Effects of the herbicide molinate on the metabolic activities of a degradative Streptomyces griseus strain

Abstract

Cometabolic degradation of the herbicide molinate was tested using two microorganisms, Arthrobacter sp., strain M3 and Streptomyces griseus strain M2; the latter classified on the basis of the presence of the enzymatic cofactor SF‐420. The strains M3 and M2, inoculated in a basic salts medium with glucose as carbon source and added with 100 mg L^‐1 of molinate, degraded respectively 35 and 51% of the herbicide in 36 days.

Increasing concentrations of molinate, ranging from 50 to 200 mg L^‐1 in glucose medium, did not affect the final ATP yield of the strain M2, but decreased the final growth yield and the ATP synthesis rate. Moreover, the onset of coenzyme SF‐420 synthesis was progressively delayed.

In contrast, surprisingly, SF‐420 final yield and production rate were increased by progressive increasing concentrations of molinate in the mineral medium.     

Screening of endocrine-disrupting phenols, herbicides, steroid estrogens, and estrogenicity in drinking water from the waterworks of 35 Italian cities and from PET-bottled mineral water

We investigated contamination by endocrine-disrupting chemicals in drinking water from 35 major Italian cities and five popular Italian brands of bottled mineral water. The quality of Italian drinking water was assessed by combing chemical analysis with bioassay to quantify specific estrogenic contaminants and to characterize the actual biological effect of the mixture of chemicals present in drinking water including the contribution of not targeted compounds. The selected contaminants were natural and synthetic steroid estrogens, alkylphenols and bisphenol A, linuron, triazine herbicides, and their metabolites. A specific analytical method was developed based on solid phase extraction of 1 L of water and concentration to 100 μL for quantification by electrospray ionization liquid chromatography tandem mass spectrometry, achieving quantification limits of 0.05–0.36 ng/L for herbicides and 0.64–7.70 ng/L for steroids and phenols. No steroid estrogens were detected in any of the samples, while bisphenol A and nonylphenols were detected in the ranges of 0.82–102.00 and 10.30–84.00 ng/L respectively. Herbicides and their degradation products, when present, were found from slightly above the quantification limits up to 49.91 ng/L, mainly from cities in northern Italy. Chemical analyses were complemented by the performance of a bioassay for the determination of the estrogenic activity in the extracts based on the transactivation of estrogen receptor α-transfected reporter HeLa-ERE-Luciferase-Neomycin cell line. Activity was generally low with maximum estrogenicity of 13.6 pg/L estradiol equivalents.     

Degradation of clofibric acid in acidic aqueous medium by electro-Fenton and photoelectro-Fenton

Acidic aqueous solutions of clofibric acid (2-(4-chlorophenoxy)-2-methylpropionic acid), the bioactive metabolite of various lipid-regulating drugs, have been degraded by indirect electrooxidation methods such as electro-Fenton and photoelectro-Fenton with Fe(2+) as catalyst using an undivided electrolytic cell with a Pt anode and an O(2)-diffusion cathode able to electrogenerate H(2)O(2). At pH 3.0 about 80% of mineralization is achieved with the electro-Fenton method due to the efficient production of oxidant hydroxyl radical from Fenton's reaction between Fe(2+) and H(2)O(2), but stable Fe(3+) complexes are formed. The photoelectro-Fenton method favors the photodecomposition of these species under UVA irradiation, reaching more than 96% of decontamination. The mineralization current efficiency increases with rising metabolite concentration up to saturation and with decreasing current density. The photoelectro-Fenton method is then viable for treating acidic wastewaters containing this pollutant. Comparative degradation by anodic oxidation (without Fe(2+)) yields poor decontamination. Chloride ion is released during all degradation processes. The decay kinetics of clofibric acid always follows a pseudo-first-order reaction, with a similar rate constant in electro-Fenton and photoelectro-Fenton that increases with rising current density, but decreases at greater metabolite concentration. 4-Chlorophenol, 4-chlorocatechol, 4-chlororesorcinol, hydroquinone, p-benzoquinone and 1,2,4-benzenetriol, along with carboxylic acids such as 2-hydroxyisobutyric, tartronic, maleic, fumaric, formic and oxalic, are detected as intermediates. The ultimate product is oxalic acid, which forms very stable Fe(3+)-oxalato complexes under electro-Fenton conditions. These complexes are efficiently photodecarboxylated in photoelectro-Fenton under the action of UVA light.     

