Online elemental analysis of process gases with ICP-OES: A case study on waste wood combustion

A mobile sampling and measurement system for the analysis of gaseous and liquid samples in the field was developed. An inductively coupled plasma optical emission spectrometer (ICP-OES), which is built into a van, was used as detector. The analytical system was calibrated with liquid and/or gaseous standards. It was shown that identical mass flows of either gaseous or liquid standards resulted in identical ICP-OES signal intensities. In a field measurement campaign trace and minor elements in the raw flue gas of a waste wood combustor were monitored. Sampling was performed with a highly transport efficient liquid quench system, which allowed to observe temporal variations in the elemental process gas composition. After a change in feedstock an immediate change of the element concentrations in the flue gas was detected. A comparison of the average element concentrations during the combustion of the two feedstocks showed a high reproducibility for matrix elements that are expected to be present in similar concentrations. On the other hand elements that showed strong differences in their concentration in the feedstock were also represented by a higher concentration in the flue gas. Following the temporal variations of different elements revealed strong correlations between a number of elements, such as chlorine with sodium, potassium and zinc, as well as arsenic with lead, and calcium with strontium.     

Serial polygyny and colony genetic structure in the monogynous queenless ant Diacamma cyaneiventre

Serial polygyny, defined as the temporal succession of several reproductive females in a colony, occurs in some monogynous social insects and has so far attracted little attention. Diacamma cyaneiventre is a queenless ponerine ant found in the south of India. Colonies are headed by one singly mated worker, the gamergate. After the death of the gamergate or her absence following colony fission, the gamergate is replaced by a newly eclosed nestmate worker. After a replacement, colonies go through short-lived periods in which two matrilines of sisters co-occur. This is a situation which can be described as serial polygyny. To measure the consequences of serial polygyny, a genetic analysis was performed on 449 workers from 46 colonies of D. cyaneiventre using five microsatellite loci. The presence of more than one matriline among workers of the same nest was detected in 19% of colonies, indicating a recent change of gamergate. The average genetic relatedness among nestmate workers was 0.751 and did not significantly differ from the theoretical expectation under strict monogyny and monandry (0.75). A simple analytical model of the temporal dynamics of serial polygyny was developed in order to interpret these results. We show that the rate of gamergate turnover relative to the rate of worker turnover is the crucial parameter determining the level of serial polygyny and its effect on the genetic structure of colonies. This parameter, estimated from our data, confirms that serial polygyny occurs in D. cyaneiventre but is not strong enough to influence significantly the average genetic relatedness among workers.     

Ecological changes and local knowledge in a giant honey bee (<Emphasis Type="Italic">Apis dorsata</Emphasis> F.) hunting community in Palawan,Philippines

One of the traditional livelihood practices of indigenous Tagbanuas in Palawan, Philippines is wild honey hunting and gathering from the giant honey bee (Apis dorsata F.). In order to analyze the linkages of the social and ecological systems involved in this indigenous practice, we conducted spatial, quantitative, and qualitative analyses on field data gathered through mapping of global positioning system coordinates, community surveys, and key informant interviews. We found that only 24% of the 251 local community members surveyed could correctly identify the giant honey bee. Inferential statistics showed that a lower level of formal education strongly correlates with correct identification of the giant honey bee. Spatial analysis revealed that mean NDVI of sampled nesting tree areas has dropped from 0.61 in the year 1988 to 0.41 in 2015. However, those who correctly identified the giant honey bee lived in areas with high vegetation cover. Decreasing vegetation cover limits the presence of wild honey bees and this may also be limiting direct experience of the community with wild honey bees. However, with causality yet to be established, we recommend conducting further studies to concretely model feedbacks between ecological changes and local knowledge.     

How to assess the feeding activity in ecotoxicological laboratory tests using enchytraeids?

The risk assessment of pesticides on soil fauna is an issue to protect agroecosystem sustainability. Enchytraeids are recognized as relevant soil bioindicators of chemical stress in agroecosystems. In laboratory, the reproduction test was found to be sensitive to reveal chemical impacts on enchytraeids. However, it does not allow to assess the impacts on ecological functions in which enchytraeids are involved. The objectives of this study were (i) to explore the feasibility of the bait-lamina test with enchytraeids under laboratory conditions and (ii) to compare its sensitivity with the Enchytraeid Reproduction Test. We exposed individuals of Enchytraeus albidus to two commercial formulations of fungicides widely used in Europe. The EC50 reproduction for the Swing^® Gold (50 g L^?1 epoxiconazole and 133 g L^?1 dimoxystrobin) and the Cuprafor micro^® (50% copper oxychloride) were respectively estimated at 1.66?±?0.93 times the recommended dose and >?496 mg kg^?1 of copper. However, no impact was found on the feeding activity of enchytraeids. The bait-lamina test thus appeared less sensitive than the Enchytraeid Reproduction Test to the tested fungicides. Despite that, this test which is achievable under laboratory conditions and allows assessing indirect effects of pesticides is quick, cheap, and easy to perform. It would deserve to be used to explore longer-exposure effects through the repeated addition of bait-lamina sticks.     

