Dynamics of nitrogen,phosphorus, algal biomass,and suspended solids in an artificial lentic ecosystem and significant implications of regional hydrology on trophic status

Chemical and biological parameters were analyzed to examine how regional hydrological fluctuations influence water quality of a artificial lentic ecosystem over a two-year period The intensity of seasonal monsoon rain accounted for most of annual inflow and discharge and influenced flow pathway (interflow vs. overflow), resulting in a modification of chemical and biological conditions. Sharp contrasting interannual hydrology of intense vs. weak monsoon occurred during the study. The intense monsoon disrupted thermal stratification and resulted in ionic dilution, high TP and high inorganic solids (NVSS) in the headwater reach. The variation of NVSS accounted 75% of TP variation (slope = 4.14, p < 0.01, n = 48). Regression analysis of residual chlorophyll-a (Chl) versus flushing rate indicated that short hydraulic retention time and high mineral turbidity affected algal growth in the headwater reach during summer monsoon. In contrast, severe drought during weak monsoon produced strong thermal stratification, low inorganic solids, high total dissolved solids (TDS), and low TP in the entire system. In addition, Chl concentrations were controlled by phosphorus. Based on the physical, chemical and biological parameters, riverine conditions, dominated during the intense monsoon, but lacustrine conditions were evident during the weak monsoon. The interannual dynamics suggest that monsoon seasonality is considered the main forcing factor regulating overall functions and processes of the waterbody and this characteristic has an important implication to eutrophication of the system.     

Long-term engineering properties of recycled plastic lumber used in pier construction

Plastic lumber manufactured using post consumer waste plastic has been proposed as an acceptable material for use in the construction of docks, piers and bulkheads and is touted to outlast conventional wood products due to its strength, durability and resistance to rot. This study examines the long-term engineering properties of plastic lumber manufactured using post consumer waste plastic (TRIMAX, Ronkonkoma, NY). Plastic lumber profiles were used in the decking of a pier built in West Meadow Creek, Old Field, NY during December 1995. Samples of plastic lumber were removed from the deck of the pier periodically over a two-year period and returned to the laboratory for testing. Results of engineering tests showed the in-plane compression modulus (260±30 MPa), dimensional stability and the Shore D surface hardness (60±2) of plastic lumber removed from the pier remained similar to or greater than their pre-placement values. In contrast, significant changes in the modulus of elasticity of plastic lumber were measured with prolonged weathering. The modulus of elasticity of plastic lumber initially decreased from 1370 Pa to 750 Pa following 12 months weathering, a decrease equal to 45% of its pre-placement value and then increased during the second year to close to its initial value. The high variability in the modulus of elasticity should restrict the use of plastic lumber profiles to non-load bearing structural applications.     

The use of ultraviolet germicidal irradiation (UVGI) in disinfection of airborne bacteria

Contamination of indoor air by microbial pollutants has been increasingly recognized as a public health problem, and may be responsible for building-related illness (BRI) and sick-building syndrome (SBS). Bioaerosols such as fungi, bacteria, and viruses in indoor air can cause allergic and irritant responses, infectious diseases, respiratory problems, and hypersensitivity reactions. People sensitive to indoor environmental problems complain of a wide variety of symptoms ranging from headache, fatigue, nausea, sinus congestion, to eye, nose, and throat irritations.Although ultraviolet germicidal irradiation (UVGI) with a predominant wavelength of 254 nm has been used for air disinfection for many years to minimize microbial numbers in the air, few quantitative data are available on the radiation susceptibilities of individual airborne microbes. There have been a number of UVGI studies documenting the effectiveness of UVGI for the control of microbes in controlled settings. Many of these studies documented the effectiveness of UVGI against airborne tuberculosis organisms.The studies described here used commercial type fan-powered shielded UVGI-containing fixtures to evaluate their effectiveness in air disinfection. Aerosolization tests were done in the contained environment of a negative pressure bioaerosol stainless steel testing chamber 0.75 m wide·3.7 m long. The chamber was designed so that microbes could be safely aerosolized and contained while traversing the chamber through the UVGI-containing fix-tures. Four commercial (Purair UV Germicidal Systems, Mount Vernon, N.Y.) fan-powered UVGI-containing fix-tures placed in the chamber were individually evaluated for their ability to disinfect individual bioaerosols of air-borne bacteria.Air samples were taken at the inlet and outlet of the UVGI-containing units positioned in the bioaerosol chamber, using Ace Glass all-glass impingers (AGI-30). Five bacterial species were individually aerosolized to evaluate their kill. The bacteria used to test all of the UVGI-containing units were vegetative cells of Escherichia coli, Micrococcus luteus, Pseudomonas fluorescens, Staphylococcus aureus, and endospores of Bacillus subtilis. Based upon the concentration of bioaerosols collected at the inlet and outlet of the fixtures tested, the total overall microbial kills for the four fixtures with the filters in place and the UVGI units on were more than 99% for all the airborne vegetative bacteria tested, and a mean of over 75% for the B. subtilis endospores.All of the fixtures were efficient in the kill of the test vegetative bacteria used, even the more UVGI-resistant M. luteus vegetative cells and endospores of B. subtilis. Units such as these may provide an economical way to supplement existing air cleaning procedures used in indoor environments, and to kill airborne bacteria effectively without human exposure to UV light.     

