Sulfate removal from waste chemicals by precipitation

Chemical oxidation using Fenton's reagent has proven to be a viable alternative to the oxidative destruction of organic pollutants in mixed waste chemicals, but the sulfate concentration in the treated liquor was still above the acceptable limits for effluent discharge. In this paper, the feasibility of sulfate removal from complex laboratory wastewaters using barium and calcium precipitation was investigated. The process was applied to different wastewater cases (two composite samples generated in different periods) in order to study the effect of the wastewater composition on the sulfate precipitation. The experiments were performed with raw and oxidized wastewater samples, and carried out according to the following steps: (1) evaluate the pH effect upon sulfate precipitation on raw wastewaters at pH range of 2-8; (2) conduct sulfate precipitation experiments on raw and oxidized wastewaters; and (3) characterize the precipitate yielded. At a concentration of 80 g L(-1), barium precipitation achieved a sulfate removal up to 61.4% while calcium precipitation provided over 99% sulfate removal in raw and oxidized wastewaters and for both samples. Calcium precipitation was chosen to be performed after Fenton's oxidation; hence this process configuration favors the production of higher quality precipitates. The results showed that, when dried at 105 degrees C, the precipitate is composed of hemidrate and anhydrous calcium sulfate ( approximately 99.8%) and trace metals ( approximately 0.2%: Fe, Cr, Mn, Co, Ag, Mg, K, Na), what makes it suitable for reuse in innumerous processes.     

Waste materials for activated carbon preparation and its use in aqueous-phase treatment: a review

Commercial activated carbon is a preferred adsorbent for the removal of micropollutants from the aqueous phase; however, its widespread use is restricted due to high associated costs. To decrease treatment costs, attempts have been made to find inexpensive alternative activated carbon (AC) precursors, such as waste materials. Some reviews report the use of waste materials for the preparation of AC; however, these studies are restricted to either type of wastes, preparation procedures, or specific aqueous-phase applications. The present work reviews and evaluates literature dedicated both to the preparation of AC by recycling different types of waste materials and also to its application in various aqueous-phase treatments. It is clear that conventional (from agriculture and wood industry) and non-conventional (from municipal and industrial activities) wastes can be used to prepare AC, that can be applied in various aqueous treatment processes, namely to remove organic pollutants, dyes, volatile organic compounds, and heavy metals. Moreover, high surface areas can be obtained using either physical or chemical activation; however, combined treatments might enhance the surface properties of the adsorbent, therefore increasing its adsorption capacity. It is evident from the revision made that AC prepared from both conventional and non-conventional wastes might effectively compete with the commercial ones. This happens mostly when the activation procedures are optimized considering both the raw material used to produce the carbons and the contaminants to be removed.     

An Assessment of Oil Pollution in the Coastal Zone of Patagonia,Argentina

The Patagonian coast is considered a relatively pristine environment. However, studies conducted along coastal Patagonia have showed hydrocarbon pollution mostly concentrated at ports that have fishing, oil loading, general merchant, and/or tourist activities. A high value of total aliphatic hydrocarbons (TAH) was found at the Rawson fishing port (741 μg/g dw). In other ports with and without petroleum-related activities, hydrocarbon values were approximately 100 μg/g dw. The highest values for TAH and total aromatic hydrocarbons (TArH) were found in Faro Aristizábal, north of San Jorge gulf (1304 and 737 μg/g dw, respectively). This is very likely the result of petroleum-related activities at the Comodoro Rivadavia, Caleta Cordova, and Caleta Olivia ports located within this gulf. In other coastal areas away from potential anthropogenic sources, hydrocarbon values were less than 2 and 3 μg/g dw for TAH and TArH, respectively. This review of published and unpublished information suggests that ports are important oil pollution sources in the Patagonian coast. More detailed studies are needed to evaluate the area affected by port activities, to understand the mechanisms of hydrocarbon distribution in surrounding environments, and to assess bioaccumulation in marine organisms. Despite that some regulations exist to control oil pollution derived from port and docked vessel activities, new and stricter management guidelines should be implemented.     

Volcano-related materials in concretes: a comprehensive review

Massive volcano-related materials (VRMs) erupted from volcanoes bring the impacts to natural environment and humanity health worldwide, which include generally volcanic ash (VA), volcanic pumice (VP), volcanic tuff (VT), etc. Considering the pozzolanic activities and mechanical characters of these materials, civil engineers propose to use them in low carbon/cement and environment-friendly concrete industries as supplementary cementitious materials (SCMs) or artificial/natural aggregates. The utilization of VRMs in concretes has attracted increasing and pressing attentions from research community. Through a literature review, this paper presents comprehensively the properties of VRMs and VRM concretes (VRMCs), including the physical and chemical properties of raw VRMs and VRMCs, and the fresh, microstructural and mechanical properties of VRMCs. Besides, considering environmental impacts and the development of long-term properties, the durability and stability properties of VRMCs also are summarized in this paper. The former focuses on the resistance properties of VRMCs when subjected to aggressive environmental impacts such as chloride, sulfate, seawater, and freezing–thawing. The latter mainly includes the fatigue, creep, heat-insulating, and expansion properties of VRMCs. This study will be helpful to promote the sustainability in concrete industries, protect natural environment, and reduce the impacts of volcano disaster. Based on this review, some main conclusions are discussed and important recommendations regarding future research on the application of VRMs in concrete industries are provided.     

