Factors affecting river health and its assessment over broad geographic ranges: the Western Australian experience

AusRivAS is an Australia-wide program that measures river condition using predictive models to compare the macroinvertebrate families occurring at a river site with those expected if the site were in natural condition. Results of assessment of 685 sites across all major rivers in Western Australia are presented. Most rivers were in relatively natural condition in the northern half of the state where the human population is low and pastoralism is the major land use. In the south, where the human population is higher and agriculture is more intensive, rivers were mostly more disturbed. AusRivAS assessment produced some erroneous results in rivers of the south-west cropping zone because of the lack of appropriate reference site groups and biased distribution of sampling sites. Collecting low numbers of animals from many forested streams, because of low stream productivity and samples that were difficult to sort, also affected assessments. Overall, however, AusRivAs assessment identified catchment processes that were inimical to river health. These processes included salinisation, high nutrient and organic loads, erosion and loss of riparian vegetation. River regulation, channel modification and fire were also associated with river degradation. As is the case with other assessment methods, one-off sampling at individual sites using AusRivAS may be misleading. Seasonal drought, in particular, may make it difficult to relate conditions at the time of sampling to longer-term river health. AusRivAS has shown river condition in Western Australia is not markedly different from other parts of Australia which, as a whole, lacks the substantial segments of severely degraded river systems reported in England.     

Pesticide Residues in Bovine Milk from a Predominantly Agricultural State of Haryana, India

One hundred forty seven samples of bovine milk were collected from 14 districts of Haryana, India during December 1998–February 1999 and analysed for the presence of organochlorine pesticide (OCPs) residues. ∑HCH, ∑DDT, ∑endosulfan and aldrin were detected in 100%, 97%, 43% and 12% samples and with mean values of 0.0292, 0.0367, 0.0022 and 0.0036 μg/ml, respectively. Eight percent samples exceeded the maximum residue limit (MRL) of 0.10 mg/kg as recommended by WHO for ∑HCH, 4% samples of 0.05 mg/kg for α-HCH, 5% samples of 0.01 mg/kg for γ-HCH, 26% samples of 0.02 mg/kg for β-HCH as recommended by PFAA and 24% samples of 0.05 mg/kg as recommended by FAO for ∑DDT. Concentrations of β-HCH and p,p′-DDE were more as compared to other isomers and metabolites of HCH and DDT.     

Canopy Spectra and Remote Sensing of Ashe Juniper and Associated Vegetation

A study was conducted in central Texas to determine the potential of using remote sensing technology to distinguish Ashe juniper (Juniperus ashei Buchholz) infestations on rangelands. Plant canopy reflectance measurements showed that Ashe juniper had lower near-infrared reflectance than other associated woody plant species and lower visible reflectance than mixed herbaceous species in spring and summer. Ashe juniper could be distinguished on color-infrared aerial photographs acquired in March, April, June, and August and on QuickBird false color satellite imagery obtained in June, where it had a distinct dark reddish-brown tonal response. Unsupervised classification techniques were used to classify aerial photographic and satellite imagery of study sites. An accuracy assessment performed on a computer classified map of a photographic image showed that Ashe juniper had producer's and user's accuracies of 100% and 92.9%, respectively, whereas an accuracy assessment performed on a classified map of a satellite image of the same site showed that Ashe juniper had producer's and user's accuracies of 94.1% and 88.1%, respectively. Accuracy assessments performed on classified maps of satellite images of two additional study sites showed that Ashe juniper had producer's and user's accuracies that ranged from 87.1% to 96.4%. These results indicate that both color-infrared photography and false color satellite imagery can be used successfully for distinguishing Ashe juniper infestations.     

Organic pollutants in compost and digestate. Part 1. Polychlorinated biphenyls, polycyclic aromatic hydrocarbons and molecular markers

