Analyzing the Impacts of Off-Road Vehicle (ORV) Trails on Watershed Processes in Wrangell-St. Elias National Park and Preserve,Alaska

Trails created by off-road vehicles (ORV) in boreal lowlands are known to cause local impacts, such as denuded vegetation, soil erosion, and permafrost thaw, but impacts on stream and watershed processes are less certain. In Wrangell-St. Elias National Park and Preserve (WRST), Alaska, ORV trails have caused local resource damage in intermountain lowlands with permafrost soils and abundant wetlands and there is a need to know whether these impacts are more extensive. Comparison of aerial photography from 1957, 1981, and 2004 coupled with ground surveys in 2009 reveal an increase in trail length and number and show an upslope expansion of a trail system around points of stream channel initiation. We hypothesized that these impacts could also cause premature initiation and headward expansion of channels because of lowered soil resistance and greater runoff accumulation as trails migrate upslope. Soil monitoring showed earlier and deeper thaw of the active layer in and adjacent to trails compared to reference sites. Several rainfall-runoff events during the summer of 2009 showed increased and sustained flow accumulation below trail crossings and channel shear forces sufficient to cause headward erosion of silt and peat soils. These observations of trail evolution relative to stream and wetland crossings together with process studies suggest that ORV trails are altering watershed processes. These changes in watershed processes appear to result in increasing drainage density and may also alter downstream flow regimes, water quality, and aquatic habitat. Addressing local land-use disturbances in boreal and arctic parklands with permafrost soils, such as WRST, where responses to climate change may be causing concurrent shifts in watershed processes, represents an important challenge facing resource managers.     

Nanoscale zero-valent iron (nZVI): aspects of the core-shell structure and reactions with inorganic species in water

Aspects of the core-shell model of nanoscale zero-valent iron (nZVI) and their environmental implications were examined in this work. The structure and elemental distribution of nZVI were characterized by X-ray energy-dispersive spectroscopy (XEDS) with nanometer-scale spatial resolution in an aberration-corrected scanning transmission electron microscope (STEM). The analysis provides unequivocal evidence of a layered structure of nZVI consisting of a metallic iron core encapsulated by a thin amorphous oxide shell. Three aqueous environmental contaminants, namely Hg(II), Zn(II) and hydrogen sulfide, were studied to probe the reactive properties and the surface chemistry of nZVI. High-resolution X-ray photoelectron spectroscopy (HR-XPS) analysis of the reacted particles indicated that Hg(II) was sequestrated via chemical reduction to elemental mercury. On the other hand, Zn(II) removal was achieved via sorption to the iron oxide shell followed by zinc hydroxide precipitation. Hydrogen sulfide was immobilized on the nZVI surface as disulfide (S(2)(2-)) and monosulfide (S(2-)) species. Their relative abundance in the final products suggests that the retention of hydrogen sulfide occurs via reactions with the oxide shell to form iron sulfide (FeS) and subsequent conversion to iron disulfide (FeS(2)). The results presented herein highlight the multiple reactive pathways permissible with nZVI owing to its two functional constituents. The core-shell structure imparts nZVI with manifold functional properties previously unexamined and grants the material with potentially new applications.     

Physical and Thermal Analysis of the Degradation of Poly(3-Hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-Hydroxybutyrate) Coated Paper in a Constructed Soil Medium

The degradation of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-co-4HB)) coated brown Kraft paper and its components in a constructed soil environment was investigated. Soil burial tests were carried out over 8 weeks. Weight loss measurements, photographic analysis, environmental scanning electron microscopy (ESEM), dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) were conducted to assess the physical, structural, mechanical and thermal behavior before and after the soil burial test. Paper showed the highest physical degradation and weight loss. With respect to the control samples, the stiffness of the partially degraded samples decreased. The overall crystallinity of the biopolymer and the coated paper was affected significantly by burial. The pure biopolymer’s weight loss was substantially enhanced when coated on paper. This result reveals a possible increased microbial population in the coated paper relative to the pure biopolymer.     

