Adsorption characteristics of Ni(II) on gamma-type alumina particles and its determination of overall adsorption rate by a differential bed reactor

The adsorption experiment of nickel ion [Ni(II)] on gamma-type alumina by a differential bed reactor in aqueous solutions was investigated to determine the adsorption characteristics and overall adsorption rate. The adsorbed amount increased rapidly with pH from pH 2 to 6 and kept constant over pH 6. The adsorbed amount of Ni(II) increased with temperature from 20 to 50 degrees C. Correlation coefficients (R2) of Langmuir and Freundlich adsorption isotherms were 0.9268 and 0.9489, respectively, and Freundlich isotherm was more suitable for adsorption on gamma-type alumina than Langmuir isotherm.The overall adsorption rate of Ni(II) on gamma-type alumina at pH 6 by a differential bed rector was determined as follows: r = 68.77Ce(1.61) - 17.60qe(0.36). Al(III) ions in solutions were away from the alumina surface during the adsorption of Ni(II) and Al(III) concentration increased with an increasing Ni(II) adsorbed amount on alumina.     

Climatology,Trend Analysis and Prediction of Sandstorms and their Associated Dustfall in China

Based on statistical data about Sand and Dust Storms (SDS) and their associated dustfall, features of temporal and spatialdistribution were studied first in this article. SDS and associateddustfalls occurred most often in northern China, especiallynorthwestern China. However, in the last two years, they have atendency to occur on the central and western parts of the Inner Mongolia Autonomous Region. As a result, Beijing is now among the impact areas, and the Chinese government is paying greaterattention to the matter. The changing trends of SDS and associated dustfalls were subsequently analyzed. Occurrences were seen to be decreasing with the feature of fluctuation duringthe period of 1954–2001, but they have slightly increased since 2000. Also, climate factors related to SDS and associated dustfalls were discussed. Finally, it was recommended that methods to predict SDS in China be further studied in the future.     

Effects of heavy rainfall on the composition of airborne bacterial communities

Wet deposition scavenges particles and particle-associated bacteria from the air column, but the impact of raindrops on various surfaces on Earth causes emission of surface-associated bacteria into the air column. Thus, after rainfall, these two mechanisms are expected to cause changes in airborne bacterial community composition (BCC). In this study, aerosol samples were collected at a suburban site in Seoul, Korea before and after three heavy rainfall events in April, May, and July 2011. BCC was investigated by pyrosequencing the 16S rRNA gene in aerosol samples. Interestingly, the relative abundance of non-spore forming Actinobacteria operational taxonomic units (OTUs) was always higher in post-rain aerosol samples. In particular, the absolute and relative abundances of airborne Propionibacteriaceae always increased after rainfall, whereas those of airborne Firmicutes, including Carnobacteriaceae and Clostridiales, consistently decreased. Marine bacterial sequences, which were temporally important in aerosol samples, also decreased after rainfall events. Further, increases in pathogen-like sequences were often observed in post-rain air samples. Rainfall events seemed to affect airborne BCCs by the combined action of the two mechanisms, with potentially adverse effects on human and plant health.

Open image in new window

     

Degradation of azo dye reactive violet 5 by TiO2 photocatalysis

The photocatalytic degradation of hydrolyzed reactive violet 5 (RV5) using titanium dioxide (TiO₂) was investigated in this study. The effects of various factors including the amount of photocatalyst, RV5 concentration, light intensity, and pH on photocatalytic degradation were evaluated. The photodegradation efficiency was 90% after 20 min of irradiation and reached nearly 100% after 80 min under the condition of pH 4 and temperature of 25°C. The decolorization rate typically followed first-order reaction, and increased markedly with increasing amount of photocatalyst, pH as well as light intensity. The total mineralization, based on total organic carbon (TOC) concentration was 53% after 20 min of UV light exposure and approached nearly 100% after 140 min. The final mineralization product was formylformamide. The photodegradation was faster than the mineralization, indicating that the intermediate products of decolorization were resistant to photodegradation. In this study, we found that toxicity of RV5 significantly decreased after decolorization. Our study suggests that the photocatalytic degradation treatment of RV5 with TiO₂ in wastewater is a simple and fast method.     

A Comparison of Waste Reduction Practices and the New Environmental Paradigm in Four Southern Chinese Areas

On domestic waste recycling, it was found that source separation of domestic waste in mainland China was supported by 85% of the urban population and about 11–13% of the household waste was recovered and sold by the householders for financial gains. It was also found that the lower income group tended to recover a greater portion of waste, indicating that voluntary waste recovery activities in mainland China were carried out largely due to economic reasons. Thus, the Western type of source separation program in which residents are requested to separate recyclables for the community may not be welcomed in mainland China. In Hong Kong, despite the presence of community waste recovery programs, the recovery of domestic waste is only about 6% and is therefore less than those of the mainland Chinese cities surveyed. On the choice of source separation programs, it was found that Hong Kong people ranked familiarity a more important criterion than convenience. Therefore, the collection frequency of recyclables and time and place for setting out recyclables should be as similar to those of normal waste collection as possible to attract high participation in source separation programs.     

