Multiresidue method for high-performance liquid chromatography determination of carbamate pesticides residues in tea samples

A multiresidue method was developed to determine 19 carbamate pesticides in tea samples. Optimizations of different parameters, such as the type of extraction solvents, clean-up cartridges, and elution solvents were carried out. The developed method used acetonitrile as extraction solvent, amino cartridge for adsorbents and acetone-n-hexane as the eluting solution. Nineteen carbamate residues were then analyzed by high-pressure liquid chromatography (HPLC) with fluorescence detector. The present results showed good linearity by correlation coefficients of more than 0.9999 for all analyses. Limits of detection and quantification varied from 0.0005–0.023 mg L^{? 1}, 0.008–0.077 mg L^{? 1}, respectively. Recoveries of sixteen carbamate pesticides ranged from 65% to 135% at the spiked level of 0.5, 1.0 and 2.0 mg L^{? 1}. The relative standard deviations were lower than 20% and coefficient of variations were lower than 15%. The results indicate that the proposed method provides an effective multi and trace level screening determination of carbamate pesticides residues for tea samples.     

Persistence of the herbicide butachlor in soil after repeated applications and its effects on soil microbial functional diversity

Effects of repeated applications of the herbicide butachlor (N-(butoxymethyl)-2-chloro -N-2′,6′-dimethyl acetanilide) in soil on its persistence and soil microbial functional diversity were investigated under laboratory conditions. The degradation half-lives of butachlor at the recommended dosage in soil were calculated to be 12.5, 4.5, and 3.2 days for the first, second, and third applications, respectively. Throughout this study, no significant inhibition of the Shannon-Wiener index H′ was observed. However, the Simpson index 1/D and McIntosh index U were significantly reduced (P ≤ 0.05) during the initial 3 days after the first application of butachlor, and thereafter gradually recovered to a similar level to that of the control soil. A similar variation but faster recovery in 1/D and U was observed after the second and third Butachlor applications. Therefore, repeated applications of butachlor led to more rapid degradation of the herbicide, and more rapid recovery of soil microorganisms. It is concluded that repeated butachlor applications in soil had a temporary or short-term inhibitory effect on soil microbial communities.     

复合光催化材料Ag-AgCl/石墨烯的制备及性能

以原位化学沉淀;光还原法制备了Ag-AgCl/石墨烯复合光催化材料。以罗丹明B为模型降解物,研究了其可见光催化性能。实验结果表明：石墨烯的引入使Ag-AgCl/石墨烯催化剂催化活性提高;当初始罗丹明B质量浓度为5 mg/L时,可见光照射60 min后罗丹明B的降解率可达99%;降解率随初始罗丹明B质量浓度的增加而减小。Ag-AgCl/石墨烯具有很高的可见光催化活性和稳定性。     

Decomposition of NO in automobile exhaust by plasma–photocatalysis synergy

The combination of plasma discharge and TiO₂ photocatalysis exhibits high performances in the removal of nitrogen monoxide (NO). This article is aimed at elucidating the relationships between NO decomposition efficiency and various experimental parameters, including voltages, humidity and temperature. The experimental results indicate that the efficiency of NO removal by synergic plasma-catalyst coupling is significantly higher than plasma only or photocatalyst only systems. Moreover, the NO removal efficiency improves with the increase of applied voltage. Meanwhile, a higher humidity results in a reduced number of electron–hole pairs at the surface of TiO₂ photocatalyst, leading to lower synergic purification efficiencies. Finally, the efficiency of NO removal is raised with the increase of temperature due to the fact that the adsorption of NO and water by nano-TiO₂ is affected by environmental temperature.     

