Factors controlling measurements of radon mass exhalation rate

Radon mass exhalation rate of soil samples was measured using an exhalation chamber of 10 dm(3) volume and a Lucas cell. The results show that mass of sample, grain size and water content influence the radon mass exhalation rate. For soil of (226)Ra activity concentration about 2500 Bq kg(-1) and samples within the range from 0.20 kg to 0.50 kg, the radon mass exhalation rate values are higher than those for samples of other masses. The observed radon exhalation rate is an inverse function of the average grain size. At the water content about 6% by weight, the radon mass exhalation rate reaches maximum, then it decreases with both increasing and decreasing of the water content in the sample.     

Utilization of magnetic and electrostatic separation in the recycling of printed circuit boards scrap

The progress of the technology is directly related to the growth of production and consumption of electrical/electronics equipment, especially of personal computers. This type of equipment has a relatively short average lifetime, 2-3 years. The amount of defective or obsolete equipment has been increasing substantially; consequently its disposition and/or recycling should be studied. In this work, printed circuit boards, which are used in personal computers, were studied in order to recover the metals in the circuit boards through mechanical processing, such as crushing, screening, as well as magnetic and electrostatic separation. The results obtained demonstrate the feasibility of using these processes to separate metal fractions from polymers and ceramics, and that it is possible to obtain a fraction concentrated in metals containing more than 50% on average of copper, 24% of tin and 8% of lead.     

Avoidance behaviour of Enchytraeus albidus: effects of benomyl, carbendazim, phenmedipham and different soil types

Enchytraeids are typical inhabitants of many soils, contributing to vital processes of this environmental compartment. Indirectly they are involved in regulating the degradation of organic matter, as well as improving the pore structure of the soil. Due to their behaviour, they are able to avoid unfavourable environmental conditions. Avoidance tests with enchytraeids, initially developed with earthworms by several authors, are quick and easy to perform. With these tests a first assessment of the toxicity of a (contaminated or spiked) soil is possible in just 48 h by using the reaction of the enchytraeids as measurement endpoint. In this period of time the organisms can choose between the control soil and the other soil (a contaminated or spiked or another soil with different physico-chemical properties). In the tests reported here, the enchytraeids were exposed to control soils spiked with the fungicides Benomyl and Carbendazim and the herbicide Phenmedipham. Several chemical concentrations were tested in order to evaluate the avoidance behaviour to toxic substances. In fact, often these short-term screening tests gave results showing avoidance at concentrations in a range similar to the acute test results but, higher than in chronic tests. Further tests are needed to decide whether the results gained in this study can be extrapolated to other chemicals. It is proposed to standardize the Enchytraeid Avoidance Test as it is currently done for the Earthworm Avoidance Test by the International Standard Organization (ISO).     

Should 'Cyrus the Centipede' take a hike? Effects of exposure to a pedestrian safety program on children's safety knowledge and self-reported behaviors

INTRODUCTION: We report the first evaluation of the popular "Cyrus the Centipede" child pedestrian safety program. METHOD: A pre-test/post-test control versus experimental condition design was used to assess Cyrus' impact on third graders' pedestrian safety knowledge, and self-reported pedestrian behaviors. RESULTS: Although some beneficial effects were observed, the program was not reliably effective. In particular, the impact of exposure to Cyrus was strongly influenced by the individual teacher who delivered it, likely due to the highly unstructured nature of the curriculum. SUMMARY: We suggest that: (a) the effectiveness and reliability of such programs be demonstrated before they are widely adopted; and (b) programs that focus on training children in actual or simulated traffic environments may be more effective than those that primarily focus on teaching safety facts and rules.     

Genuine modern analogues of Precambrian stromatolites from caldera lakes of Niuafoʻou Island, Tonga

Calcareous or dolomitic, often secondarily silicified, laminated microbial structures known as stromatolites are important keys to reconstruct the chemical and biotic evolution of the early ocean. Most authors assume that cyanobacteria-associated microbialitic structures described from Shark Bay, Western Australia, and Exuma Sound, Bahamas, represent modern marine analogues for Precambrian stromatolites. Although they resemble the Precambrian forms macroscopically, their microstructure and mineralogical composition differ from those characterizing their purported ancient counterparts. Most Precambrian stromatolites are composed of presumably in situ precipitated carbonates, while their assumed modern marine analogues are predominantly products of accretion of grains trapped and bound by microbial, predominantly cyanobacterial, benthic mats and biofilms and only occasionally by their physicochemical activity. It has therefore been suggested that the carbonate chemistry of early Precambrian seawater differed significantly from modern seawater, and that some present-day quasi-marine or non-marine environments supporting growth of calcareous microbialites reflect the hydrochemical conditions controlling the calcification potential of Precambrian microbes better than modern seawater. Here we report the discovery of a non-marine environment sustaining growth of calcareous cyanobacterial microbialites showing macroscopic and microscopic features resembling closely those described from many Precambrian stromatolites.     

