Understanding communication and coordination among government and service organisations after a disaster

The purpose of this study is to discover how coordination and communication between the government and service organisations responsible for the relief effort following Hurricane Katrina contributed to the poor outcomes for the communities impacted by the storm. Two hypotheses were tested in this study: communication was positively correlated with the degree of coordination immediately following Katrina; and miscommunication was negatively correlated with the degree of coordination after the storm. Quantitative content analysis of media reports was used to analyse the data and test the hypotheses. Both communication and miscommunication were found to be positively correlated with coordination. The results of this study suggest that increasing interorganisational communication and establishing clearly defined roles for organisations must be a high priority in revamping organisational protocol on disaster response if any new approach is to be successful.     

The effects of starvation and acute low salinity exposure on food intake in the Dungeness crab, Cancer magister

Adult Cancer magister make forays into hyposaline estuarine habitats during times of high food abundance. However, as weak osmoregulators, they are poorly equipped to deal with the concurrent demands of osmoregulation and digestion. Therefore, the potential interaction between nutritional status and feeding in a physiologically challenging environment was investigated. Changes in the proportion of crabs feeding, the amount of food consumed, the time spent feeding, and the efficiency with which a meal was consumed were examined in response to the length and severity of hyposaline exposure, and the duration of starvation. Reductions in the (a) number of animals feeding, (b) the amount of food consumed, and (c) the time spent feeding were observed in salinities where C. magister actively osmoregulates the concentration of its internal fluids. Although this reduction in feeding was likely a stress response, the crabs were able evaluate the level of salinity stress: there was a dose-dependent reduction in feeding, and they were able to discriminate between salinities separated by as little as 3.5‰. The likelihood that animals would feed in low salinity increased with starvation. Thus, the aversion to food uptake in physiologically stressful conditions may be overridden by the need to procure nutrients. In the natural environment, we suggest that C. magister are employing an ‘eat and run’ strategy, moving into the estuary, consuming a meal, and retreating to higher salinities to digest.     

Towards a Duty of Care for Biodiversity

The decline in biodiversity is a worldwide phenomenon, with current rates of species extinction more dramatic than any previously recorded. Habitat loss has been identified as the major cause of biodiversity decline. In this article we suggest that a statutory duty of care would complement the current mix of policy options for biodiversity conservation. Obstacles hindering the introduction of a statutory duty of care include linguistic ambiguity about the terms ‘duty of care’ and ‘stewardship’ and how they are applied in a natural resource management context, and the absence of a mechanism to guide its implementation. Drawing on international literature and key informant interviews we have articulated characteristics of duty of care to reduce linguistic ambiguity, and developed a framework for implementing a duty of care for biodiversity at the regional scale. The framework draws on key elements of the common law ‘duty of care’, the concepts of ‘taking reasonable care’ and ‘avoiding foreseeable harm’, in its logic. Core elements of the framework include desired outcomes for biodiversity, supported by current recommended practices. The focus on outcomes provides opportunities for the development of innovative management practices. The framework incorporates multiple pathways for the redress of non-compliance including tiered negative sanctions, and positive measures to encourage compliance. Importantly, the framework addresses the need for change and adaptation that is a necessary part of biodiversity management.     

Beryllium-7 atmospheric deposition and sediment inventories in the Neponset River estuary,Massachusetts, USA

Measured monthly atmospheric depositional fluxes of cosmogenically produced ⁷Be ranged from 1 to 67 mBq/cm² in Boston, Massachusetts between September 2000 and August 2007. These fluxes exhibited seasonality and supported a decay-corrected ⁷Be atmospheric depositional running inventory that ranged from 36 to 144 mBq/cm². Annual ⁷Be deposition exhibited an increasing trend that may reflect a general decrease in solar activity and a general increase in precipitation over the 7-year sampling period. To investigate short-term sediment dynamics and accumulation patterns in the Neponset River estuary, we collected six sediment cores in July 2006 and measured ⁷Be sediment inventories ranging from 48 to 546 mBq/cm² Comparisons of these sediment inventories with the ⁷Be running inventory from atmospheric deposition (101 mBq/cm²) at the time of core collection indicated a large degree of spatial heterogeneity in sediment accumulation patterns and its potential use as a tool for assessing the impacts of environmental restoration activities in estuarine environments.     

