Temporal patterns in reproduction may explain variationin mating frequencies in the green-veined white butterfly Pieris napi

There is genetic variation in the female mating rate in the green-veined white butterfly (Pieris napi), and females benefit from male ejaculates that contain both sperm and accessory gland substances. Although polyandry corresponds to higher lifetime fecundity than monandry, some females abstain from remating irrespective of the number of available mates. Explaining genetic variation in mating rates requires that monandrous females perform better than polyandrous ones under some conditions. We experimentally explored the reproductive performance of females either with a low or high intrinsic mating rate by allowing them to mate, feed, and lay eggs freely in a laboratory. Individual females followed different life histories: during the early days of reproduction, females with a low mating rate produced more eggs than females with a high mating rate. Hence, refraining from the benefits of multiple mating may be beneficial, if the time for reproduction is limited, or other female traits associated with polyandry are traded off against longevity. Given the day length of 10 h, a model shows that even if polyandrous females enjoy higher lifetime reproductive success, changeable and unpredictable weather will favor monandry if each period of suitable weather lasts, on average, less than 5 days. Thus, a combination of life history cost and unpredictability of fitness may explain the maintenance of monandry in the wild. Our results are also consistent with the observation that frequency of monandry increases with latitude.     

A worldwide survey of polychlorinated dibenzo-p-dioxins, dibenzofurans, and related contaminants in butter

The main source of human exposure to persistent organic pollutants (POPs) is, in general, food. In this study, 64 butter samples from 37 countries were analyzed to assess the global contamination of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), biphenyls (PCBs), hexachlorobenzene (HCB), and 2,2-bis (4-chlorophenyl)-1,1,1-trichloroethane (DDT) together with its major metabolites. The objectives of the study were to assess the presence of major organohalogen contaminants in butter, to trace geographical differences, and to determine toxic equivalents (TEQs) of PCDDs/Fs and dioxin-like PCBs in butter. The highest PCDD/F concentrations were found in butter from Korea with an average of 1.4 pg TEQ g(-1) lipid weight (l.w.). from PCDD/F and an additional contribution from the non- and mono-ortho-PCBs of 0.55 pg TEQ g(-1) l.w. Belgian butter showed average levels of 0.53 and 1.2 pg TEQ g(-1) l.w. for PCDDs/Fs and PCBs, respectively, but one sample of Belgium butter had a total TEQ level as high as 4.0 pg TEQ g(-1) l.w. Three out of five butter samples from Portugal showed similarly high PCDD/F TEQ levels. The sigmaPCB levels in European butter appeared to be somewhat higher than in the samples from the rest of the world. The average contribution of CB-153 to the total PCB concentration was 22% (SD 6.4, coefficient of variation 29%). Generally, the PCBs contributed around 60% of the total TEQ value, with CB-126 contributing approximately half of this value. This shows the important TEQ contribution from dioxinlike PCBs to the total TEQs. The highest HCB levels were found in butter samples from Russia, Ukraine, Belgium, and Slovenia. Low levels of HCB in butter were generally found in the Southern Hemisphere. Butter samples from countries from Eastern Europe had elevated sigmaDDT concentrations, with a particularly high concentration in Ukraine butter, followed by some Russian samples, Brazil, and the U.S.     

Removal of DEHP in composting and aeration of sewage sludge

The potential of composting and aeration to remove bis(2-ethylhexyl) phthalate (DEHP) from municipal sewage sludge was studied with two dewatered sludges: raw sludge and anaerobically digested sludge. Composting removed 58% of the DEHP content of the raw sludge and 34% of that of the anaerobically digested sludge during 85 days stabilisation in compost bins. A similar removal for the anaerobically digested sludge was achieved in a rotary drum in 28 days. Less than 1% of DEHP was removed with the compost leachate. Although DEHP removal was greater from raw sludge compost than anaerobically digested sludge compost, the total and volatile solids removals were on the same level in the two composts. In the aeration of raw sludge at 20 degrees C the DEHP removals were 33-41% and 50-62% in 7 and 28 days, respectively. Both composting and aeration are concluded to have the potential to reduce the DEHP contents typically found in sewage sludges to levels acceptable for agricultural use.     