Developing biodiversity indicators on a stakeholders’ opinions basis: the gypsum industry Key Performance Indicators framework

This study aims to establish a common Key Performance Indicators (KPIs) framework for reporting about the gypsum industry biodiversity at the European level. In order to integrate different opinions and to reach a consensus framework, an original participatory process approach has been developed among different stakeholder groups: Eurogypsum, European and regional authorities, university scientists, consulting offices, European and regional associations for the conservation of nature, and the extractive industry. The strategy is developed around four main steps: (1) building of a maximum set of indicators to be submitted to stakeholders based on the literature (Focus Group method); (2) evaluating the consensus about indicators through a policy Delphi survey aiming at the prioritization of indicator classes using the Analytic Hierarchy Process method (AHP) and of individual indicators; (3) testing acceptability and feasibility through analysis of Environmental Impact Assessments (EIAs) and visits to three European quarries; (4) Eurogypsum final decision and communication. The resulting framework contains a set of 11 indicators considered the most suitable for all the stakeholders. Our KPIs respond to European legislation and strategies for biodiversity. The framework aims at improving sustainability in quarries and at helping to manage biodiversity as well as to allow the creation of coherent reporting systems. The final goal is to allow for the definition of the actual biodiversity status of gypsum quarries and allow for enhancing it. The framework is adaptable to the local context of each gypsum quarry.     

Bedload transport and bedforms migration under sand supply limitation

Environmental Fluid Mechanics - Most studies on sediment transport and bedforms migration consider unlimited sediment supply conditions. However, areas where the sediment supply is limited are...     

Freshwater fish diversity hotspots for conservation priorities in the Amazon Basin

Conserving freshwater habitats and their biodiversity in the Amazon Basin is a growing challenge in the face of rapid anthropogenic changes. We used the most comprehensive fish-occurrence database available (2355 valid species; 21,248 sampling points) and 3 ecological criteria (irreplaceability, representativeness, and vulnerability) to identify biodiversity hotspots based on 6 conservation templates (3 proactive, 1 reactive, 1 representative, and 1 balanced) to provide a set of alternative planning solutions for freshwater fish protection in the Amazon Basin. We identified empirically for each template the 17% of sub-basins that should be conserved and performed a prioritization analysis by identifying current and future (2050) threats (i.e., degree of deforestation and habitat fragmentation by dams). Two of our 3 proactive templates had around 65% of their surface covered by protected areas; high levels of irreplaceability (60% of endemics) and representativeness (71% of the Amazonian fish fauna); and low current and future vulnerability. These 2 templates, then, seemed more robust for conservation prioritization. The future of the selected sub-basins in these 2 proactive templates is not immediately threatened by human activities, and these sub-basins host the largest part of Amazonian biodiversity. They could easily be conserved if no additional threats occur between now and 2050.     

Human milk contamination by nine organochlorine pesticide residues (OCPs)

Abstract

Organochlorine pesticides (OCPs) are widely used around the world as insecticides, herbicides, fungicides, nematicides, and rodenticides. Despite banned in Brazil, the usage remains occurring in many countries. The persistence and extreme mobility of OCPs contribute to the contamination of the environment and the human body. The OCPs bioaccumulation in adipose tissue triggers the excretion into human milk during breastfeeding. Hence, the present study determined eighteen OCPs residues in the breast milk of mothers from the Western Region of Bahia State, Brazil. Nine different residue species were found, including beta-Hexachlorocyclohexane (9.24?±?0.00?ng g^?1 fat), delta- Hexachlorocyclohexane (22.15?±?10.48?ng g^?1 fat), Heptachlor (58.08?±?74.13?ng g^?1 fat), Aldrin (142.65?±?50.65?ng g^?1 fat), Dieldrin (774.62?±?472.68?ng g^?1 fat), Endosulfan I (408.44?±?245.51?ng g^?1 fat), Dichloro-diphenyl-dichloro-ethylene (29.17?±?22.42?ng g^?1 fat), Dichloro-diphenyl-trichloro-ethane (28.87?±?0.00?ng g^?1 fat) and Methoxychlor (1699.67?±?797.43?ng g^?1 fat). The Methoxychlor presence in all samples may reveal a recent exposure, while Dieldrin and Endosulfan I analyses can point to distant past exposure.