In Europe, 9.3 x 10(6) t(dry weight (dw)) of compost and digestate are produced per year. Most of this is applied to agricultural land, which can lead to considerable inputs of organic pollutants, such as polychlorinated biphenyls (PCB) and polycyclic aromatic hydrocarbons (PAH) to soil. This paper presents an inventory of the pollutant situation in source-separated composts, digestates and presswater in Switzerland by a detailed analysis of over 70 samples. PCB concentrations ( summation PCB 28, 52, 101, 118, 138, 153, 180) were significantly higher in urban (median: 30 microg kg(-1)dw, n = 52) than in rural samples (median: 14 microg kg(-1)dw, n = 16). Together with low concentrations in general, this points to aerial deposition on compost input material as the major contamination pathway. Enantiomeric fractions of atropisometric PCB were close to racemic. Median PAH concentration was 3010 microg kg(-1)dw( summation 15PAH, n = 69), and one quarter of the samples exhibited concentrations above the relevant Swiss guide value for compost (4000 microg kg(-1)dw). The levels were influenced by the treatment process (digestate > compost), the season of input material collection (spring-summer > winter > autumn), the particle size (coarse-grained > fine-grained), and maturity (mature > less mature). The main source of PAH in compost was pyrogenic, probably influenced mainly by liquid fossil fuel combustion and some asphalt abrasion, as suggested by multiple linear regression. This study, together with a companion paper reporting on other organic contaminates including emerging compound classes, provides a starting point for a better risk-benefit estimation of the application of compost and digestate to agricultural soil in Switzerland.     

Nitrogen and metals in two regions in Central Europe: Significant differences in accumulation in mosses due to land use?

The study was conducted to test the hypothesis that the regional variability of nitrogen (N) and metal accumulations in terrestrial ecosystems are due to historical and recent ways of landuse. To this end, two regions of Central Europe were selected for investigation: the Weser-Ems Region (WER) and the Euro Region Nissa (ERN). They were assumed to have land use-specific accumulation profiles. Thus, the metal and N accumulations in both regions were examined by means of geostatistically based comparative moss analysis. The sampling and chemical analysis of mosses were conducted in accordance with the convenient guidelines and methods, respectively. The spatial representativity of the sampling sites was computed by means of a land classification which was calculated for Europe by means of classification trees and GIS-techniques. The differences of deposition loads were tested for statistical significance with regard to time and space. The measurement values corroborated the decline of metal accumulation observed since the beginning of the European Metals in Mosses Surveys in 1990. The metal loads of the mosses in the ERN exceeded those in the WER significantly. The opposite holds true for the N concentrations: those in the WER were significantly higher than those in the ERN. The reduction of emissions from power plants, factories and houses was strongly correlated with the decline of deposition and bioaccumulation of metals. As proved by the European Metals in Mosses Surveys, this tendency is due to successful environmental policies. But no such success could be verified by monitoring the accumulation of N in mosses.     

Water Quality Changes in Chini Lake, Pahang, West Malaysia

A study of the water quality changes of Chini Lake was conducted for 12 months, which began in May 2004 and ended in April 2005. Fifteen sampling stations were selected representing the open water body in the lake. A total of 14 water quality parameters were measured and Malaysian Department of Environment Water Quality Index (DOE-WQI) was calculated and classified according to the Interim National Water Quality Standard, Malaysia (INWQS). The physical and chemical variables were temperature, dissolved oxygen (DO), conductivity, pH, total dissolved solid (TDS), turbidity, chlorophyll-a, biochemical oxygen demand (BOD), chemical oxygen demand (COD), total suspended solid (TSS), ammonia-N, nitrate, phosphate and sulphate. Results show that base on Malaysian WQI, the water in Chini Lake is classified as class II, which is suitable for recreational activities and allows body contact. With respect to the Interim National Water Quality Standard (INWQS), temperature was within the normal range, conductivity, TSS, nitrate, sulphate and TDS are categorized under class I. Parameters for DO, pH, turbidity, BOD, COD and ammonia-N are categorized under class II. Comparison with eutrophic status indicates that chlorophyll-a concentration in the lake was in mesotrophic condition. In general water quality in Chini Lake varied temporally and spatially, and the most affected water quality parameters were TSS, turbidity, chlorophyll-a, sulphate, DO, ammonia-N, pH and conductivity.     

Coastal Flood Risk Analysis Using Landsat-7 ETM+ Imagery and SRTM DEM: A Case Study of Izmir, Turkey

