presence of brood inside the fungus seemed to be important for discrimination of the fungus by workers. Resident workers accepted concolonial broodless fungus less than concolonial fungus inoculated with brood odor. Fungus seems to acquire colonial odor passively, simply by contact with the brood. The impact of fungus volume present in the nest on closure of the colony is discussed. We show here for the first time the importance of a symbiotic vegetal organism in colonial recognition in social insects. Received 14 April 2000; accepted 29 September 2000     

Fernmeßverfahren

The combination of remote sensing methods like Doppler lidar and FTIR allows remote determination of mass fluxes of gases. Doppler lidar measures the three-dimensional wind vector in the vicinity of diffuse sources, or the velocity of air in a chimney plume if an industrial complex is monitored. FTIR is a multicomponent remote sensing method for gas concentrations. The Fourier transformation of an interferogram of a Michelson interferometer within a FTIR system converts the recorded intensity (function of optical path length) to a spectral signal (function of wavenumber). Both information, velocity and concentration, give the mass fluxes of the tracer (gas). A first test was performed at Munich-Nord power station with FTIR and cw-Doppler lidar. Fluxes of CO₂, CO, NO, and HCl were determined. The results are in good agreement with the fluxes measured byin situ instruments of the power station. The method can be used to control industrial complexes from an outside observation site.