Removal of dinitrotoluenes from water via reduction with iron and peroxidase-catalyzed oxidative polymerization: a comparison between Arthromyces ramosus peroxidase and soybean peroxidase

A two-step process for the removal of dinitrotoluene from water is presented: zero-valent iron reduction is coupled with peroxidase-catalyzed polymerization of the resulting diaminotoluenes (DAT). The effect of pH was examined in the reduction step: at pH 6 the reaction occurred much more rapidly than at pH 8. In the second step, optimal pH and substrate ratio, minimal enzyme concentration and effect of polyethylene glycol (PEG) as an additive for greater than 95% conversion of DAT, over a 3h reaction period were determined using high performance liquid chromatography. Two enzymes were investigated and compared: Arthromyces ramosus peroxidase (ARP) and soybean peroxidase (SBP). The optimal pH values were 5.4 and 5.2 for ARP and SBP, respectively, but SBP was more resistant to mild acid whereas ARP was more stable in neutral solutions. SBP was found to have a greater hydrogen peroxide demand (optimal peroxide/DAT molar ratio for SBP: 2.0 and 3.0 for 2,4-diaminotoluene (2,4-DAT) and 2,6-diaminotoluene (2,6-DAT), respectively; for ARP: 1.5 and 2.75 for 2,4-DAT and 2,6-DAT, respectively) but required significantly less enzyme (0.01 and 0.1 U ml(-1) for 2,4-DAT and 2,6-DAT, respectively) to convert the DAT than ARP (0.4 and 1.5 U ml(-1) for 2,4-DAT and 2,6-DAT, respectively). PEG was shown to have no effect upon the degree of substrate conversion for either enzyme.     

LogD: lipophilicity for ionisable compounds

The octanol/water partition coefficient (Kow) for organic compounds is widely used in predictive environmental studies. A significant proportion of contaminants of surface and ground water are ionisable (e.g. many pesticides, pharmaceuticals, metabolites). Such compounds may be partially ionised dependent on the pH. Since the neutral and ionic species exhibit different polarities, the Kow value of ionisable pesticides is pH dependent. It is therefore essential to determine Kow values over the full range of pH that occurs in the environment in order to get appropriate predictors. Numerous methods are available to measure lipophilicity but only a few are appropriate for ionisable pesticides (e.g. pH metric and filter probe methods). Parameters such as pH and ionic strength need to be carefully controlled when working with ionisable compounds. Variation of these factors probably explains why literature can yield Kow values that differ by more than one order of magnitude for some compounds. In this article, Kow values obtained for six acidic pesticides with three different methods are compared as well (data from the literature, measured by pH metric method and calculated with five computer programs). The values used in predictive regression equations needs to be either measured with a suitable method or selected from the literature with great care.     

Levels and trends of HBCD and BDEs in the European and Asian environments, with some information for other BFRs

In this paper, we review recent data for brominated flame retardants (particularly BDEs, HBCD and TBBP-A) in samples from the European and Asian environments, including recent temporal trend studies. Research is active and we cite over 100 studies published during 2005-2007. Environmental compartments studied comprise the atmosphere, indoor and outdoor air, sewage sludges, soils and sediments and a variety of biological samples and food chains. Findings include that the lack of reference materials for use in analytical quality control and method validation identified earlier has been addressed, and certified concentrations are now available for a number of BDE congeners in six pre-existing and one new reference materials. BDE209 was certified in three samples of indoor dust. The analysis of BDE209 remains problematic, but suitable methods for its determination are available and need to be applied. The contamination of indoor environments with BFRs has been recognised as representing a significant uptake pathway, particularly via dust. Additional data for TBBP-A are needed from areas, where it is produced and used, primarily Asia, as the worst-case scenario. As a reactive flame retardant it is less likely to leach from finished products. Also, issues regarding the importance of e-waste recycling as a source of BFRs to the local populations and the local environment require urgent study, certainly in China and possibly elsewhere. Generally, trends show a levelling in concentrations of BDEs and increases in concentrations of HBCD wherever determined and BDE209 in Asia.     

How Do River Nitrate Concentrations Respond to Changes in Land-use? A Modelling Case Study of Headwaters in the River Derwent Catchment,North Yorkshire,UK

A combined semi-distributed hydrological model (CASCADE/QUESTOR) is used to evaluate the steady-state that may be achieved after changes in land-use or management and to explore what additional factors need to be considered in representing catchment processes. Two rural headwater catchments of the River Derwent (North Yorkshire, UK) were studied where significant change in land-use occurred in the 1990s and the early 2000s. Much larger increases in mean nitrate concentration (55%) were observed in the catchment with significant groundwater influence (Pickering Beck) compared with the surface water-dominated catchment (13% increase). The increases in Pickering Beck were considerably greater than could be explained by the model in terms of land-use change. Consequently, the study serves to focus attention on the long-term increases in nitrate concentration reported in major UK aquifers and the ongoing and chronic impact this trend is likely to be having on surface water concentrations. For river environments, where groundwater is a source, such trends will mask the impact of measures proposed to reduce the risk of nitrate leaching from agricultural land. Model estimates of within-channel losses account for 15–40% of nitrate entering rivers.     