Hemolysis,Fish Mortality,and LC-ESI-MS of Cultured Crude and Fractionated Golden Alga (Prymnesium parvum)1

Schug, Kevin A., Theodore R. Skingel, Sandra E. Spencer, Carlos A. Serrano, Cuong Q. Le, Christopher A. Schug, Theodore W. Valenti, Jr., Bryan W. Brooks, Laura D. Mydlarz, and James P. Grover, 2010. Hemolysis, Fish Mortality, and LC-ESI-MS of Cultured Crude and Fractionated Golden Alga (Prymnesium parvum). Journal of the American Water Resources Association (JAWRA) 46(1):33-44. DOI: 10.1111/j.1752-1688.2009.00389.x Abstract: Erythrocyte lysis and fish mortality assays, in combination with high performance liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS) analysis, were investigated for bioassay-guided fractionation of cultured golden alga (Prymnesium parvum). Intracellular constituents from isolated cell pellets and extracellular supernatant growth medium were fractionated by a variety of common separation modes, including reversed phase and normal phase solid phase extraction step fractionation procedures. For reversed phase fractionation of extracellular growth medium, one fraction was obtained that displayed hemolytic activity and adversely affected fish survival. Effective dose concentrations for this sample were similar in both assays and the LC-ESI-MS analysis of the fraction showed a number of mass spectral signals which were distinct to this fraction. Fractions obtained from separation of an ethanol extract of the lyophilized cell pellet provided one sample that was highly hemolytic, but not toxic to fish. Discrepancies such as this, along with notable fish behavioral responses from other nonhemolytic cell pellet fractions, problems with the use of unbonded silica gel for fractionation, and misleading mass spectral signatures are interesting in the context of our current understanding of P. parvum toxicity and remain to be investigated further. This work provides an account of ongoing research aimed toward comprehensive elucidation of toxic constituents produced by golden alga for the purpose of providing a better understanding and means to potentially remediate the ecological impact of this harmful bloom organism.     

Point-of-use water disinfection using UV light-emitting diodes to reduce bacterial contamination

The treatment process described in this research explores the impact of exposing water samples containing fecal coliforms to the radiation produced by single ultraviolet (UV) light-emitting diodes (LEDs) operating at 265 nm. UV LEDs are long lasting, compact in size and produce more efficient light output than traditional mercury-vapour bulbs, making them ideal for application in point-of-use disinfection systems, such as in remote areas. In this study, contaminated water samples containing either a pure culture of Escherichia coli or tertiary effluent from the City of Regina Wastewater Treatment Plant were used to study the application and efficiency of using UV LEDs for water disinfection. The results indicate that bacterial inactivation was achieved in a time-dependent manner, with 1- and 2.5-log E. coli reductions in water following 20 and 50 min of UV LED exposure, respectively. Ultraviolet radiation was less effective in reducing coliform bacteria in wastewater samples due to the elevated turbidity levels. Further work remains to be completed to optimize the application of UV LEDs for point-of-use disinfection systems; however, the results from this study support that bacterial inactivation using UV LEDs is possible, meriting further future technological development of the LEDs.     

Nickel Speciation of Residual Oil Fly Ash and Ambient Particulate Matter Using X-ray Absorption Spectroscopy

ABSTRACT

The chemical speciation of Ni in fly ash produced from ~0.85 wt % S residual (no. 6 fuel) oils in laboratory (7 kW)- and utility (400 MW)-scale combustion systems was investigated using X-ray absorption fine structure (XAFS) spectroscopy, X-ray diffraction (XRD), and acetate extraction [1 M NaOAc-0.5 M HOAc (pH 5) at 25 °C]-anodic stripping voltammetry (ASV). XAFS was also used to determine the Ni speciation of ambient particulate matter (PM) sampled near the 400-MW system. Based on XAFS analyses of bulk fly ash and their corresponding acetate extraction residue, it is estimated that >99% of the total Ni (0.38 wt %) in the experimentally produced fly ash occurs as NiSO₄-xH₂O, whereas >95% of the total Ni (1.70 and 2.25 wt %) in two fly ash samples from the 400-MW system occurs as NiSO₄-xH₂O and Ni-bearing spinel, possibly NiFe₂O₄. Spinel was also detected using XRD. Acetate extracts most of the NiSO₄-xH₂O and concentrates insoluble NiFe₂O₄ in extraction residue. Similar to fly ash, ambient PM contains NiSO₄-xH₂O and NiFe₂O₄;

however, the proportion of NiSO₄-xH₂O relative to NiFe₂O₄ is much greater in the PM. Results from this and previous investigations indicate that residual oil ash produced in the 7-kW combustion system lack insoluble Ni (e.g., NiFe₂O₄) but are enriched in soluble NiSO₄-xH₂O relative to fly ash from utility-scale systems. This difference in Ni speciation is most likely related to the lack of additive [e.g., Mg(OH)₂] injection and residence time in the 7-kW combustion system.     