Source attribution for mercury deposition in the contiguous United States: regional difference and seasonal variation

Quantifying the contribution of emission sources responsible for mercury deposition in specific receptor regions helps develop emission control strategies that alleviate the impact on ecosystem and human health. In light of the maximum available control technology (MACT) rules proposed by U.S. Environmental Protection Agency (EPA) and the ongoing intergovernmental negotiation coordinated by United Nations Environmental Programme (UNEP) for mercury, the Community Multiscale Air Quality Modeling System (CMAQ-Hg) was applied to estimate the source contribution in six subregions of the contiguous United States (CONUS). The considered source categories include electric generating units (EGU), iron and steel industry (IRST), other industrial point sources excluding EGU and IRST (OIPM), the remaining anthropogenic sources (RA), natural processes (NAT), and out-of-boundary transport (BC). It is found that, on an annual basis, dry deposition accounts for two-thirds of total annual deposition in CONUS (474 Mg yr(-1)), mainly contributed by reactive gaseous mercury (about 60% of total deposition). The contribution from large point sources can be as high as 75% near the emission sources (< 100 km), indicating that emission reduction may result in direct deposition decrease near the source locations. Out-of-boundary transport contributes from 68% (Northeast) to 91% (West Central) of total deposition. Excluding the contribution from out-of boundary transport, EGU contributes to about 50% of deposition in the Northeast, Southeast, and East Central regions, whereas emissions from natural processes are more important in the Pacific and West Central regions (contributing up to 40% of deposition). This suggests that the implementation of the new EPA MACT standards will significantly benefit only these three regions. Emission speciation is a key factor for local deposition. The source contribution exhibits strong seasonal variation. Deposition is greater in warm seasons due to stronger Hg0 oxidation. However, the contribution from anthropogenic sources is smaller in warm seasons because of larger emissions from natural processes and stronger vertical mixing that facilitates transport.     

Effects of dissolved inorganic carbon and nutrient levels on carbon fixation and properties of Thermosynechococcus sp. in a continuous system

The concept of CO₂ chemo-absorption by sodium hydroxide in a wet scrubber followed by microalgae cultivation was used as a means to reduce the major greenhouse gas. A thermophilic and alkaline tolerable cyanobacterium named Thermosynechococcus CL-1 (TCL-1) was cultivated in continuous system, with a carbonate-bicarbonate buffer as carbon source. The effects of dissolved inorganic carbon (DIC_in) and nutrient levels in influent on cell mass productivity, DIC removal efficiency, and alkaline solution regeneration by TCL-1 were investigated. The results show the highest cell mass productivity reaches 1.7 g L⁻¹ d⁻¹ under the highest DIC and nutrients level. Conversely, the best regeneration of alkaline solution proceeds from pH 9.5 to 11.3 under the lowest level. In addition, the highest ΔDIC (DIC consumption) and DIC removal efficiency are 42 mM and 43% at 113.2 and 57 mM DIC_in, respectively.     

Renewable Resource-Based Composites of Acorn Powder and Polylactide Bio-Plastic: Preparation and Properties Evaluation

Renewable resource-based composites were prepared with acorn powder and Thermoplastic resin poly(lactic acid) (PLA) by twin-screw extrusion followed by injection molding processing or hot-compression molding processing. The study of the composites microstructure showed poor adhesion between acorn powder and PLA matrix. The hygroscopicity, mechanical properties and melt flow property of composites were promising even though the composites had a 70 wt% content of acorn powder. Silane coupling agent, 4,4′-Methylenebis (phenyl isocyanate) and PLA grafted with maleic anhydride did not show obvious effect on mechanical properties of composites. The impact resistance strength of reinforced composites with steel fiber webs were improved greatly in comparison with those having no steel fiber webs. Thermal properties results of DSC and DMA showed that the presence of acorn powder significantly affected the crystallinity, crystallization temperature (T_c), glass transition temperature (T_g) and melting temperature (T_m) of PLA matrix. The study results proved that composites had superior mechanical properties, enough to partially replace the conventional thermoplastic plastics.     

Unusual Salinity Conditions in the Yangtze Estuary in 2006: Impacts of an Extreme Drought or of the Three Gorges Dam?

