APPLICATION OF THE BASINS DATABASE AND NPSM MODEL ON A SMALL OHIO WATERSHED1

ABSTRACT: The purpose of this study was to evaluate the Better Assessment Science Integrating Point and Nonpoint Sources (BASINS) watershed management system. BASINS data were used with the NPSM model to predict discharge and sediment concentrations at the outlet of a 103 km² Ohio watershed. It was concluded that the NPSM model should always be calibrated but only a few of the parameters provided with BASINS needed to be calibrated. For a three‐year study period, there was a 2 percent underestimation of discharge using area weighted precipitation values and a 25 percent overestimation using the single station data in BASINS. A comparison of observed and predicted monthly discharge resulted in an r² of 0.86 with area‐weighted precipitation and an r² of 0.74 with the single station data. Calibrating the model to substantially improve sediment predictions was unsuccessful and we concluded that a calibration period of one year was too short. For the three‐year study period, the r² for sediment was 0.36 with a slope of 0.37 and an intercept of 18.8 mg/l. The mean observed and predicted sediment concentrations were 27.1 mg/l and 22.6 mg/l, respectively.     

The first record of a sauropod dinosaur from Antarctica

Sauropoda is one of the most diverse and geographically widespread clades of herbivorous dinosaurs, and until now, their remains have now been recovered from all continental landmasses except Antarctica. We report the first record of a sauropod dinosaur from Antarctica, represented by an incomplete caudal vertebra from the Late Cretaceous of James Ross Island. The size and morphology of the specimen allows its identification as a lithostrotian titanosaur. Our finding indicates that advanced titanosaurs achieved a global distribution at least by the Late Cretaceous.     

Timing matters when assessing dominance and chemical signatures in the paper wasp Polistes dominulus

A recent study (Izzo et al., Behav Ecol Sociobiol 64: 857–864, 2010) reported that cuticular hydrocarbons (CHCs) correlate with fertility, not dominance, in the paper wasp Polistes dominulus thus contradicting the results of recent investigations which concluded that social dominance is the main determinant for CHC signatures in this species. We suggest here that different forms of dominance in the pre-nesting and post-nesting phases caused the apparently contradictory results. Thus the assumption that dominance behaviour in the pre-nesting stage is synonymous with dominance after colony foundation is incorrect. We provide standardised definitions for forms of “dominance” observed in the P. dominulus life cycle to avoid apparent discrepancies in the future among studies dealing with the same topics in different annual stages.     

Estimation of plant protection product application dates for environmental fate modeling based on phenological stages of crops

According to the EU directive 91/414/EEC potential environmental concentrations of pesticides have to be assessed with environmental fate models. For the calculation of pesticide concentrations it is necessary to provide an application date which has to match the specific Biologische Bundesanstalt, Bundesamt, Chemische Industrie (BBCH) stage at which the pesticide shall be applied. If these application dates are not available for a specific stage, crop and country they must be estimated, which adds an additional uncertainty to the predicted concentrations. In the present study, we therefore evaluate to which extent application dates can be derived from phenological data. For this analysis phenological data, converted to BBCH stages, of two field crops provided by the German Weather Service (DWD) were analyzed. We found a linear correlation between BBCH stages and the respective appearance dates, which can be used for interpolation of appearance dates of specific BBCH stages. Remarkably, when comparing BBCH stages from Germany and the Czech Republic almost identical correlations of appearance dates and BBCH stages were found. In the next step, soil and climate data from Joint Research Centre (JRC) were analyzed together with phenological data in order to evaluate if BBCH stages can be estimated for countries with other climate or soil conditions. This analysis revealed that temperature, global radiation and evaporation were the parameters with the strongest impact. These parameters were used for estimating appearance dates of BBCH stages for other countries. Exemplarily, appearance dates for maize BBCH were calculated for Italy. Estimated and observed appearance dates showed a high concordance (on average six days difference). Finally, the political of impact a variation of a few days on calculated pesticide concentration was analyzed. Exemplarily, the pesticide fate model FOCUS PEARL was used to estimate pesticide groundwater concentrations. When calculating concentrations for application dates varying by ± two weeks, concentrations in groundwater usually varied very little. The highest variation was found for application at BBCH 30 in maize (6.6 % variation over all scenarios). These results showed that the uncertainty included in the estimation of appearance dates of BBCH stages for other countries has a relatively small effect on the results of PEARL and consequentially on the decision of the pesticide risk assessment by changing only the application date.     