Factors controlling groundwater quality in the Yeonjegu District of Busan City,Korea, using the hydrogeochemical processes and fuzzy GIS

The hydrogeochemical processes and fuzzy GIS techniques were used to evaluate the groundwater quality in the Yeonjegu district of Busan Metropolitan City, Korea. The highest concentrations of major ions were mainly related to the local geology. The seawater intrusion into the river water and municipal contaminants were secondary contamination sources of groundwater in the study area. Factor analysis represented the contamination sources of the mineral dissolution of the host rocks and domestic influences. The Gibbs plot exhibited that the major ions were derived from the rock weathering condition. Piper’s trilinear diagram showed that the groundwater quality was classified into five types of CaHCO₃, NaHCO₃, NaCl, CaCl₂, and CaSO₄ types in that order. The ionic relationship and the saturation mineral index of the ions indicated that the evaporation, dissolution, and precipitation processes controlled the groundwater chemistry. The fuzzy GIS map showed that highly contaminated groundwater occurred in the northeastern and the central parts and that the groundwater of medium quality appeared in most parts of the study area. It suggested that the groundwater quality of the study area was influenced by local geology, seawater intrusion, and municipal contaminants. This research clearly demonstrated that the geochemical analyses and fuzzy GIS method were very useful to identify the contaminant sources and the location of good groundwater quality.

     

Modeling effects of moisture content and advection on odor causing vocs volatilization from stored swine manure

Abstract

Two models for evaluating the contents and advection of manure moisture on odor causing volatile organic compounds (VOC‐odor) volatilization from stored swine manure were studied for their ability to predict the volatilization rate (indoor air concentration) and cumulative exposure dose: a MJ‐I model and a MJ‐II model. Both models simulating depletion of source contaminant via volatilization and degradation based on an analytical model adapted from the behavior assessment model of Jury et al. In the MJ‐I model, manure moisture movement was negligible, whereas in the MJ‐II model, time‐dependent indoor air concentrations was a function of constant manure moisture contents and steady‐state moisture advection. Predicted indoor air concentrations and inhaled doses for the study VOC‐odors of p‐cresol, toluene, and p‐xylene varied by up to two to three orders of magnitude depending on the manure moisture conditions. The sensitivity analysis of both models suggests that when manure moisture movement exists, simply MJ‐I model is inherently not sufficient to represent a more generally volatilization process, which can even become stringent as moisture content increases. The conclusion illustrates how one needs to include a wide variety of manure moisture values in order to fully assess the complex volatilization mechanisms that are present in a real situation.     

A Model to Predict the System Performance of an Electrostatic Precipitator for Collecting Polydisperse Particles

Abstract

This paper presents a model for predicting the performance of an electrostatic precipitator (ESP) for collecting polydisperse particles. The particle charge was obtained by modifying Cochet’s charge equation; the particle size distribution was approximated by a lognormal function; and then the statistic method of moments was employed to obtain a set of the first three moment equations. The continuous evolution of the particle size distribution in an ESP is easily taken into account by the first three moment equations. The performance of this model was validated by comparing its predictions with the existing data available in the literature. Effects of the particle size distribution on the ESP performance were examined, and the results indicated that both overall mass and number efficiencies are lower for inlet particles with a larger mass median diameter and a higher geometric standard deviation. The methodology introduced may be applied to develop design criteria and determine optimal operating conditions of an ESP for improving the collection efficiency of the submicron particles.     

Effect of Fe-chelating complexes on a novel M2FC performance with ferric chloride and ferricyanide catholytes

As an effort to better utilize the microbial fuel cell (MFC) technology, we previously proposed an innovative MFC system named M2FC consisting of ferric-based MFC part and ferrous-based fuel cell (FC) part. In this reactor, ferric ion, the catholyte in the MFC part, was efficiently regenerated by the FC part with the generation of additional electricity. When both units were operated separately, the ferric-based MFC part produced approximately 1360 mW m⁻² of power density with FeCl₃ as catholyte and Fe-citrate as anolyte. The ferrous-based FC part with FeCl₃ as catholyte and Fe-EDTA as anolyte displayed the highest power density (1500 mW m⁻²), while that with ferricyanide as catholyte and Fe-noligand as anolyte had the lowest power density (380 mW m⁻²). The types of catholytes and chelating complexes as anolyte were found to play important roles in the reduction of ferric ions and oxidation of ferrous ion. Linear sweep voltammetry results supported that the cathode electrolytes were electrically active and these agreed well with the M2FC reactor performance. These results clearly showed that ligands played critical role in the efficiency and rate for recycling iron ion and thus the M2FC performance.     

Bacteria additives to the changes in gaseous mass transfer from stored swine manure

Abstract

A bacteria additives treatment experiment in assessing the changes in gaseous mass transfer from stored swine manure is presented. The experiment is tested for ammonia, methane, hydrogen sulfide, and carbon dioxide emission data sampled from pilot swine manure columns and analyzed by GC/MS. The result shows that bacteria additives slightly reduce the methane and carbon dioxide releases, while the same additives do not show any effect on the reduction of ammonia. The hydrogen sulfide contents of stored swine manure continued to be low. Gas concentrations emitted from treated and untreated stored swine manure were: 3.76 and 2.2 ppm for methane, 0.35 and 0.11 ppm for ammonia, and 1000 and 470 ppm for carbon dioxide, respectively. A simple model to estimate gas emission rates is also developed from the viewpoint of two‐film resistance theory. The average emission rates calculated from the model for methane, ammonia, and carbon dioxide are respectively: 0.01, 0.0005, and 13.98 g/min from untreated stored manure; while 0.07, 0.096, and 0.55 g/min from treated manure. The emission model also indicates that for most gaseous pollutants of environmental concern, liquid phase transfer coefficient controls the rate of volatile compounds emitted from stored swine manure and gas phase transfer coefficient has insignificant effect in the calculation of overall mass transfer coefficient.