Flood management: prediction of microbial contamination in large-scale floods in urban environments

With a changing climate and increased urbanisation, the occurrence and the impact of flooding is expected to increase significantly. Floods can bring pathogens into homes and cause lingering damp and microbial growth in buildings, with the level of growth and persistence dependent on the volume and chemical and biological content of the flood water, the properties of the contaminating microbes, and the surrounding environmental conditions, including the restoration time and methods, the heat and moisture transport properties of the envelope design, and the ability of the construction material to sustain the microbial growth. The public health risk will depend on the interaction of these complex processes and the vulnerability and susceptibility of occupants in the affected areas. After the 2007 floods in the UK, the Pitt review noted that there is lack of relevant scientific evidence and consistency with regard to the management and treatment of flooded homes, which not only put the local population at risk but also caused unnecessary delays in the restoration effort. Understanding the drying behaviour of flooded buildings in the UK building stock under different scenarios, and the ability of microbial contaminants to grow, persist, and produce toxins within these buildings can help inform recovery efforts. To contribute to future flood management, this paper proposes the use of building simulations and biological models to predict the risk of microbial contamination in typical UK buildings. We review the state of the art with regard to biological contamination following flooding, relevant building simulation, simulation-linked microbial modelling, and current practical considerations in flood remediation. Using the city of London as an example, a methodology is proposed that uses GIS as a platform to integrate drying models and microbial risk models with the local building stock and flood models. The integrated tool will help local governments, health authorities, insurance companies and residents to better understand, prepare for and manage a large-scale flood in urban environments.     

A novel use of anaerobically digested liquid swine manure to potentially control soybean cyst nematode

Experiments were carried out in two steps to determine the effect of anaerobically digested swine manure on soybean cyst nematode (SCN) egg control. In the first step, liquid swine manure underwent anaerobic digestion to search for the best digestion time for both volatile fatty acids (VFA) and ammonium nitrogen (NH(4)(+)) enrichment. The results showed that about 17 and 28 days of incubation were needed, respectively, to reach the maximal levels of VFA and NH(4)(+) in the manure. In the second step, raw, VFA-enriched, and NH(4)(+)-enriched manure were applied separately, at four different rates (25, 50, 100, and 200 mL/pot), to soil pots inoculated with nematode eggs in a greenhouse environment. Soil samples were collected 35 and 61 days after inoculation to determine the effect of such treated manure on SCN egg productivity. The data indicated that the SCN egg counts were inversely related to the manure application rates in a linear manner with correlation coefficients of 0.998, 0.967, and 0.900 for raw, NH(4)(+)-enriched, and VFA-enriched manure for the 35-day samples. While no such relationships were found for the 61-day samples, implying that none of the treatments were still effective 61 days after application. At the four application rates, the VFA-enriched manure performed best in reducing SCN egg counts (by 18.1, 19.5, 34.3, and 18.6%) as compared to the raw manure treatment. In contrast, the NH(4)(+)-enriched manure achieved mostly negative reductions. To achieve the best control of SCN egg growth, the VFA-enriched manure should be used and applied to soybean fields every 35 days.     