The Energy for Growing and Maintaining Cities

Herein we develop a means to differentiate between the energy required to expand and the energy required to maintain the economies of cities. A nonlinear model is tested against historical data for two cities, Hong Kong and Singapore. A robust fit is obtained for Hong Kong, with energy for maintenance close to that for growth, while Singapore, with a weaker fit, is growth dominated. The findings suggest that decreases in either of the per unit maintenance or growth demands can simultaneously cause gross domestic product (GDP) and total energy use to increase. Furthermore, increasing maintenance demands can significantly limit growth in energy demand and GDP. Thus, the low maintenance demands for Hong Kong, and especially Singapore, imply that, all other things being equal, GDP and energy use of these cities will continue to grow, though Singapore’s higher energy use for growth means it will require more energy than Hong Kong.     

Changes in character of organics in the receiving environment of effluent from a sulphite pulp mill

Purpose

The characteristics of organics in sulphite pulp mill effluent and in the receiving environment of effluent discharge were investigated to assess the basis for the persistence or attenuation of colour.

Methods

Characterization of organics was conducted through determination of SUVA, specific colour, and molecular weight distribution of organics using high performance size exclusion chromatography and by solid-state ¹³?C cross polarization (CP) NMR. The characteristics of organics from mill wastewater before and after secondary aerobic treatment, followed by lime treatment and from the receiving environment, an enclosed brackish lake were compared. Changes in the character of organics in lake water over a period of 14?years were studied in the context of changes in mill processing and climate impacts.

Results

High colour in mill effluent and in receiving waters correlated with high SUVA and specific colour levels, high molecular weight range and aromatic content. Conversely, lake waters with low colour had UV absorbing compounds of much lower molecular weight range and low relative abundance of aromatic compounds. Attenuation of colour and changes in the character of organics in the receiving environment coincided with increased concentrations of metal cations.

Conclusions

These increased concentrations appear to be due to the effects of climate change, lake management and their presence in mill effluent, with subsequent discharge to the lake. Attenuation of colour was found to be predominantly through removal of high molecular weight aromatic compounds where the removal processes could be through adsorption and co-precipitation with divalent metals, as well as through dilution processes.     

Bioaccessibility of arsenic in various types of rice in an in vitro gastrointestinal fluid system

Rice can be a major contributor to dietary arsenic exposure because of the relatively high total arsenic concentration compared to other grains, especially for people whose main staple is rice. This study employed in vitro gastrointestinal fluid digestion to determine bioaccessible or gastrointestinal fluid extractable arsenic concentration in rice. Thirty-one rice samples, of which 60 % were grown in the United States, were purchased from food stores in New York City. Total arsenic concentrations in these samples ranged from 0.090 ± 0.004 to 0.85 ± 0.03 mg/kg with a mean value of 0.275 ± 0.161 mg/kg (n = 31). Rice samples with relatively high total arsenic (>0.20 mg/kg, n = 18) were treated by in vitro artificial gastrointestinal fluid digestion, and the extractable arsenic ranged from 53 % to 102 %. The bioaccessibility of arsenic in rice decreases in the general order of extra long grain, long grain, long grain parboiled, to brown rices.     

Metrics for integrating sustainability evaluations into remediation projects

The US Sustainable Remediation Forum (SURF) created a compilation of metrics (Metrics Toolbox) in response to a need for a broad set of metrics that could be used to assess and monitor the effectiveness of remedies in achieving sustainability goals. Metrics are the key impacts, outcomes, or burdens that are to be assessed or balanced to determine the influences and impacts of a remedial action. Metrics can reflect any of the three aspects of sustainability (i.e., environmental, social, or economic) or a combination of these aspects. Regardless, metrics represent the most critical sustainable outcomes from the perspective of the key stakeholders. The Metrics Toolbox is hosted online at www.sustainableremediation.org/library/guidance‐tools‐and‐other‐resources . By selecting metrics from the Metrics Toolbox as a starting point and considering a potentially wider suite of metrics in remedial program decisions, appropriate assessments can be made. Qualitative and quantitative metrics are tabulated for each remedial phase: remedial investigation, remedy selection, remedial design, remedial construction, operation and maintenance, and closure. Attributes for each metric are described so that remediation practitioners and key stakeholders can view the universe of metrics available and select the most relevant, site‐specific metrics for a particular site. For this reason, SURF recommends that remediation practitioners consider the metrics compiled in the Metrics Toolbox as a companion to the sustainable remediation framework published elsewhere in this journal and other sustainability evaluations. © 2011 Wiley Periodicals, Inc.