The Intergovernmental Panel on Climate Change (IPCC) reports an acceleration of the global mean sea-level rise (MSLR) in the twentieth century in response to global climate change. If this acceleration remains constant, then some coastal areas are most likely to be inundated by the year 2100. The ability to identify the differential vulnerability of coastlines to future inundation hazards as result of global climate change is necessary for timely actions to be taken. Yildiz et al. (Journal of Mapping, 17, 1-75, 2003) reported that the local MSLR in the city of Izmir rose at a rate of 6.8 +/- 0.9 mm year(-1) between 1984 and 2002. In this study, the spatial distribution of the coastal inundation hazards of Izmir region was determined using not only land-use and land-cover (LULC) types derived from the maximum likelihood classification of Landsat-7 Enhanced Thematic Mapper Plus (ETM+) multi-spectral image set but also the classification of the digital elevation model (DEM) acquired by the shuttle radar topography mission (SRTM). Coastal areas with elevations of 2 and 5 m above mean sea-level vulnerable to inundation were found to cover 2.1 and 3.7% of the study region (6,107 km(2)), respectively. Our findings revealed that Menemen plain along Gediz river, and the settlements of Karsiyaka, Alacati, Aliaga, Candarli and Selcuk are at high risk in order of decreasing vulnerability to permanent and episodic inundation by 2100 under the high MSLR scenarios of 20 to 50 mm year(-1).     

Comparative evaluation of a bioluminescent bacterial assay in terrestrial ecotoxicity testing

Despite the widespread and successful use of luminescence-based bioassays in water testing, their applications to soils and sediments is less proven. In part this is because such bioassays have mainly been carried out in an aqueous-based medium and, as such, favour contaminants that are readily water-soluble. In this study, aqueous solutions and soils contaminated with heavy metals (HM), polar organic contaminants and hydrophobic organic contaminants (HOCs) were tested using a range of luminescence-based bioassays (Vibrio fischeri, Escherichia coli HB101 pUCD607 and Pseudomonas fluorescens 10586r pUCD607). For the first two chemical groups, the assays were highly reproducible when optimised extraction procedures were employed but for HOCs the bioassay response was poor. Quantitative structure-activity relationships (QSARs) obtained from aqueous solutions had a linear response although correlation for the chemicals tested using bacterial bioassays was significantly less sensitive than that of sublethal tests for Tetrahymena pyriformis. Bacterial and Dendrobaena veneta bioassay responses to extracts from HM amended soils showed that a clear relationship between trophic levels could be obtained. There is no doubt that the wide range of bioluminescent-based bioassays offers complementary applications to traditional testing techniques but there is a significant need to justify and optimise the extraction protocol prior to application.     

Waste polyvinylchloride derived pitch as a precursor to develop carbon fibers and activated carbon fibers

Polyvinylchloride (PVC) was successfully recycled through the solvent extraction from waste pipe with an extraction yield of ca. 86%. The extracted PVC was pyrolyzed by a two-stage process (260 and 410 degrees C) to obtain free-chlorine PVC based pitch through an effective removal of chlorine from PVC during the heat-treatment. As-prepared pitch (softening point: 220 degrees C) was spun, stabilized, carbonized into carbon fibers (CFs), and further activated into activated carbon fibers (ACFs) in a flow of CO2. As-prepared CFs show comparable mechanical properties to commercial CFs, whose maximum tensile strength and modulus are 862 MPa and 62 GPa, respectively. The resultant ACFs exhibit a high surface area of 1200 m2/g, narrow pore size distribution and a low oxygen content of 3%. The study provides an effective insight to recycle PVC from waste PVC and develop a carbon precursor for high performance carbon materials such as CFs and ACFs.     

Composition of a Spanish sewage sludge and effects on treated soil and olive trees

The effects of sewage sludge (SL) application on the soil and olive trees (Olea europaea L., cultivar: cornicabra) were studied. The plants were grown in 8.5L pots and subjected to the following treatments: 0, 3.66, 7.32, 14.65, 29.3, 58.6, and 117.2 g SL kg(-1) soil that corresponded, respectively, to 0, 4, 8, 16, 32, 64 and 128 M g ha(-1) dry weight of sewage sludge. The application of SL at the rates 64 and 128 M g ha(-1) produced leaf tip burning and leaf drop after 120 days, although cumulative metal pollutant loading rates was below USEPA and European regulations. This toxicity symptom could be caused by the high sodium levels in the leaves (over 0.19%), which can damage olive tree development. The Na contents of leaves were well correlated with soil Na content (r2: 0.91). In general, SL rates significantly increased the level of Cr, Ni, Cu, Zn, Cd and Pb in soil and plants, but these concentrations were in the normal ranges, except for the Zn concentration, which was over the critical soil content for the rates of 32, 64, 128 Mg ha(-1) but not in the leaves. Results suggested that regulations about the utilization of sewage sludge on agricultural land should consider the limit values for salt, and not only metals, that may be added to soil, in order to minimize the risk of negative effects to plant health.