Copper binding by peat fulvic and humic acids extracted from two horizons of an ombrotrophic peat bog

We studied the binding of Cu(II) to humic acids and fulvic acids extracted from two horizons of an ombrotrophic peat bog by metal titration experiments at pH 4.5, 5.0, 5.5, and 6.0 and 0.1 M KNO3 ionic strength. Free metal ion concentrations in solution were measured using an ion selective electrode. The amounts of base required to maintain constant pH conditions were recorded and used to calculate H+/Cu2+ exchange ratios. The amount of Cu(II) bound to the humic fractions was greater than the amount bound to the fulvic fractions and only at the highest concentrations of metal ion the amount of Cu(II) sorbed by both fractions became equal. The proton to metal ion exchange ratios are similar for all humic substances, with values ranging from 1.0 to 2.0, and decreasing with increased pH. The amount of Cu(II) bound is practically independent of the horizon from which the sample was extracted. The results indicate that the humic substances show similar cation binding behaviour, despite the differences in chemical composition. The copper binding data are quantitatively described with the NICA-Donnan model, which allows to characterize only the carboxylic type binding sites. The values of the binding constants are higher for the humic acids than for the fulvic acids.     

Enantiomeric fractions and congener specific determination of polychlorinated biphenyls in eggs of predatory birds from Doñana National Park (Spain)

The content of 30 polychlorinated biphenyls (PCBs) and the enantiomeric fractions of 10 chiral PCBs were determined in 17 infertile eggs from three different predatory bird species collected in Do?ana National Park (DNP, Spain) in the period 1999-2000. The highest PCB concentration was found in eggs from red kites (0.52-110 microg/g on a fresh weight basis, f.w.) followed by buzzard (0.08-13 microg/g f.w.) and booted eagle (0.10-1.5 microg/g f.w.). Seventy-five percent of the red kite eggs had PCB levels above 4.7 microg/g f.w., which is associated in the literature with reproductive failure. This could be related to the fact that red kite populations have decreased by more than 50% in the last five years in DNP. PCBs # 138, 153, and 180 were the most abundant in all cases. This is the first time that atropisomers of 10 chiral PCBs (PCBs # 45, 84, 91, 95, 132, 135, 136, 149, 174, and 176) in predatory bird eggs have been performed. The enantiomeric fractions (EFs) for most PCBs investigated were non-racemic (EF not = 0.5), ranging from 0.05 to 0.95. The results suggested that predatory birds, mainly red kite species, are highly polluted by PCBs, and PCBs # 95, 132, 135, 136, and 174 strongly deviate from the racemic-mixture values.     

Effects of initial saturation on properties modification and displacement of tetrachloroethene with aqueous isobutanol

Packed column experiments were conducted to study effects of initial saturation of tetrachloroethene (PCE) in the range of 1.0-14% pore volume (PV) on mobilization and downward migration of the non-aqueous phase liquid (NAPL) product upon contact with aqueous isobutanol ( approximately 10 vol.%). This study focused on the consequences of swelling beyond residual saturation. Columns were packed with mixtures of neat PCE, water and glass beads and waterflooded to establish a desired homogeneous residual saturation, and then flooded with aqueous isobutanol under controlled hydraulic conditions. Results showed a critical saturation of approximately 8% PV for these packed column experimental conditions. At low initial PCE saturations (<8% PV), experimental results showed reduced risk of NAPL-product migration upon contact with aqueous isobutanol. At higher initial PCE saturations (>8% PV), results showed NAPL-product mobilization and downward migration which was attributed to interfacial tension (IFT) reduction, swelling of the NAPL-product, and reduced density modification. Packed column results were compared with good agreement to theoretical predictions of NAPL-product mobilization using the total trapping number, N(T). In addition to the packed column study, preliminary batch experiments were conducted to study the effects of PCE volumetric fraction in the range of 0.5-20% on density, viscosity, and IFT modification as a function of time following contact with aqueous isobutanol ( approximately 10 vol.%). Modified NAPL-product fluid properties approached equilibrium within approximately 2 h of contact for density and viscosity. IFT reduction occurred immediately as expected. Measured fluid properties were compared with good agreement to theoretical equilibrium predictions based on UNIQUAC. Overall, this study demonstrates the importance of initial DNAPL saturation, and the associated risk of downward NAPL-product migration, in applying alcohol flooding for remediation of DNAPL contaminated ground water sites.     