Assessing sediment toxicity and arsenite concentration with bacterial and traditional methods

Three sediment samples LP (pool where logs are stored), LF (brook through landfill area), KN (Kaskesniemi) which is in Lake Pyh?selk? downstream from the mill, were taken from an old sawmill area and one from the unpolluted Lake H?yti?inen. The arsenite concentration was measured by GFAAS and two arsenite biosensing bacterial strains Pseudomonas fluorescens OS8 (pTPT31) and Escherichia coli MC1061 (pTOO31). The toxicity of sediment and pore water samples was determined by using luminescent bacteria (Flash test) and, further, whole sediment toxicity was measured using 10 days growth test and 50 days emergency test with midges (Chironomus riparius). With the flash test a lowered EC50 value was found only in sediment LF (EC50=0.17 v/v%). The Flash test indicated that all sediment samples taken from the sawmill area were highly toxic to bacteria, whereas growth and the emergence of chironomids showed no effects in other samples than LF. The midges tolerate well the contaminated environment. In contrast, bioavailability of arsenite of sediment samples KN and LF was quite high determined using the biosensor-strains in a direct contact assay. The bioavailable fraction of sediment LP was 6-10% out of the total arsenite concentration obtained with GFAAS (0.46-0.77 microg g-1 dw). The results show that the choice of analysis method grossly affects the outcome without any of the method giving an incorrect result. Different methods measure different parameters of a toxic sample and can thus be used to complement each other.     

Toxicokinetics,toxicity and lethal body residues of two chlorophenols in the oligochaete worm,Lumbriculus variegatus,in different sediments

Bioavailability, toxicokinetics and toxicity (LC(50)) of water- and sediment-associated 2,4,5-trichlorophenol (2,4,5-TCP) and pentachlorophenol (PCP) were measured in Lumbriculus variegatus Müller in a set of experiments. The critical body residue approach was applied by measuring also the lethal body residues (LBR(50)). Freshwater and three different sediments with various sediment organic carbon (SOC) concentrations were used as exposure media. SOC decreased the bioavailability of both chlorophenols, and the uptake rates decreased by 81% and 91% for 2,4,5-TCP and PCP, respectively, in the sediment with a SOC of 6.9% compared to those in sediment with a SOC of 0.5%. SOC appeared to be an important factor controlling the bioavailability as after the carbon normalisation the difference between the sediments was much smaller. The 96-h LC(50) values for instance for PCP were 145.3 microg/l in freshwater, and 6.8 and 8.1 microg/g dry weight in sediments with SOC concentrations of 0.5% and 2.4%, respectively. The LBR(50) values, were practically the same in freshwater and sediments: between 1.0 and 1.6 and from 0.4 to 0.9 micromol/g wet weight for 2,4,5-TCP and PCP, respectively, demonstrating the usefulness of this method for accurate, and more comparable, measurement of toxicity of chemicals with the same mode of toxic action in varying conditions. L. variegatus expressed a dose-response sediment avoidance behaviour but the PCP tissue concentrations were not affected by this behaviour.     

Bioaccumulation of PAHs from creosote-contaminated sediment in a laboratory-exposed freshwater oligochaete, Lumbriculus variegatus

The oligochaete, Lumbriculus variegatus, was used for a bioaccumulation assay in the creosote-contaminated sediment of Lake J?ms?nvesi in a 28-day experiment. The PAH concentrations of the whole body tissue of worms, sediments and water samples were determinated by GC-MS. Chemical analyses showed that benzo(k)fluoranthene, anthracene and fluorene were the main PAH compounds present in the tissue of oligochaetes, just as in the sediment. The biota-sediment accumulation factors (BSAFs) of the individual PAHs varied from 1.2 to 5.7. It is concluded that oligochaetes have a marked ability to accumulate and retain PAHs from creosote-contaminated sediment.     