Degradation of the herbicide 2,4-DP by anodic oxidation, electro-Fenton and photoelectro-Fenton using platinum and boron-doped diamond anodes

This paper reports the degradation of 2,4-DP (2-(2,4-dichlorophenoxy)-propionic acid) solutions of pH 3.0 by environmentally friendly electrochemical methods such as anodic oxidation, electro-Fenton and photoelectro-Fenton with a Pt or boron-doped diamond (BDD) anode. In the two latter techniques an O(2)-diffusion cathode was used and 1.0mM Fe(2+) was added to the solution to give hydroxyl radical (*OH) from Fenton's reaction between Fe(2+) and H(2)O(2) generated at the cathode. All treatments with BDD are viable to decontaminate acidic wastewaters containing 2,4-DP since they give complete mineralization, with loss of chloride ion, at high current due to the great production of oxidant *OH at the BDD surface favoring the destruction of final carboxylic acids. *OH formed from Fenton's reaction destroys more rapidly aromatic products, making the electro-Fenton and photoelectro-Fenton processes much more efficient than anodic oxidation. UVA light in photoelectro-Fenton with BDD has little effect on the degradation rate of pollutants. The comparative procedures with Pt lead to slower decontamination because of the lower oxidizing power of this anode. The effect of current on the degradation rate and efficiency of all methods is studied. The 2,4-DP decay always follows a pseudo-first-order kinetics. Chlorohydroquinone, chloro-p-benzoquinone and maleic, fumaric, malic, lactic, pyruvic, acetic, formic and oxalic acids are detected as products by chromatographic techniques. A general sequence accounting for by the reaction of all these intermediates with the different oxidizing agents is proposed.     

Calibration and validation of a dynamic water model in agricultural scenarios

A dynamic aquatic model (DynA model) was previously developed to predict the fate of a chemical in aquatic scenarios characterized by daily or periodic changes in several input parameters. DynA model is here calibrated with data obtained from the literature in specific unsteady state scenarios, such as those of rice fields. The results obtained for two herbicides (cinosulfuron and pretilachlor) in rice paddy scenarios revealed the capability of the model to accurately predict water and sediment concentrations, as shown by some statistical indicators. Modelling efficiency (EF) values of 0.86-0.99 for the water compartment and of 0.77-0.84 for sediment show the good agreement between predicted and measured concentrations. An "external validation" was performed using measured data for a different herbicide (molinate) applied in a Portuguese paddy rice scenario. A sensitivity analysis for this volatile chemical revealed the influence of some climatic parameters (e.g. temperature) to the model outcomes, such as water and sediment concentrations. This confirmed the capability of DynA model as an efficient tool for the pesticide risk assessment in dynamic scenarios.     

Modelling built-up land take in Europe to 2020: an assessment of the Resource Efficiency Roadmap measure on land

Land taken by artificial surfaces has an impact on the quality of life and ecosystems. To reduce possible negative impacts of land take, the European Commission proposed setting a milestone objective for 2020 in terms of future rates of land take.

This paper describes a methodology to model the impacts of the 2020 land-take milestone proposed in the RERM in the European Union 27 MS. An integrated modelling framework was configured to assess the spatial impact of two land-take scenarios: a ‘Reference’ scenario, which is driven by demographic and economic trends, and a ‘Target 0’ scenario that follows the 2020 land-take milestone proposed in the RERM. We conclude that the implementation of the 2020 land-take milestone, by reducing future land take in Europe, will foster more efficient use of land (less land taken for the same activity levels) and minimise negative impacts on non-artificial land uses.     

Nitrogen source effects on soil nitrous oxide emissions from strip-till corn

Nitrogen (N) application to crops generally results in increased nitrous oxide (NO) emissions. Commercially available, enhanced-efficiency N fertilizers were evaluated for their potential to reduce NO emissions from a clay loam soil compared with conventionally used granular urea and urea-ammonium nitrate (UAN) fertilizers in an irrigated strip-till (ST) corn ( L.) production system. Enhanced-efficiency N fertilizers evaluated were a controlled-release, polymer-coated urea (ESN), stabilized urea, and UAN products containing nitrification and urease inhibitors (SuperU and UAN+AgrotainPlus), and UAN containing a slow-release N source (Nfusion). Each N source was surface-band applied (202 kg N ha) at corn emergence and watered into the soil the next day. A subsurface-band ESN treatment was included. Nitrous oxide fluxes were measured during two growing seasons using static, vented chambers and a gas chromatograph analyzer. All N sources had significantly lower growing season NO emissions than granular urea, with UAN+AgrotainPlus and UAN+Nfusion having lower emissions than UAN. Similar trends were observed when expressing NO emissions on a grain yield and N uptake basis. Loss of NO-N per kilogram of N applied was <0.8% for all N sources. Corn grain yields were not different among N sources but greater than treatments with no N applied. Selection of N fertilizer source can be a mitigation practice for reducing NO emissions in strip-till, irrigated corn in semiarid areas.     