A review and numerical assessment of the random walk particle tracking method

We review the basic mathematical concepts of random walk particle tracking (RWPT) and its advantages and limitations. Three different numerical approaches to overcome the local mass conservation problem of the random walk methodology are examined: (i) the interpolation method, (ii) the reflection principle, and (iii) the generalized stochastic differential equations (GSDE). Analytical solutions of the spatial moments for a two-layer system are compared to model predictions using the different techniques and results demonstrate that the interpolation method reproduces correctly average velocity, but fails to reproduce macrodispersion at higher hydraulic conductivity contrasts between the two layers. On the contrary, the reflection principle and the GSDE approach underestimate average velocity, but reproduce macrodispersion better for high contrasts. The different behavior is based on an artificial shift of mass for increasing heterogeneities for the GSDE approach and the reflection principle, whereas the interpolation method suffers from the smoothing of the dispersion tensor. The behavior of these approaches was furthermore analyzed in two-dimensional heterogeneous hydraulic conductivity fields, which are characterized by different random function models. Solute transport was simulated correctly by all three approaches for the reference fields having Gaussian structures or non-Gaussian structures with an isotropic spatial correlation, even for a variance of the natural log of hydraulic conductivity of sigma(lnK)(2)=4. However, for the non-Gaussian model with a strong anisotropic spatial correlation and a variance of sigma(lnK)(2)=2 and higher, the interpolation method was the only technique modelling solute transport correctly. Furthermore, we discuss the general applicability of random walk particle tracking in comparison to the standard transport models and conclude that in advection-dominated problems using a high spatial discretization or requiring the performance of many model runs, RWPT represents a good alternative for modelling contaminant transport.     

Dip-angle influence on areal DNAPL recovery by co-solvent flooding with and without pre-flooding

A two-dimensional (2D) laboratory model was used to study effects of gravity on areal recovery of a representative dense non-aqueous phase liquid (DNAPL) contaminant by an alcohol pre-flood and co-solvent flood in dipping aquifers. Recent studies have demonstrated that injection of alcohol and co-solvent solutions can be used to reduce in-situ the density of DNAPL globules and displace the contaminant from the source zone. However, contact with aqueous alcohol reduces interfacial tension and causes DNAPL swelling, thus facilitating risk of uncontrolled downward DNAPL migration. The 2D laboratory model was operated with constant background gradient flow and a DNAPL spill was simulated using tetrachloroethene (PCE). The spill was dispersed to a trapped, immobile PCE saturation by a water flood. Areal PCE recovery was studied using a double-triangle well pattern to simulate a remediation scheme consisting of an alcohol pre-flood using aqueous isobutanol ( approximately 10% vol.) followed by a co-solvent flood using a solution of ethylene glycol (65%) and 1-propanol (35%). Experiments were conducted with the 2D model oriented in the horizontal plane and compared to experiments at the 15 degrees and 30 degrees dip-angle orientations. Injection was applied either in the downward or upward direction of flow. Experimental results were compared to theoretical predictions for flood front stability and used to evaluate effects of gravity on areal PCE recovery. Sensitivity experiments were performed to evaluate effects of the alcohol pre-flood on PCE areal recovery. For experiments conducted with the alcohol pre-flood and the 2D model oriented in the horizontal plane, results indicate that 89-93% of source zone PCE was recovered. With injection oriented downward, results indicate that areal PCE recovery was 70-77% for a 15 degrees dip angle and 57-59% for a 30 degrees dip angle. With injection oriented upward, results indicate that areal PCE recovery was 57-60% at the 30 degrees dip angle, which was similar to PCE recovery for injection in the downward flow direction. Lower areal PCE recovery at greater dip angles in either direction of flow was attributed to DNAPL swelling and migration, flood front instabilities and bypassing of the displaced fluid past the extraction wells during the alcohol pre-flood. Additional results demonstrate that the use of an alcohol pre-flood can be beneficial in improving DNAPL recovery in the horizontal orientation, but pre-flooding may reduce areal recovery efficiency in dip-angle orientations. This study also demonstrates the use of theoretical perturbation (fingering) analysis in predicting NAPL recovery efficiency for flooding processes in remediating aquifers with dip angles.