Sources and spatial distribution of heavy metals in scleractinian coral tissues and sediments from the Bocas del Toro Archipelago, Panama

Marine ecosystems worldwide are threatened by aquatic pollution; however, there is a paucity in data from the Caribbean region. As such, five heavy metals (arsenic, cadmium, copper, zinc, mercury) were measured in tissues of the scleractinian corals Porites furcata and Agaricia tenuifolia and in adjacent sediments in the Bocas del Toro Archipelago, Panama. Samples were collected from five reef sites along a gradient of distance from an international shipping port and were analysed using inductively coupled plasma optical emission spectrometry and atomic absorption spectrophotometry for mercury. Copper and zinc were the most abundant metals and ranged from 11 to 63 mg kg^?1 and from 31 to 185 mg kg^?1 in coral tissues, respectively. The highest concentration of each metal was measured in P. furcata tissues, with copper and mercury concentrations significantly higher in P. furcata than in A. tenuifolia at every site. These results suggest that P. furcata has a higher affinity for metal accumulation and storage than A. tenuifolia. With the exception of cadmium, metal concentrations in coral tissues were generally elevated at coral reefs in closer proximity to the port; however, this pattern was not observed in sediments. Hard coral cover was lowest at reefs in closest proximity to the port, suggesting that metal pollution from port-related activities is influencing hard coral abundance at nearby coral reefs.     

Modelling Gene Flow between Fields of White Clover with Honeybees as Pollen Vectors

The portion-dilution model is a parametric restatement of the conventional view of animal pollination; it predicts the level of pollinator-mediated gene dispersal. In this study, the model was applied to white clover (Trifolium repens) and its most frequent pollinator, the honeybee (Apis mellifera). One of the three parameters in the portion-dilution model is the mean number of flowers a pollinator visits in one foraging bout. An alternative method to estimate this parameter was developed that was not depending on pollinator hive-seeking behaviour. The new estimation method, based on nectar collection, seems to be a good alternative, when reliable observation on visiting behaviour of pollinators is not possible. The gene flow in white clover was modelled. Where fields were assumed to be well separated, and only a low fraction of bees travelled between fields, the gene flow was estimated to be 0.7%, but subjected to large uncertainty. In a worst case scenario with adjacent fields—one with a genetically modified (GM) T. repens cultivar and the other with a conventional T. repens cultivar—and where all arriving bees were expected to transfer GM pollen, the median gene flow was modelled to be 7% with an estimated 95% percentile of 70%. The results show that the European Union threshold limit of 0.9% GM admixture for food and feed will likely be exceeded at times and especially organic farmers that do not accept GM admixture and often have clover and clover–grass fields might face challenges with admixture of GM.     

Ammonia emissions from a broiler farm: spatial variability of airborne concentrations in the vicinity and impact on adjacent woodland

Agricultural NH₃ emissions affect air quality and influence the nitrogen cycle. In the subject study, NH₃ emissions from a broiler farm and the resulting atmospheric concentrations in the immediate vicinity during three growing cycles have been quantified. Additionally, vegetation along a transect in an adjacent woodland was analysed. The emissions were as high as 10 kg NH₃ h⁻¹ and the atmospheric concentrations ranged between 33 and 124 μg NH₃ m⁻³ per week in the immediate vicinity. Measurements of the atmospheric concentrations over 7 weeks showed a substantial decline of mean concentrations (based on a 3-week average) from ∼13 to <3 μg NH₃ m⁻³, at 45- and 415-m distance from the farm. Vegetation surveys showed that nitrophilous species flourished when they grew closest to the farm (their occurrence sank proportionately with distance). A clearly visible damage of pine trees was observed within 200 m of the farm; this illustrated the significant impact of NH₃ emissions from agricultural sources on the sensitive ecosystem.     

Water quality and bacteriology in an aquaculture facility equipped with a new aeration system

The HOBAS aeration system was tested to compare changes in environmental and bacteriological parameters in ponds growing Penaeus monodon during a single production cycle. The stocking density in the aerated pond was doubled to 12 post-larvae (PL) m^???2 in contrast to the non-aerated pond with 6 (PL) m^???2. Microbial abundance in the ponds ranged between 10^5???6 cells ml^???1. Among the physiological groups of bacteria enumerated, the heterotrophs dominated with an abundance of 10⁴ CFU ml^???1. Of the nitrogen and sulfur cycle bacteria, the nitrifiers flourished in the aerated pond and could maintain ammonia-N concentration within permissible levels. Bacterial activity also maintained sulfide concentrations at <?0.03 mg l^???1. Non-aerated conditions promoted denitrification maintaining nitrate concentration between 0.32 and 0.98 μM NO₃ ^???-N l^???1. However, a marked increase in ammonium content was observed in the non-aerated pond at the end of the culture period. Thus in high-density ponds, the aerators served to stimulate bacterial growth and activity which consequently maintained the quality of the water to match that of low-density ponds. Accordingly, these aerators could be effectively used to sustain higher yields. The effluent from the aerated pond is less likely to alter the redox balance of the receiving waters.