AnSBBR applied to the treatment of wastewater from a personal care industry: Effect of organic load and fill time

The objective of this work was to study the technological feasibility of treating wastewater from a personal care industry (PCI-WW) in a mechanically stirred anaerobic sequencing batch biofilm reactor (AnSBBR) containing immobilized biomass on polyurethane foam. An assessment was made on how system efficiency and stability would be affected by: increasing organic load; supplementation of nutrients and alkalinity; and different feed strategies. The AnSBBR operated with 8-h cycles, stirring speed of 400 rpm, temperature of 30 °C, and treated with 2.0 L wastewater per cycle. First the efficiency and stability of the AnSBBR were studied when submitted to an organic loading rate (OLR) of 3.1–9.4 gCOD/(L d), and when the PCI-WW was supplemented with nutrients (sucrose, urea, trace metals) and alkalinity. The AnSBBR was shown to be robust and presented stability and removal efficiency exceeding 90%. At an OLR of 12.0 gCOD/(L d) efficiency became difficult to maintain due to the presence of commercial cleansers and disinfectants in the wastewater lots. In a subsequent stage the AnSBBR treated the wastewater supplemented with alkalinity, but with no nutrients at varying feed strategies and maintaining an OLR of approximately 9.0 gCOD/(L d). The first strategy consists of feeding 2.0 L of the influent batchwise [OLR of 9.4 gCOD/(L d)]. In the second 1.0 L of influent was fed-batchwise and an additional 1.0 L was fed fed-batchwise [OLR of 9.2 gCOD/(L d)], i.e., in relation to the first strategy the feed volume was maintained but supplied in different periods. In the third strategy 1.0 L of treated effluent was maintained in the reactor and 1.0 L of influent was fed fed-batchwise [OLR of 9.0 gCOD/(L d)], i.e., in relation to the first strategy the feed volume was different but the feed period was the same and the OLR was maintained by increasing the influent concentration. Comparison of the first and second strategies revealed that organic matter removal efficiency was unaffected (exceeding 90%). The third strategy resulted in a reduction in average removal efficiency from 91 to 83% when compared to the first one. A kinetic study resulted in first order kinetic parameters ranges from 0.42 to 1.46 h⁻¹ at OLRs from 3.1 to 12.0 gCOD/(L d), respectively, and the second feed strategy [OLR of 9.2 gCOD/(L d)] was shown to be the most favorable.     

The effect of anaerobic digestion and storage on indicator microorganisms in swine and dairy manure

The aim of this experimental study was to evaluate the influence of anaerobic digestion and storage on indicator microorganisms in swine and dairy excreta. Samples were collected every 90 days for 15 months at eight farms, four pig, and four dairy farms, four of them having a biogas plant. Moreover, to evaluate storage effects on samples, 20 l of manure and slurry taken at each farm (digested manure only in farms with a biogas plant) were stored in a controlled climatic chamber at 18 °C, for 6 months. The bacterial load and the chemical-physical characteristics of excreta were evaluated at each sampling time, stored slurry, and manure were sampled and analyzed every 2 months. A high variability of the concentration of bacteria in the different excreta types was observed during the experiment, mainly depending on the type and time of treatment. No sample revealed either the presence of Escherichia coli O157:H7 or of Salmonella, usually linked to the temporary rearing of infected animals in facilities. Anaerobic digestion and storage affected in a significant way the reduction of indicator bacteria like lactobacilli, coliforms, and streptococci. Anaerobic digestion lowered coliforms in pig slurry (? 2.80 log, P < 0.05), streptococci in dairy manure (? 2.44 log, P < 0.001) and in pig slurry (? 1.43 log, P < 0.05), and lactobacilli in pig slurry (? 3.03 log, P < 0.05). Storage lowered coliforms and the other indicators counts, in particular in fresh wastes, while clostridia did not show a reduction in concentration.     

