Microscale genetic differentiation in a sessile invertebrate with cloned larvae: investigating the role of polyembryony

Microscale genetic differentiation of sessile organisms can arise from restricted dispersal of sexual propagules, leading to isolation by distance, or from localised cloning. Cyclostome bryozoans offer a possible combination of both: the localised transfer of spermatozoa between mates with limited dispersal of the resulting larvae, in association with the splitting of each sexually produced embryo into many clonal copies (polyembryony). We spatially sampled 157 colonies of Crisia denticulata from subtidal rock overhangs from one shore in Devon, England at a geographic scale of ca. 0.05 to 130 m plus a further 21 colonies from Pembrokeshire, Wales as an outgroup. Analysis of molecular variance (AMOVA) revealed that the majority (67%) of genetic variation was distributed among individuals within single rock overhangs, with only 16% of variation among different overhangs within each shore and 17% of variation between the ingroup and outgroup shores. Despite local genetic variation, pairwise genetic similarity analysed by spatial autocorrelation was greatest at the smallest inter-individual distance we tested (5 cm) and remained significant and positive across generally within-overhang comparisons (<4 m). Spatial autocorrelation and AMOVA analyses both indicated that patches of C. denticulata located on different rock overhangs tended to be genetically distinct, with the switch from positive to negative autocorrelation, which is often considered to be the distance within which individuals reproduce with their close relatives or the radius of a patch, occurring at the 4–8 m distance class. Rerunning analyses with twenty data sets that only included one individual of each multilocus genotype (n = 97) or the single data set that contained just the unique genotypes (n = 67) revealed that the presence of repeat genotypes had an impact on genetic structuring (PhiPT values were reduced when shared genotypes were removed from the dataset) but that it was not great and only statistically evident at distances between individuals of 1–2 m. Comparisons to a further 20 randomisations of the data set that were performed irrespective of genotype (n = 97) suggested that this conclusion is not an artefact of reduced sample size. A resampling procedure using kinship coefficients, implemented by the software package GENCLONE gave broadly similar results but the greater statistical power allowed small but significant impacts of repeat genotypes on genetic structure to be also detected at 0.125–0.5 and 4–16 m. Although we predict that a proportion of the repeat multilocus genotypes are shared by chance, such generally within-overhang distances may represent a common distance of cloned larval dispersal. These results suggests that closely situated potential mates include a significant proportion of the available genetic diversity within a population, making it unlikely that, as previously hypothesised, the potential disadvantage of producing clonal broods through polyembryony is offset by genetic uniformity within the mating neighbourhood. We also report an error in the published primer note of Craig et al. (Mol Ecol Notes 1:281–282, 2001): loci Cd5 and Cd6 appear to be the same microsatellite. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Remediation of MTBE from drinking water: air stripping followed by off-gas adsorption

The widespread use of methyl tertiary butyl ether (MTBE) as an oxygenate in gasoline has resulted in the contamination of a large number of ground and surface water sources. Even though air stripping has been proven to be an effective treatment technology for MTBE removal, off-gas treatment often is required in conjunction with it. This study evaluated the combined treatment technologies of air stripping followed by off-gas adsorption on a pilot scale for the treatment of MTBE-contaminated water. The effect of air/water ratios on the treatment efficiency was studied, and the mass transfer coefficient was determined. Air/water ratios of 105:1, 151:1, 177:1, 190:1, 202:1, and 206:1 were used, and a treatment efficiency of >99% was achieved for all the runs conducted. The depth of packing required to achieve maximum treatment efficiency decreased with increasing air/water ratio. Relative humidity (RH) impacts on the MTBE adsorption capacity of a granular activated carbon (GAC) and carbonaceous resin were determined from pilot plant studies. Breakthrough profiles obtained from the pilot plant studies conducted at 20, 30, and 50% RH indicated that GAC has a higher adsorptive capacity than resin. The adsorptive capacity of GAC decreased with increasing RH, whereas RH did not impact the resin adsorptive capacity.     

Effects of salinity,pH and temperature on the re-establishment of bioluminescence and copper or SDS toxicity in the marine dinoflagellate Pyrocystis lunula using bioluminescence as an endpoint

Pyrocystis lunula is a unicellular, marine, photoautotrophic, bioluminescent dinoflagellate. This organism is used in the Lumitox bioassay with inhibition of bioluminescence re-establishment as the endpoint. Experiments determined if acute changes in pH, salinity, or temperature had an effect on the organisms' ability to re-establish bioluminescence, or on the bioassay's potential to detect sodium dodecyl sulfate (SDS) and copper toxicity. The re-establishment of bioluminescence itself was not very sensitive to changes in pH within the pH 6-10 range, though reducing pH from 8 to levels below 6 decreased this capacity. Increasing the pH had little effect on Cu or SDS toxicity, but decreasing the pH below 7 virtually eliminated the toxicity of either compound in the bioassay. Lowering the salinity from 33 to 27 per thousandth or less resulted in a substantial decrease in re-establishment of bioluminescence, while increasing the salinity to 43 or 48 per thousandth resulted in a small decline. Salinity had little influence on the bioassay's quantification of Cu toxicity, while the data showed a weak negative relationship between SDS toxicity and salinity. Re-establishment of bioluminescence showed a direct dependence on temperature, but only at 10 degrees C did temperature have an obvious effect on the toxicity of Cu in this bioassay.     