Repeated hydrogen peroxide dosing briefly reduces cyanobacterial blooms and microcystin while increasing fecal bacteria indicators in a eutrophic pond

This study explored the effects of H₂O₂ on Cyanobacteria and non-target microbes using fluorometry, microscopy, flow cytometry, and high throughput DNA sequencing of the 16S rRNA gene during a series of mesocosm and whole-ecosystem experiments in a eutrophic pond in NY, USA. The addition of H₂O₂ (8 mg/L) significantly reduced Cyanobacteria concentrations during a majority of experiments (66%; 6 of 9) and significantly increased eukaryotic green and unicellular brown algae in 78% and 45% of experiments, respectively. While heterotrophic bacteria declined significantly following H₂O₂ addition in all experiments, bacteria indicative of potential fecal contamination (Escherichia coli, Enterococcus, fecal coliform bacteria) consistently and significantly increased in response to H₂O₂, evidencing a form of ‘pollution swapping’. H₂O₂ more effectively reduced Cyanobacteria in enclosed mesocosms compared to whole-ecosystem applications. Ten whole-pond H₂O₂ applications over a two-year period temporarily reduced cyanobacterial levels but never reduced concentrations below bloom thresholds and populations always rebounded in two weeks or less. The bacterial phyla of Cyanobacteria, Actinobacteria, and Planctomycetes were the most negatively impacted by H₂O₂. Microcystis was always reduced by H₂O₂, as was the toxin microcystin, but Microcystis remained dominant even after repeated H₂O₂ treatments. Although H₂O₂ favored the growth of eukaryotic algae over potentially harmful Cyanobacteria, the inability of H₂O₂ to end cyanobacterial blooms in this eutrophic waterbody suggests it is a non-ideal mitigation approach in high biomass ecosystems and should be used judiciously due to potential negative impacts on non-target organisms and promotion of bacteria indicative of fecal contamination.     

The effect of queen pheromones on worker honey bee ovary development

We report results that address a long-standing controversy in honey bee biology, the identity of the queen-produced compounds that inhibit worker honey bee ovary development. As the honey bee is the only organism for which identities have been proposed for any pheromone that regulates reproduction, the resolution of its identity is of broad significance. We examined the effects of synthetic honey bee queen mandibular pheromone (QMP), four newly identified queen retinue pheromone components, and whole-queen extracts on the ovary development of caged worker bees. The newly identified compounds did not inhibit worker ovary development alone, nor did they improve the efficacy of QMP when applied in combination. QMP was as effective as queen extracts at ovary regulation. Caged workers in the QMP and queen extract treatments had better developed ovaries than did workers remaining in queenright colonies. We conclude that QMP is responsible for the ovary-regulating pheromonal capability of queens from European-derived Apis mellifera subspecies.     

In situ modification of an aquifer material by a cationic surfactant to enhance retardation of organic contaminants

Sorption of hexadecyltrimethylammonium chloride (HDTMA), a cationic surfactant, on aquifer material from Columbus AFB, Mississippi, U.S.A., was examined. Transport studies using flow-through columns and a box model aquifer showed that an almost stationary zone of HDTMA-modified aquifer material could be produced in situ without a significant decrease in hydraulic conductivity.Perchloroethylene (PCE) and naphthalene sorption isotherms on the HDTMA-modified aquifer material were linear, and sorption coefficients were increased by over two orders of magnitude relative to the unmodified material. The retardation of PCE by insitu emplaced HDTMA zones within a column was examined. Agreement between batch- and column-derived sorption coefficients and breakthrough curve symmetry indicates that local equilibrium was attained. Significant retardation of a naphthalene plume by an in situ emplaced surfactant zone was demonstrated in the box model aquifer system.The experimental results indicate that it is feasible to create in situ a sorbent zone within an aquifer using cationic surfactants. In most situations, the sorbent zone concept needs to be coupled with contaminant degradation processes for sorbent emplacement to be a practical tool in the remediation of groundwater contamination sites. Sorbent zones may be of benefit in the engineering of suitable environments for microbial or abiotic degradation reactions and by providing time slow reactions to occur.     