Competitive sorption of heavy metal by soils. Isotherms and fractional factorial experiments

Competing ions strongly affect heavy metal sorption onto the solid surfaces of soil. This study evaluated competitive sorption of Cd, Cu, Ni, Pb and Zn on three soils: Calcixerollic Xerochrept, Paralithic Xerorthent and Lithic Haplumbrept. Monometal and competitive sorption isotherms were obtained at 25 degrees C. The individual effect of ions on retention of the others was ascertained by a fractional factorial analysis design. Most of the sorption isotherms belonged to type L subtype 2 in the classification of Giles. In competitive sorption the initial linear part was shorter and the knee sharper when compared with monometal sorption isotherms. Parameters related to sorptive capacity, such as Point B, Langmuir monolayer and Freundlich distribution coefficient, were higher in monometal than in competitive sorption, and in basic soils than in acidic soil. Calcium desorbed at different points of the sorption isotherms indicated that cationic exchange with Ca was the main retention mechanism in calcareous soils. For Pb, the ratio Ca desorbed/Pb sorbed was close to one; for Cu, Ni and Zn the ratio ranged from 1.20 to 1.37, probably due to partial dissolution of calcium carbonates by hydrolytic processes during retention. On the other hand, Cd had a ratio around 0.6 reflecting another additional retention mechanism, probably surface complexation. Fractional factorial design confirmed that the presence of the cations investigated reduced the amount of the five metals retained, but the presence of Cu and Pb in the system depressed Ni, Cd and Zn sorption more than the inverse. Cation mobility was enhanced when equilibrium concentration increased and the effect was higher in Ca-saturated soils.     

Isotherms and sequential extraction procedures for evaluating sorption and distribution of heavy metals in soils

Heavy metals are potentially toxic to human life and the environment. Their contaminating effect in soils depends on chemical associations. Hence, determining the chemical form of a metal in soils is important to evaluate its mobility and bioavailability. We utilized a sequential extraction procedure and sorption isotherms (monometal and competitive) to evaluate the mobility and distribution of Cd, Cu, Ni, Pb, and Zn in four soils differing in their physicochemical properties: Calcixerollic Xerochrepts (Cx1 and Cx2), Paralithic Xerorthent (Px) and Lithic Haplumbrept (Lh). Most of the metals retained under point B conditions of sorption isotherms were extracted from the more mobile fractions: exchangeable and carbonates, in contrast with the profiles of the original soils where metals were preferently associated with the residual fraction. In soils having carbonate concentration under 6% (Cx1 and Lh), the exchangeable fraction was predominant, whereas in calcareous soils (Cx2 and Px) metals extracted from carbonates predominated. Partitioning profiles were in accordance with the affinity sequences deduced from the initial slope of isotherms and showed that the soils had a greater number of surface sites and higher affinity for Pb and Cu than for Cd, Ni, or Zn. In general, the simultaneous presence of the cations under study increased the percentages of metals released in the exchangeable fraction. The tendency towards less specific forms was more noticeable in Cx2 and Px soils and for Ni, Zn, and Cd. The affinity of inorganic surfaces was larger for Zn than for Cd or Ni, but the affinity of organic surfaces was larger for Cd or Ni than for Zn.     

Major shifts in Amazon wildlife populations from recent intensification of floods and drought

In the western Amazon Basin, recent intensification of river‐level cycles has increased flooding during the wet seasons and decreased precipitation during the dry season. Greater than normal floods occurred in 2009 and in all years from 2011 to 2015 during high‐water seasons, and a drought occurred during the 2010 low‐water season. During these years, we surveyed populations of terrestrial, arboreal, and aquatic wildlife in a seasonally flooded Amazonian forest in the Loreto region of Peru (99,780 km²) to study the effects of intensification of natural climatic fluctuations on wildlife populations and in turn effects on resource use by local people. Shifts in fish and terrestrial mammal populations occurred during consecutive years of high floods and the drought of 2010. As floods intensified, terrestrial mammal populations decreased by 95%. Fish, waterfowl, and otter (Pteronura brasiliensis) abundances increased during years of intensive floods, whereas river dolphin and caiman populations had stable abundances. Arboreal species, including, macaws, game birds, primates, felids, and other arboreal mammals had stable populations and were not affected directly by high floods. The drought of 2010 had the opposite effect: fish, waterfowl, and dolphin populations decreased, and populations of terrestrial and arboreal species remained stable. Ungulates and large rodents are important sources of food and income for local people, and large declines in these animals has shifted resource use of people living in the flooded forests away from hunting to a greater reliance on fish.