Fluorocarbons in the Los Angeles Basin

Ambient air concentrations of fluorocarbon 11 (fluorotrichloromethane) and fluoro-carbon 12 (dichlorodifluoromethane) have been measured using a gas chro-matograph equipped with a pulsed, electron capture detector. Air samples taken on a moderately smoggy day in July 1970, at several locations near Los Angeles gave average readings of fluorocarbon 12, 0.7 ppb and fluorocarbon 11, 0.56 ppb. These readings were contrasted with those taken in early February 1973 when the air was clear and marked with turbulence due to several seasonal rain storms. The readings of both fluorocarbon 1 1 and 12 averaged about 25% less during clear weather than those taken during moderate smog. The effects of weather conditions on the concentration were also dramatically pointed out by the February samples, in that as much as a tenfold change in concentrations of both fluorocarbons from location to location and from day to day at the same location was observed. A concentration versus altitude study clearly revealed that fluorocarbons are trapped by an inversion layer. Examination of air samples taken in the vicinity of factories known to be users of fairly large quantities of fluorocarbons revealed in part how large users contribute to the atmospheric concentrations of fluorocarbons. A comparison of fluorocarbon levels in homes and public buildings with ambient outside air levels revealed that the concentrations in some homes and buildings may be as much as several thousand times as high as levels in outside air. Inside the homes and public buildings, levels were as high as one-half of a part per million. Long term photolysis studies in simulated sunlight of both fluorocarbons 11 and 12 in ambient air samples and in air samples with 1 ppm of hydrocarbon and 1 ppm of nitrogen oxides revealed that the two fluorocarbons are photochemically stable even when photolyzed for several weeks.     

Spotting of Automotive Finishes from the Interactions Between Dry Deposition of Crustal Material and Wet Deposition of Sulfate

During the summer of 1988, General Motors Research Laboratories operated a mobile atmospheric research laboratory in Jacksonville, Florida to determine the cause of environmentally- related damage that occurs on automotive finishes In many parts of the U.S. The damage occurs as circular, elliptical, or irregular spots that appear as deposits or precipitates. The results of the present study show that a wetting event (rain or dew) is a prerequisite for damage to occur. Sulfuric acid contained in the rain or dew reacts on surfaces with drydeposited calcium which Is a common constituent of soli. As the droplets evaporate, a calcium sulfate precipitate forms on horizontal surfaces around the perimeter of the droplet. Subsequent washing of the surface may remove the precipitate, but on clearcoats, where the calcium sulfate was present, scars remain.     

Physical impact of waterjet‐based sediment remediation on benthic organisms

Adding activated carbon to sediments has been shown to be an effective means of reducing the bioavailability of certain contaminants. The current state of the practice is to mechanically mix activated carbon to a target concentration of 3 percent at depths of approximately 30 cm using a rotovator or similar construction equipment. Waterjets have been used to cut hard material using a mixture of water and an abrasive. If activated carbon is substituted for the abrasive, waterjets have the potential to use surface injection as a replacement for mechanical mixing during sediment remediation. A perceived benefit of waterjet‐based sediment remediation is that there may be a reduced potential for benthic organism mortality related to amendment delivery. A set of waterjet parameters were identified that have the potential to achieve amendment placement goals, and a series of waterjet tests were conducted to evaluate the potential impact on the benthic community. The tests included mortality testing using a swimming macroinvertebrate and a burrowing invertebrate, benthic artifacts such as shells, and craft foam as a surrogate for living organisms. The results indicated that the immediate survivability was typically greater than 50 percent, and that empirical relationships between two variables (waterjet nozzle diameter and the water column height between the nozzle and the target) and the depth of cut in the foam could be established. Data are not available in the literature for direct comparison of organism survivability immediately after mechanical mixing, but the results of this study provide motivation for the further evaluation of waterjets on the basis of the low observed mortality rates. Future waterjet work may address field‐scale characterization of mixing effectiveness, resuspension potential, technical feasibility, and cost. © 2011 Wiley Periodicals, Inc.     

Particle size distribution predicts particulate phosphorus removal

Particulate phosphorus (PP) is often the largest component of the total phosphorus (P) load in stormwater. Fine-resolution measurement of particle sizes allows us to investigate the mechanisms behind the removal of PP in stormwater wetlands, since the diameter of particles influences the settling velocity and the amount of sorbed P on a particle. In this paper, we present a novel method to estimate PP, where we measure and count individual particles in stormwater and use the total surface area as a proxy for PP. Our results show a strong relationship between total particle surface area and PP, which we use to put forth a simple mechanistic model of PP removal via gravitational settling of individual mineral particles, based on a continuous particle size distribution. This information can help improve the design of stormwater Best management practices to reduce PP loading in both urban and agricultural watersheds.