Six interaction profiles for simple mixtures

The Agency for Toxic Substances and Disease Registry (ATSDR) has a program for chemical mixtures that encompasses research on chemical mixtures toxicity, health risk assessment, and development of innovative computational methods. ATSDR prepared a guidance document that instructs users on how to conduct health risk assessment on chemical mixtures (Guidance Manual for the Assessment of Joint Toxic Action of Chemical Mixtures). ATSDR also developed six interaction profiles for chemical mixtures. Two profiles were developed for persistent environmental chemicals that are often found in contaminated fish and also can be detected in human breast milk. The mixture included chlorinated dibenzo-p-dioxins, hexachlorobenzene, dichlorodiphenyl dichloroethane, methyl mercury, and polychlorinated biphenyls. Two profiles each were developed for mixtures of metals and mixtures of volatile organic chemicals (VOCs) that are frequently found at hazardous waste sites. The two metal profiles dealt with (a) lead, manganese, zinc, and copper; and (b) arsenic, cadmium, chromium, and lead; the two VOCs mixtures dealt with (a) 1,1,1-trichloroethane, 1,1-dichloroethane, trichloroethylene, and tetrachloroethylene; and (b) benzene, ethylbenzene, toluene, and xylenes (BTEX). Weight-of-evidence methodology was used to assess the joint toxic action for most of the mixtures. Physiologically based pharmacokinetic modeling was used for BTEX. In most cases, a target-organ toxicity dose modification of the hazard index approach is recommended for conducting exposure-based assessments of noncancer health hazards.     

Soybean production and conversion of tropical forest in the Brazilian Amazon: the case of Vilhena, Rondônia

The recent rise in Brazilian soybean production has generated concern among the environmental community and some authors that natural tropical environments of the Amazon Basin are being converted to soybean fields. Proponents of soybean production counter that soybeans represent a viable agricultural commodity for the region; environmental concern is unwarranted, because new soybean fields are replacing already deforested or otherwise transformed lands. Both arguments have been made without comprehensive study and measure of land-use/land-cover (LULC) in areas undergoing expansion of soybean production. This case study, conducted in the municipality of Vilhena, Rond?nia, Brazil, in the southwestern Amazon Basin, uses remote sensing to evaluate the LULC accompanying this municipality's large growth in soybean production from 1996 to 2001. Forests are being converted for soybean production, but most of the production increase appears attributable to slight expansion of already existing fields, conversion of already deforested land, and higher yields.     

Variables affecting emissions of PCDD/Fs from uncontrolled combustion of household waste in barrels

The uncontrolled burning of household waste in barrels has recently been implicated as a major source of airborne emissions of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs). A detailed, systematic study to understand the variables affecting emissions of PCDD/Fs from burn barrels was performed. The waste composition, fullness of the barrel, and the combustion conditions within the barrel all contribute significantly to determining the emissions of PCDD/Fs from burn barrels. The study found no statistically significant effect on emissions from the Cl content of waste except at high levels, which are not representative of typical household waste. At these elevated Cl concentrations, the impact of Cl on PCDD/F emissions was found to be independent of the form of the Cl (inorganic or organic). For typical burn conditions, most of the PCDD/F emissions appear to be associated with the later stages of the burn when the waste is smoldering. Polychlorinated biphenyls (PCBs) were also measured for a subset of the tests. For the nominal waste composition, the average emissions were 76.8 ng toxic equivalency units (TEQ)WHO98/kg of waste combusted, which suggests that uncontrolled burning of household waste could be a major source of airborne PCDD/Fs in the United States.     

Radiocarbon content of synthetic and natural semi-volatile halogenated organic compounds

Some halogenated organic compounds, such as polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polybrominated diphenyl ethers (PBDEs), have been suggested to have natural sources but separating these compounds from their commercially synthesized counterparts is difficult. Molecular-level 14C analysis may be beneficial since most synthetic compounds are manufactured from petrochemicals (14C-free) and natural compounds should have "modern" or "contemporary" 14C levels. As a baseline study, we measured, for the first time, the 14C abundance in commercial PCB and PBDE mixtures, a number of organochlorine pesticides, as well as one natural product 2-(3',5'-dibromo-2'-methoxyphenoxy)-3,5-dibromoanisole. The latter compound was isolated from a marine sponge and is similar in structure to a PBDE. All of the synthetic compounds were 14C-free except for the pesticide toxaphene. which had a modern 14C abundance, as did the brominated natural compound. The result for toxaphene was not surprising since it was commercially synthesized by the chlorination of camphene derived from pine trees. These results suggest that measuring the 14C content of halogenated organic compounds may be quite useful in establishing whether organic compounds encountered in the environment have natural or synthetic origins (or both) provided that any synthetic counterparts derive from petrochemical feedstock.