During the extreme dry year of 2006, abnormal salinity conditions in the Changjiang Estuary of the Yangtze River occurred in partial coincidence with the second impoundment phase of the TGD (Three Gorges Dam). Analysis of discharge observations in the upper reaches of the estuary and of salinity observations in the estuary as a whole reveals that in 2006 salinity was over 100 mg/l during 275 days, over 250 mg/l during 75 days and over 400 mg/l during 48 days. It is well known that this is due to extreme low discharges from the upper catchment area into the estuary. Moreover, large amounts of water consumed along the lower reaches of the Yangtze River can also aggravate the low discharges that lead to stronger saltwater intrusion in the estuary. Of the 75 days that salinity was over 250 mg/l, the low discharge was decreased further by 10 to 20% due to water consumption. The additional impact of the impoundment phase of the TGD (lasting 37 days in autumn) was noticeable only during 7 days in 2006. During that period, the relative contributions of the TGD and the water consumption in the lower reaches of the Yangtze River amounted to 70 and 30%, respectively. It may be concluded that the impact of the second impoundment phase of the TGD on salinity intrusion in the estuary was modest, while the extreme drought of 2006 was the dominant cause.     

Tissue bioaccumulation patterns, xenobiotic biotransformation and steroid hormone levels in Atlantic salmon (Salmo salar) fed a diet containing perfluoroactane sulfonic or perfluorooctane carboxylic acids

In the present study, groups of juvenile Atlantic salmon (Salmo salar) were fed gelatine capsules containing fish-food spiked with PFOA or PFOS (0.2 mg kg⁻¹ fish) and solvent (methanol). The capsules were given at days 0, 3 and 6. Blood, liver and whole kidney samples were collected prior to exposure (no solvent control), and at days 2, 5, 8 and 14 after exposure (Note: that day 14 after exposure is equal to 7 d recovery period). We report on the differences in the tissue bioaccumulation patterns of PFOS and PFOA, in addition to tissue and compound differences in modulation pattern of biotransformation enzyme genes. We observed that the level of PFOS and PFOA increased in the blood, liver and kidney during the exposure period. Different PFOS and PFOA bioaccumulation patterns were observed in the kidney and liver during exposure- and after the recovery periods. Particularly, after the recovery period, PFOA levels in the kidney and liver tissues were almost at the control level. On the contrary, PFOS maintained an increase with tissue-specific differences, showing a higher bioaccumulation potential (also in the blood), compared with PFOA. While PFOS and PFOA produced an apparent time-dependent increase in kidney CYP3A, CYP1A1 and GST expression, similar effects were only temporary in the liver, significantly increasing at sampling day 2. PFOA and PFOS exposure resulted in significant decreases in plasma estrone, testosterone and cortisol levels at sampling day 2, and their effects differed with 17α-methyltestostrerone showing significant decrease by PFOA (also for cholesterol) and increase by PFOS. PFOA significantly increased estrone and testosterone, and no effects were observed for cortisol, 17α-methyltestosterone and cholesterol at sampling day 5. Overall, the changes in plasma steroid hormone levels parallel changes in CYP3A mRNA levels. Given that there are no known studies that have demonstrated such tissue differences in bioaccumulation patterns with associated differences in toxicological responses in any fish species or lower vertebrate, the present findings provide some potential insights and basis for a better understanding of the possible mechanisms of PFCs toxicity that need to be studied in more detail.     

Synthesis of core-shell magnetic molecular imprinted polymer by the surface RAFT polymerization for the fast and selective removal of endocrine disrupting chemicals from aqueous solutions

In this study, we present a general protocol for the making of surface-imprinted core-shell magnetic beads via reversible addition-fragmentation chain transfer (RAFT) polymerization using RAFT agent functionalized iron oxide nanoparticles as the chain transfer agent. The resulting composites were characterized by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) analysis, thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The surface-imprinted magnetic beads were demonstrated with a homogeneous polymer films (thickness of about 22 nm), spherical shape, and exhibited magnetic property (Ms = 0.41 mA m² g⁻¹) and thermal stability. Rebinding experiments were carried out to determine the specific binding capacity and selective recognition. The as-synthesized surface-imprinted core-shell magnetic beads showed outstanding affinity and selectivity towards bisphenol A over structurally related compounds, and easily reach the magnetic separation under an external magnetic field. In addition, the resulting composites reusability without obviously deterioration in performance was demonstrated at least five repeated cycles.