氧化亚铁硫杆菌对亚铁离子的氧化及其动力学研究

采用9K培养基研究了氧化亚铁硫杆菌氧化Fe^2＋过程中,pH和氧化还原电位的变化规律,并对Fe^2＋的氧化过程进行动力学分析,确定了其反应级数及反应速率常数。结果表明,（1）在温度为30℃,摇床转速为150r／min的条件下,氧化亚铁硫杆菌的最佳接种量为10．0％;（2）Fe^2＋初始质量浓度在11．39～21．72g／L时,随着浓度的增大,Fe^2＋达到100％转化率需要的时间增加;（3）氧化亚铁硫杆菌对Fe^2＋的氧化可近似看作一级反应,反应速率常数为0．0527～0．0788h。     

Direct degradation of methylene blue by unactivated peroxymonosulfate: reaction parameters,kinetics, and mechanism

Environmental Science and Pollution Research - Advanced oxidation processes (AOPs) are efficient methods for water purification. However, there are few studies on using peroxymonosulfate (PMS) to...     

Influence of different inoculation densities of black soldier fly larvae (Hermetia illucens) on heavy metal immobilization in swine manure

The disposal of organic waste by the biocomposting of black soldier fly larvae (BSFL) has drawn broad attention. However, the discrepancies in heavy metal immobilization between BSFL biocomposting with different inoculation densities and aerobic composting need to be further researched. In this study, BSFL with inoculation densities of 0.08%, 0.24% and 0.40% was added to swine manure to investigate its influence on heavy metal bioaccumulation and bioavailability. The physicochemical properties, BSFL growth performance and amino acid contents were measured. The results showed that the germination index, total prepupal yield and bioavailable fraction removal rate (%) of Cr and Pb at an inoculation density of 0.40% of BSFL were the highest among all of the BSFL biocomposting groups. Although the bioaccumulation factor and heavy metal (Cd, Cr, Cu and Zn) concentrations of the BSFL body from swine manure with inoculation densities of 0.24% and 0.40% of BSFL were similar, the BSFL inoculation density of 0.40% had the best absorption effect on these heavy metals in terms of total prepupal yield. Therefore, this study provides a basis for exploring the optimal inoculation density of BSFL biocomposting to reduce the harmful effects of heavy metals in swine manure.

     

Increasing collaboration between China and India in the environmental sciences to foster global sustainability

As the two largest countries by population, China and India have pervasive effects on the ecosphere. Because of their human population size and long international boundary, they share biodiversity and the threats to it, as well as crops, pests and diseases. We ranked the two countries on a variety of environmental challenges and solutions, illustrating quantitatively their environmental footprint and the parallels between them regarding the threats to their human populations and biodiversity. Yet we show that China and India continue to have few co-authorships in environmental publications, even as their major funding for scientific research has expanded. An agenda for collaboration between China and India can start with the shared Himalaya, linking the countries’ scientists and institutions. A broader agenda can then be framed around environmental challenges that have regional patterns. Coordinated and collaborative research has the potential to improve the two countries’ environmental performance, with implications for global sustainability.     

Knowledge spillovers and subsequent innovation in green energy: the role of public R&D

Environmental Science and Pollution Research -     

Long-term study of heavy metal pollution in the northern Hangzhou Bay of China: temporal and spatial distribution,contamination evaluation,and potential ecological risk

Environmental Science and Pollution Research - Coastal ecosystem is vulnerable to heavy metal contamination. The northern Hangzhou Bay is under intensifying impact of anthropogenic activities. To...     

曝气-絮凝处理垃圾渗滤液研究

通过现场处理 ,对垃圾渗滤液的曝气 -絮凝处理进行了研究。结果表明该方法对渗滤液的色度、COD、总磷去除率达 80 %以上 ,对氨氮去除率达 60 %以上。在此基础上提出了最优综合控制指标     

曝气策略对膜面剪切力的影响机制及其优化

曝气冲刷是浸没式MBR工艺不同于常规活性污泥法工艺的关键特征,然而现行规范的曝气系统设计与运行比较粗放,缺乏气泡尺寸模拟优化方法。以可直接观测的工程规模 (500 m³·d⁻¹) 膜生物反应器为研究对象,对穿孔管角度进行了优化研究,并用群体平衡模型(Population Balance Model,PBM)模型模拟污泥混合液不同粘度下的内部气泡分布情况。结果表明：穿孔管角度垂直向下、60°、45°、30°、垂直向上在膜面产生的平均剪切力分别为1.74、1.46、1.19、1.38、1.67 Pa,这表明曝气角度最优为垂直向下。0.3%、0.5%和0.8%浓度的羧甲基纤维素钠(Carboxymethyl cellulose, CMC)下产生的平均剪切力分别是1.51、1.92、2.24 Pa,气泡直径逐渐增大。且气泡尺寸越大、流速越大,分布越均匀。基于0.3%、0.5% CMC的速度实验结果与 PBM模拟结果基本吻合。该研究结果可为MBR技术的工艺优化和系统控制方法提升提供参考。     

Numerical modeling of changes in groundwater storage and nitrate load in the unconfined aquifer near a river receiving reclaimed water

Environmental Science and Pollution Research - Reclaimed water (RW) has been widely used as an alternative water resource to recharge rivers in mega-city Beijing. At the same time, the RW also...     

DSCAM-AS1 promotes cervical carcinoma cell proliferation and invasion via sponging miR-338-3p

Environmental Science and Pollution Research - Deregulated lncRNA DSCAM-AS1 expression was found in several tumors. However, mechanism and functional role of DSCAM-AS1 in cervical carcinoma remain...