Metal-contaminated potato crops and potential human health risk in Bolivian mining highlands

This study assessed metals in irrigation water, soil and potato crops impacted by mining discharges, as well as potential human health risk in the high desert near the historic mining center of Potosí, Bolivia. Metal concentrations were compared with international concentration limit guidelines. In addition, an ingested average daily dose and minimum risk level were used to determine the hazard quotient from potato consumption for adults and children. Irrigation water maximum concentrations of Cd, Pb and Zn in mining-impacted sites were elevated 20- to 1100-fold above international concentration limit guidelines. Agricultural soils contained total metal concentrations of As, Cd, Pb and Zn that exceeded concentration limits in agricultural soil guidelines by 22-, 9-, 3- and 12-fold, respectively. Potato tubers in mining-impacted sites had maximum concentrations of As, Cd, Pb and Zn that exceeded concentration limits in commercially sold vegetables by 9-, 10-, 16- and fourfold, respectively. Using conservative assumptions, hazard quotients (HQ) for potatoes alone were elevated for As, Cd and Pb among children (range 1.1–71.8), in nearly all of the mining-impacted areas; and for As and Cd among adults (range 1.2–34.2) in nearly all of the mining-impacted areas. Only one mining-impacted area had a Pb adult HQ for potatoes above 1 for adults. Toxic trace elements in a major regional dietary staple may be a greater concern than previously appreciated. Considering the multitude of other metal exposure routes in this region, it is likely that total HQ values for these metals may be substantially higher than our estimates.     

Water quality characteristics of discharge from reforested loose-dumped mine spoil in eastern Kentucky

Surface mining is a common method for extracting coal in the coal fields of eastern Kentucky. Using the Forestry Reclamation Approach (FRA), which emphasizes the use of minimally compacted or loose-dumped spoil as a growth medium for trees, reclamation practitioners are successfully reestablishing forests. Yet, questions remain regarding the effects FRA has on the quality of waters discharged to receiving streams. To examine the effect of FRA on water quality, this study compared waters that were discharged from three types of spoils: predominantly brown, weathered sandstone (BROWN); predominantly gray, unweathered sandstone (GRAY); and an equal mixture of both aforementioned sandstones and shale (MIXED). The water quality parameters pH, EC, Ca, K, Mg, Na, NO-N, NH-N, SO, Cl, TC, suspended sediment concentration (SSC), settleable solids (SS), and turbidity were monitored over a 2-yr period on six 0.4-ha plots (two replications per spoil type). Generally, levels of Cl, SO, Ca, NO-N, NH-N, SS, SSC, and turbidity decreased over time. The pH for all spoils increased from about 7.5 to 8.5. The EC remained relatively level in the BROWN spoil, whereas the GRAY and MIXED spoils had downward trajectories that were approaching 500 μS cm. The value of 500 μS cm has been reported as the apparent threshold at which certain taxa such as Ephemeroptera (e.g., Mayfly) recolonize disturbed headwater streams of eastern Kentucky and adjacent coal-producing Appalachian states.     

Insights into the dissolution and the three-dimensional structure of insensitive munitions formulations

Two compounds, 2,4-dinitroanisole (DNAN) and 3-nitro-1,2,4-triazol-5-one (NTO) are the main ingredients in a suite of explosive formulations that are being, or soon will be, fielded at military training ranges. We aim to understand the dissolution characteristics of DNAN and NTO and three insensitive muntions (IM) formulations that contain them. This information is needed to accurately predict the environmental fate of IM constituents, some of which may be toxic to people and the environment. We used Raman spectroscopy to identify the different constituents in the IM formulations and micro computed tomography to image their three-dimensional structure. These are the first three-dimensional images of detonated explosive particles.     

Apparent Photosynthesis as a Measure of Air Pollution Damage

A system has been developed to automatically measure the effects of air pollutants in the ambient air on the rate of CO₂ exchange by intact leaves of citrus trees growing in the field. A miniaturized system utilizing the same nondispersive infrared CO₂ analyzer has been designed to study individually the effects of different concentrations of air pollutants on photosynthesis and respiration by plants.