Polychlorinated biphenyls in diseased lesser black-backed gull (Larus fuscus fuscus) chicks from the Gulf of Finland

Diseases due to the degeneration of the liver and various other internal organs were the major cause of the exceedingly high chick mortality in lesser black-backed gulls (Larus fuscus fuscus) in the central Gulf of Finland, Baltic Sea, during 1991-1993. The same symptoms were found in chicks of common gulls (Larus canus) and herring gulls (Larus argentatus) from the same focal area, although at a much lower frequency. We found disproportionately high concentrations of polychlorinated biphenyls (PCBs) in liver relative to leg muscle in lesser black-backed chicks compared with common gull and herring gull chicks. The causality between PCB residues and chick diseases remains unknown. No signs of chick edema disease or abnormal frequency of embryonic deaths, commonly associated with organochlorines in biota, were found. It is concluded that studies made in a very small geographical area may not give a good correlation between dose and effect due to an even greater variation in tolerance. Another explanation is that the diseases may not have been PCB-induced.     

Variation in ozone sensitivity among clones of Betula pendula and Betula pubescens

Forty clones of Betula pendula and 6 clones of Betula pubescens, originating from southern and central Finland, were ranked in order of ozone sensitivity according to visible injuries, growth and leaf senescense under low ozone exposure. The plants were fumigated in natural climatic conditions using an open-air exposure system during two growing seasons. Control plants were grown under ambient air, and the elevated-ozone exposures were 1.6x the ambient in 1994 and 1.7x the ambient in 1995. The differences in ozone sensitivity among clones were large. Ozone tolerance was related to thicker leaves and higher stomatal density as compared to sensitive clones. Ultrastructural ozone-induced symptoms were found in chloroplasts of sensitive clones. Increased number of visibly injured leaves on fumigated plants was correlated with reduced leaf formation, foliage area, shoot dry wt and number of stomata, and increased yellowing of leaves. The results suggest that a considerable proportion of birch trees, showing high sensitivity to ozone, are at risk if ambient ozone exposures increase.     

Airborne PCB as a contamination risk on freeze-drying of sediment

In a study of polychlorinated biphenyls (PCB) in freeze-dried sediments from Swedish lakes, the samples were found to contain unexpectedly high concentrations of PCBs. In one of the lakes (Bj?rken), e.g. the concentration of PCB-28 was found to be 189 ng/g dw after freeze-drying compared to 7 ng/g dw after air-drying of the sediment and therefore our hypothesis was that the contamination had occurred during the freeze-drying procedure. Hence, a dry reference sediment (RS) was used in order to identify potential sources of PCB contamination. The investigation included freeze-drying of the dry RS in five different laboratories, exposure to the air in the freeze-drying room, storage at room temperature and air-drying in a certain fume hood and in a laminar flow clean bench. The pattern and concentrations of PCBs detected in the exposed RS were strongly influenced by low chlorinated PCB congeners under all of these conditions with exception for air-drying in the fume hood. Storage in the laboratory air resulted in a slight elevation in the concentrations of low chlorinated PCB congeners, whereas higher concentrations of all PCB congeners were observed after freeze-drying. In all experiments the contamination appeared to be due to adsorption of PCB from the laboratory air. On the basis of these findings we recommend that reference material be subjected to the entire procedure, including sample preparation, in order to monitor contamination and that a procedure involving solvent extraction of wet sediment samples is used, whenever possible, instead of procedures involving dry samples.     

Fine particle (PM2.5) measurement methodology, quality assurance procedures, and pilot results of the EXPOLIS study

EXPOLIS is a European multicenter (Athens, Basel, Grenoble, Helsinki, Milan, and Prague) air pollution exposure study. It is the first international, population-based, large-scale study, where personal exposures to PM2.5 aerosol particles (together with volatile organic compounds and carbon monoxide) are being monitored. EXPOLIS is performed in six different centers across Europe, the sampled aerosol concentrations vary greatly, and the microenvironmental samples are not collected with the same equipment as the personal samples. Therefore careful equipment selection, methods development and testing, and thorough quality assurance and quality control (QA & QC) procedures are essential for producing reliable and comparable PM2.5 data. This paper introduces the equipment, the laboratory test results, the pilot results, the standard operating procedures, and the QA & QC procedures of EXPOLIS. Test results show good comparability and repeatability between personal and microenvironmental monitors for PM2.5 at different concentration levels measured across Europe in EXPOLIS centers.