Polycyclic aromatic hydrocarbon (PAH) contamination of surface sediments and oysters from the inter-tidal areas of Dar es Salaam, Tanzania

Surface sediment and oyster samples from the inter-tidal areas of Dar es Salaam were analyzed for 23 polycyclic aromatic hydrocarbons (PAHs) including the 16 compounds prioritized by US-EPA using GC/MS. The total concentration of PAHs in the sediment ranged from 78 to 25,000 ng/g dry weight, while oyster concentrations ranged from 170 to 650 ng/g dry weight. Hazards due to sediment contamination were assessed using Equilibrium Partitioning Sediment Benchmarks and Threshold Effect Levels. Diagnostic indices and principle component analysis were used to identify possible sources. Interestingly, no correlation between sediment and oyster concentrations at the same sites was found. This is supported by completely different contamination patterns, suggesting different sources for both matrices. Hazard assessment revealed possible effects at six out of eight sites on the benthic communities and oyster populations. The contribution of PAH intake via oyster consumption to carcinogenic risks in humans seems to be low.     

My land? Your land? Scotland?—understanding sectoral similarities and differences in Scottish land use visions

Understanding agreement and differences between land use visions forms a first step for assessing and comparing alternative pathways towards a sustainable future. This study presents an analysis of 20 semi-structured interviews with representatives of the principal land use sectors in Scotland. The aim was to understand what, in their ideal vision, they would want rural Scotland to look like in 2050. Inductive content analysis was used to identify similarities and differences amongst interviewees. There was general agreement on the following: the importance of the environment; the wish for more partnerships, dialogue and collaboration; the desire for society to be more engaged and aware about land use; and a strong need for short-, medium- and long-term policies helping to achieve these goals. The most notable differences relate to land ownership and governance. The outcomes form a basis for further facilitated discussions, emphasising common ground and exploring where, how and to what degree land use sectors can prepare and plan in the light of uncertainties posed by Brexit and climate change. The method was effective for understanding commonalities and differences between stakeholder groups and is transferable to other countries or regions.

     

Metal-induced tolerance in the freshwater microbenthic diatom Gomphonema parvulum

The benthic diatom Gomphonema parvulum Kützing is a common species in both clean and metal contaminated rivers. Our aim was to investigate whether metal-induced tolerance could explain the persistance of this taxon under metal polluted conditions. G. parvulum strains were isolated from a Zn- and Cd-contaminated stream and from a relatively clean ("reference") stream. The strains were cultured in synthetic medium as mono-specific biofilms to maintain their specific benthic growth features. Moreover, the strain from the metal polluted stream was cultured in plain and Zn- and Cd-enriched synthetic medium. Short-term (5 h) toxicity experiments with Zn were performed with the strains using pulse amplitude modulated (PAM) fluorometry. Zn lowered significantly the minimal chlorophyll fluorescence (F0) and the photon yield (phi(p)) of the exposed strains after 5 h exposure. The actual Zn concentrations that caused a 50% reduction (EC50's) of the phi(p) of the strain from the metal polluted stream were significantly higher than those of the isolate from the unpolluted stream. The absence of tolerance to Cu of the "polluted" strain indicated that Zn tolerance resulted from specific induction by chronic exposure to Zn in the field. Observations on field biofilms confirmed a higher tolerance of the G. parvulum population from the polluted stream than of the G. parvulum population from the reference stream. A genetic nature of this metal adaptation was supported by the persistance of the Zn tolerance of the polluted strain 2 years after isolation.     

Hochwasser 2002

In August 2002, highly contaminated areas in the region of Bitterfeld, e.g. the floodplain of the creek Spittelwasser, as well as the adjacent regions of Jeßnitz and Raguhn, were submerged by the river Mulde. An input of mobilized contaminated sediments in residential areas was the matter of concern. The objective of the present study was to estimate the pollutants load on the basis of chemical and biological data and identify the sources of pollutants. Deposited sludge and flood water samples were assessed on the basis of biological and chemical analyses and in comparison with administrative reference values. The pollution of the investigated sites was rather heterogeneous. At several sites, tolerance limits of the German Klärschlammverordnung or the Bundesbodenschutzverordnung were clearly exceeded, e.g. for Pb, As and HCH. Organic extracts exhibited significant effects in several biotests. This may be relevant with respect to direct particle uptake via ingestion or respiration. Pollution patterns for heavy metals as well as for organic pollutants differed significantly from the pattern found in the Spittelwasser flood plain before the inundation, which is in contrast to the initial hypothesis of a possible transport of contaminated Spittelwasser sediments into residential areas. Interestingly, a correlation of chemical load and the overall biological effect could be shown. From the viewpoint of the precautionary principle, the identification of the compounds exerting toxic effects and of the respective pollutant sources would be desirable.     