Isotherms and sequential extraction procedures for evaluating sorption and distribution of heavy metals in soils

Heavy metals are potentially toxic to human life and the environment. Their contaminating effect in soils depends on chemical associations. Hence, determining the chemical form of a metal in soils is important to evaluate its mobility and bioavailability. We utilized a sequential extraction procedure and sorption isotherms (monometal and competitive) to evaluate the mobility and distribution of Cd, Cu, Ni, Pb, and Zn in four soils differing in their physicochemical properties: Calcixerollic Xerochrepts (Cx1 and Cx2), Paralithic Xerorthent (Px) and Lithic Haplumbrept (Lh). Most of the metals retained under point B conditions of sorption isotherms were extracted from the more mobile fractions: exchangeable and carbonates, in contrast with the profiles of the original soils where metals were preferently associated with the residual fraction. In soils having carbonate concentration under 6% (Cx1 and Lh), the exchangeable fraction was predominant, whereas in calcareous soils (Cx2 and Px) metals extracted from carbonates predominated. Partitioning profiles were in accordance with the affinity sequences deduced from the initial slope of isotherms and showed that the soils had a greater number of surface sites and higher affinity for Pb and Cu than for Cd, Ni, or Zn. In general, the simultaneous presence of the cations under study increased the percentages of metals released in the exchangeable fraction. The tendency towards less specific forms was more noticeable in Cx2 and Px soils and for Ni, Zn, and Cd. The affinity of inorganic surfaces was larger for Zn than for Cd or Ni, but the affinity of organic surfaces was larger for Cd or Ni than for Zn.     

PCBs and HCHs in a salt-marsh sediment record from South-Central Chile: use of tsunami signatures and 137Cs fallout as temporal markers

This paper documents the occurrence of polychlorinated biphenyl (PCB) and hexachlorocyclohexane (HCH) deposition inferred from a sedimentary record exposed in a salt-marsh trench in South-Central Chile. Sediments were carefully collected every 1 cm from the trench wall. The samples were analyzed for PCBs, HCHs, 137Cs, organic carbon and grain size. The 137Cs fallout and the sedimentary signature left by the 1960 Chilean tsunami were used as temporal markers to estimate the stratigraphic chronology and the sedimentation rates. PCBs were quantified by gas chromatography with electron capture detection (GC-ECD), and positive samples were confirmed by gas chromatography and mass spectrometry detection (GC-MS). Based on these results, PCBs and HCHs deposition over the last 40 years was estimated. No PCBs were detected below the tsunami signature. Total concentrations ranged from undetectable (ND) to 32 ng/g d.w. for PCBs and from undetectable (ND) to 1.29 ng/g d.w. for HCHs. The highest PCB concentrations were found in the upper 7 cm of the core. Even though PCBs were banned in 1982 as electrical fluids in Chile, total estimated PCB fluxes have increased approximately 20 times during the last 40 years: from undetectable values to 102.6 ng/cm2/year, reflecting that PCBs are still in use and being released into the environment.     

Reconstructed mass-spectrometric pattern for characterization of carbon compounds in smoker's lung in situ

BACKGROUND: Cigarette smoke is a major anthropogenic pollutant and contributes to the permanent load of ambient particulate matter in the air, particularly indoors. It is the leading risk factor for premature loss of life due to chronic bronchitis, emphysema and lung cancer. Smoker's lung and graphite pneumoconiosis are pathological states characterized by the deposition of carbonaceous particles. METHODS: Mass spectrometry was used to evaluate unstained lung sections obtained in vivo from a heavy smoker and a patient with occupationally acquired graphite pneumoconiosis. RESULTS AND DISCUSSION: The composition of carbon compounds deposited in lung tissue samples is demonstrated here for the first time. Thirty carbonaceous-containing microareas from ten biopsies (three areas per biopsy) of lung tissues were analyzed mass-spectrometrically. In each case, the samples were taken from a smoker's lung or those demonstrating a graphite pneumoconiosis. The lung-tissue samples were selected by light microscopy before they were evaporated for mass spectrometry. First-order criteria were anionic and cationic mass peaks which occur within the mass patterns in lung tissues of smoker's lung, although not in graphite pneumoconiosis. Second-order criteria were mass peaks from smoker's lung with standard deviations SD < or = 14% of the mean value. First and second-order mass peaks matched the mass peaks of experimental cigarette-smoke condensate in 9 out of 11 peaks. A software program was developed that enabled fast, automated recognition of the typical mass peaks, and thereby confirmed the histological diagnosis of smoker's lung. CONCLUSIONS: The analysis of carbonaceous particles within lung biopsies from a heavy smoker corresponded to the spectra of tobacco condensate and not to the investigated biopsies of graphite peneumoconiosis. RECOMMENDATION AND OUTLOOK: The analyses were performed in order to find out whether mass-spectrometric criteria exist for the differentiation of carbonaceous lung-tissue deposits. Mass spectrometry may be a valuable tool in determining the composition of carbon compounds deposited in human lung tissue. So far, qualitative assessment of the composition of deposits in lung tissue is only possible after the patient is deceased (autopsy).     