Biotic and abiotic transformations of methyl tertiary butyl ether (MTBE)

Background Methyl tertiary butyl ether (MTBE) is a fuel additive which is used all over the world. In recent years it has often been found in groundwater, mainly in the USA, but also in Europe. Although MTBE seems to be a minor toxic, it affects the taste and odour of water at concentrations of < 30 μg/L. Although MTBE is often a recalcitrant compound, it is known that many ethers can be degraded by abiotic means. The aim of this study was to examine biotic and abiotic transformations of MTBE with respect to the particular conditions of a contaminated site (former refinery) in Leuna, Germany. Methods Groundwater samples from wells of a contaminated site were used for aerobic and anaerobic degradation experiments. The abiotic degradation experiment (hydrolysis) was conducted employing an ion-exchange resin and MTBE solutions in distilled water. MTBE, tertiary butyl formate (TBF) and tertiary butyl alcohol (TBA) were measured by a gas chromatograph with flame ionisation detector (FID). Aldehydes and organic acids were respectively analysed by a gas chromatograph with electron capture detector (ECD) and high-performance ion chromatography (HPIC). Results and Discussion Under aerobic conditions, MTBE was degraded in laboratory experiments. Only 4 of a total of 30 anaerobic experiments exhibited degradation, and the process was very slow. In no cases were metabolites detected, but a few degradation products (TBF, TBA and formic acid) were found on the site, possibly due to the lower temperatures in groundwater. The abiotic degradation of MTBE with an ion-exchange resin as a catalyst at pH 3.5 was much faster than hydrolysis in diluted hydrochloric acid (pH 1.0). Conclusion Although the aerobic degradation of MTBE in the environment seems to be possible, the specific conditions responsible are widely unknown. Successful aerobic degradation only seems to take place if there is a lack of other utilisable compounds. However, MTBE is often accompanied by other fuel compounds on contaminated sites and anaerobic conditions prevail. MTBE is often recalcitrant under anaerobic conditions, at least in the presence of other carbon sources. The abiotic hydrolysis of MTBE seems to be of secondary importance (on site), but it might be possible to enhance it with catalysts. Recommendation and Outlook MTBE only seems to be recalcitrant under particular conditions. In some cases, the degradation of MTBE on contaminated sites could be supported by oxygen. Enhanced hydrolysis could also be an alternative. - * The basis of this peer-reviewed paper is a presentation at the 9th FECS Conference on 'Chemistry and Environment', 29 August to 1 September 2004, Bordeaux, France.     

Genotype-specific responses of fluctuating asymmetry and of preadult survival to the effects of lead and temperature stress in Drosophila melanogaster

Although fluctuating asymmetry (FA) increases with exposure to certain types of environmental stressors such as temperature extremes, relatively little is known about the effects of interaction (e.g., synergism) between known sources of environmental stress on FA. Knowledge of such interaction effects, and of the magnitude of genotype-by-environment interaction, are of fundamental importance toward predicting the usefulness of FA as a bioindicator of environmental pollution. We tested for synergistic effects on FA between elevated temperature and exposure to lead, and examined FA responses simultaneously in four genetic strains of Drosophila melanogaster known to differ in their degree of developmental instability, and presumably in their buffering capacity. In the absence of heavy metal, bristle FA increased with temperature, but in the presence of lead, FA at high temperature (30 (degrees)C) was reduced to levels similar, or below, that at lower temperature (25 (degrees)C). This temperature by lead interaction was statistically significant, but paradoxical in that the disruptive effects of temperature appeared to be attenuated in the presence of the heavy metal. In no case was there a significant effect of lead on bristle FAs, despite documented assimilation of heavy metal by flies, and in no case was the genotype by environment interaction significant. Whereas lead treatment did not influence survival, survival was reduced at the high temperature, but significantly so only in one genetic strain (Oregon-R). There was no relationship between survival and FA across stress treatments within lines. Thus, any disproportionate stress-induced mortality in developmentally unstable classes (developmental selection) was unlikely to bias the FA results. Our results underscore the need for independent replication of significant findings before FA-based biomonitoring can be responsibly and effectively implemented. The results call for caution in using FA as a biomarker of stress, because stress factors may interact in complex and unpredictable ways, which could result in erroneous conclusions about real levels of stress present in field populations, under the unduly simplistic assumption that stress factors will act additively to increase FA.     

Metal contamination of riverine sediments below the Avoca mines, south east Ireland

The River Avoca is severely polluted by discharges of acid mine drainage (AMD) from the abandoned sulphur and copper mines at Avoca. The riverine sediments were studied during a low flow period to establish the degree of contamination and to identify the major processes affecting sediment metal concentrations. pH plays a major role in the regulation of zinc adsorption and desorption in sediments, showing a significant correlation (p&0.001). The zinc concentration in the sediment falls below background levels after the input of AMD. However, the metal precipitated when the pH increased downstream of a fertiliser factory (pH8.0), some 7 km below the mine. In contrast Cu and Fe significantly increased (p0.001) both in the sediment (0--30 mm depth) and the surface ochre immediately below the mixing zone. Copper removal appears to be primarily by co-precipitation. Higher sediment enrichment factors for all metals were obtained in the surface sediment layer (ochre) deposited on larger stones and in floc material collected in sediment traps, compared with the subsurface sediment. Cadmium was not recorded in any of the sediment collected at the detection limit used (0.01 g g-1). Metal deposition in the sediments was found to be spacially variable, so sub-sampling is required, although replicates show little variation. Results indicate that short term variation in metal inputs is identified by sampling the surface layer only, whereas sampling of the subsurface layer (<63 m fraction) is more suitable for identifying long-term trends in sediment quality. The implication of sediment analysis in assessing environmental impact is discussed.