Optimizing Bankfull Discharge and Hydraulic Geometry Relations for Streams in New York State1

Mulvihill, Christiane I. and Barry P. Baldigo, 2012. Optimizing Bankfull Discharge and Hydraulic Geometry Relations for Streams in New York State. Journal of the American Water Resources Association (JAWRA) 48(3): 449-463. DOI: 10.1111/j.1752-1688.2011.00623.x Abstract: This study analyzes how various data stratification schemes can be used to optimize the accuracy and utility of regional hydraulic geometry (HG) models of bankfull discharge, width, depth, and cross-sectional area for streams in New York. Topographic surveys and discharge records from 281 cross sections at 82 gaging stations with drainage areas of 0.52-396 square miles were used to create log-log regressions of region-based relations between bankfull HG metrics and drainage area. The success with which regional models distinguished unique bankfull discharge and HG patterns was assessed by comparing each regional model to those for all other regions and a pooled statewide model. Gages were also stratified (grouped) by mean annual runoff (MAR), Rosgen stream type, and water-surface slope to test if these models were better predictors of HG to drainage area relations. Bankfull discharge models for Regions 4 and 7 were outside the 95% confidence interval bands of the statewide model, and bankfull width, depth, and cross-sectional area models for Region 3 differed significantly (p < 0.05) from those of other regions. This study found that statewide relations between drainage area and HG were strongest when data were stratified by hydrologic region, but that co-variable models could yield more accurate HG estimates in some local regional curve applications.     

Interpreting major industrial landscapes: Social follow-up on meanings, the case of two aluminium smelters, Alcan (Alma, Canada) and Pechiney (Dunkirk, France)

Landscape is becoming an object of growing social concern and, as such, an object of mediation between major industrial producers and local communities. The question of the capacity of environmental assessment to address this issue is thus raised. Until now, landscape studies have focused on visual aspects, although subjective dimensions such as perceptions and meanings have been recognised. The research in this article concerns the subjective dimensions, and is presented with a view to further the understanding of the process of the social interpretation of landscape as it relates to heavy industrial sites. Within a socioconstructivist perspective, two case studies (a longitudinal follow-up and an ex-post) of two aluminum smelters, one in Alma (Quebec, Canada) and the other in Dunkirk (France) were conducted. The results show that nearby residents' interpretations of landscape varied according to three sets of factors related to 1) the dynamics of regional development and the historical place of industry in the community, 2) the relationship between residents and the industry and local governance capacities, and 3) the social impacts experienced. To conclude, three ways of using qualitative methodologies for social and environmental follow-up in a socioconstructivist approach to landscape are proposed.     

Choosing a sustainable demolition waste management strategy using multicriteria decision analysis

This paper presents an application of the ELECTRE III decision-aid method in the context of choosing a sustainable demolition waste management strategy for a case study in the city of Lyon, France. This choice of waste management strategy takes into consideration the sustainable development objectives, i.e. economic aspects, environmental consequences, and social issues. Nine alternatives for demolition waste management were compared with the aid of eight criteria, taking into account energy consumption, depletion of abiotic resources, global warming, dispersion of dangerous substances in the environment, economic activity, employment, and quality of life of the local population. The case study concerned the demolition of 25 buildings of an old military camp. Each alternative was illustrated with different waste treatments, such as material recovery, recycling, landfilling, and energy recovery. The recommended solution for sustainable demolition waste management for the case study is a selective deconstruction of each building with local material recovery in road engineering of inert wastes, local energy recovery of wood wastes, and specific treatments for hazardous wastes.     

Allele-specific amplification for preimplantation genetic diagnosis (PGD) of spinal muscular atrophy

We have developed a new allele-specific amplification method for the preimplantation genetic diagnosis (PGD) of spinal muscular atrophy (SMA; Werdnig-Hoffmann disease) from a single cell. This method is based on the detection of the deletion of exon 7 of the telomeric copy of the survival motor neurone (SMN^t) gene. An oligonucleotide was designed to be specific to the SMN^t nucleotidic sequence with exonic mismatch G (for SMN^t)→A (for SMN^c) at its 3′ end. This test produces reliable PCR products in 95% of single lymphoblasts (85/88) tested as well as in 16/16 blastomeres from normal controls. Specificity analysis showed that we were able to detect homozygous deletion of the SMN^t gene in 99% of single lymphoblasts (103/104) from a SMA patient. No contamination was detected in 68 blanks tested. Multiple cell and DNA dilution analysis revealed that the test is accurate and specific up to 100 pg DNA and should thus also be suitable for PGD at the blastocyst stage. This rapid procedure requires a single round of fluorescent PCR and no restriction digestion, while previously described single cell methods include nested PCR followed by restriction enzyme digestion. Two PGD cycles for SMA using this procedure were performed in our centre. Copyright © 2001 John Wiley & Sons, Ltd.