Competitive sorption of heavy metal by soils. Isotherms and fractional factorial experiments

Competing ions strongly affect heavy metal sorption onto the solid surfaces of soil. This study evaluated competitive sorption of Cd, Cu, Ni, Pb and Zn on three soils: Calcixerollic Xerochrept, Paralithic Xerorthent and Lithic Haplumbrept. Monometal and competitive sorption isotherms were obtained at 25 degrees C. The individual effect of ions on retention of the others was ascertained by a fractional factorial analysis design. Most of the sorption isotherms belonged to type L subtype 2 in the classification of Giles. In competitive sorption the initial linear part was shorter and the knee sharper when compared with monometal sorption isotherms. Parameters related to sorptive capacity, such as Point B, Langmuir monolayer and Freundlich distribution coefficient, were higher in monometal than in competitive sorption, and in basic soils than in acidic soil. Calcium desorbed at different points of the sorption isotherms indicated that cationic exchange with Ca was the main retention mechanism in calcareous soils. For Pb, the ratio Ca desorbed/Pb sorbed was close to one; for Cu, Ni and Zn the ratio ranged from 1.20 to 1.37, probably due to partial dissolution of calcium carbonates by hydrolytic processes during retention. On the other hand, Cd had a ratio around 0.6 reflecting another additional retention mechanism, probably surface complexation. Fractional factorial design confirmed that the presence of the cations investigated reduced the amount of the five metals retained, but the presence of Cu and Pb in the system depressed Ni, Cd and Zn sorption more than the inverse. Cation mobility was enhanced when equilibrium concentration increased and the effect was higher in Ca-saturated soils.     

Detection of Hepatitis E Virus in Livers and Muscle Tissues of Wild Boars in Italy

Food and Environmental Virology - In industrialized countries, hepatitis E is now recognized as an emerging zoonosis. Autochthonous cases have been increased over recent years in Europe and are...     

Ultrastructural and chemical characterization of egg surface of honeybee worker and queen-laid eggs

Summary. Worker policing in honeybees predicts the evolution of a mechanism to discriminate between queenand worker-born eggs. Although it has been postulated that this discrimination is based on an egg recognition pheromone, neither the chemistry nor the glandular source were elucidated. To verify whether egg discrimination might be based on structural differences, we compared the ultrastructure surface of queen-laid diploid and haploid eggs to that of worker-laid eggs using SEM. Only small differences between the different types of eggs were found. Thus, at least based on the fine structure of the egg surface, queen eggs are indistinguishable from worker-laid eggs.To explore the chemosensory hypothesis for egg discrimination, we conducted a detailed comparative chemical analysis of the different egg types. The coating of all egg types was dominated by linear alkanes, but queen eggs, diploid and haploid, differed from those of workers on two accounts: 1. The diversity of compounds found on queenlaid eggs was much greater than found on worker-laid eggs, mainly due to the number of hydrocarbons. 2. Acetates of some fatty alcohols, alkenes and especially monomethylalkanes were characteristic to queen eggs. The origin of the two latter substances and the acetates is still unknown. Whether these compounds constitute the signal that enables police workers to discriminate between queen- and workerborn eggs remains to be investigated.