Hydraulic constraints on the performance of a groundwater denitrification wall for nitrate removal from shallow groundwater

Denitrification walls are a practical approach for decreasing non-point source pollution of surface waters. They are constructed by digging a trench perpendicular to groundwater flow and mixing the aquifer material with organic matter, such as sawdust, which acts as a carbon source to stimulate denitrification. For efficient functioning, walls need to be permeable to groundwater flow. We examined the functioning of a denitrification wall constructed in an aquifer consisting of coarse sands. Wells were monitored for changes in nitrate concentration as groundwater passed through the wall and soil samples were taken to measure microbial parameters inside the wall. Nitrate concentrations upstream of the wall ranged from 21 to 39 g N m(-3), in the wall from 0 to 2 g N m(-3) and downstream from 19 to 44 g N m(-3). An initial groundwater flow investigation using a salt tracer dilution technique showed that the flow through the wall was less than 4% of the flow occurring in the aquifer. Natural gradient tracer tests using bromide and Rhodamine-WT confirmed groundwater bypass under the wall. Hydraulic conductivity of 0.48 m day(-1) was measured inside the wall, whereas the surrounding aquifer had a hydraulic conductivity of 65.4 m day(-1). This indicated that during construction of the wall, hydraulic conductivity of the aquifer had been greatly reduced, so that most of the groundwater flowed under rather than through the wall. Denitrification rates measured in the center of the wall ranged from 0.020 to 0.13 g N m(-3) day(-1), which did not account for the rates of nitrate removal (0.16-0.29 g N m(-3) day(-1)) calculated from monitoring of groundwater nitrate concentrations. This suggested that the rate of denitrification was greater at the upstream face of the wall than in its center where it was limited by low nitrate concentrations. While denitrification walls can be an inexpensive tool for removing nitrate from groundwater, they may not be suitable in aquifers with coarse textured subsoils where simple inexpensive construction techniques result in major decreases in hydraulic conductivity.     

Paternity in naturally-occurring Utetheisa ornatrix (Lepidoptera : Arctiidae) as estimated using enzyme polymorphism

Paternity of offspring in natural populations of insects has received little attention due to the difficulties inherent in following females and sampling each of their mates. Here, an existing statistical technique is modified to estimate paternity based on allozyme variation found in the female and her last mate, thus allowing paternity in nature to be studied by collecting copulating pairs of insects. Using this technique, paternity was investigated in naturally-occurring females of the arctiid moth Utetheisa ornatrix. These females mate promiscuously: upon dissection, they were found to contain up to 13 spermatophores. Statistical paternity estimation revealed considerable variation in the share of offspring sired by the female's last mate: approximately 25% of the males sired all the offspring, while another 25% fathered no offspring; the remainder sired at least some offspring. The proportion of offspring sired by the last male did not correlate with latency to oviposition, the extent of previous mating by the female, or male wing length. Male U. ornatrix are known to make substantial nuptial investments during mating, and this study shows that mating males frequently sire few or no offspring. Thus, male moths stand a chance of being cuckolded.     

Forest structure and light regimes following moderate wind storms: implications for multi-cohort management.

Moderate-severity disturbances appear to be common throughout much of North America, but they have received relatively little detailed study compared to catastrophic disturbances and small gap dynamics. In this study, we examined the immediate impact of moderate-intensity wind storms on stand structure, opening sizes, and light regimes in three hemlock-hardwood forests of northeastern Wisconsin. These were compared to three stands managed by single-tree and group selection, the predominant forest management system for northern hardwoods in the region. Wind storms removed an average of 41% of the stand basal area, compared to 27% removed by uneven-aged harvests, but both disturbances removed trees from a wide range of size classes. The removal of nearly half of the large trees by wind in two old-growth stands caused partial retrogression to mature forest structure, which has been hypothesized to be a major disturbance pathway in the region. Wind storms resulted in residual stand conditions that were much more heterogeneous than in managed stands. Gap sizes ranged from less than 10 m2 up to 5000 m2 in wind-disturbed stands, whereas the largest opening observed in managed stands was only 200 m2. Wind-disturbed stands had, on average, double the available solar radiation at the forest floor compared to managed stands. Solar radiation levels were also more heterogeneous in wind-disturbed stands, with six times more variability at small scales (0.1225 ha) and 15 times more variability at the whole-stand level. Modification of uneven-aged management regimes to include occasional harvests of variable intensity and spatial pattern may help avoid the decline in species diversity that tends to occur after many decades of conventional uneven-aged management. At the same time, a multi-cohort system with these properties would retain a high degree of average crown cover, promote structural heterogeneity typical of old-growth forests, and maintain dominance by late-successional species.     

Environmental News in Argentina, Chile, Mexico and the Philippines

From an environmental perspective, the media have raised the level of environmental awareness and, rightly or wrongly, focused the attention of citizens on specific environmental issues. Public reaction to environmental news can filter back into the media and highlight specific policy issues. The importance of the media in this respect has gained strength, particularly in developing countries, where environmental problems have become legitimate concerns, and where access to 'official' information has been historically difficult. In general, newspapers have been found to be one of the most predominant sources of environmental information available to the public, particularly in developing countries. In this paper, we summarise, briefly analyse and compare the newspaper coverage of environmental issues in Argentina, Chile, Mexico and the Philippines. Among numerous other results, it appears that the coverage of environmental issues fell considerably over the period 1990-94 despite an increase in world-wide environmental awareness. Most news reports actions by the environmental agencies (warnings and rewards, etc.). In the Philippines, however, most environmental news reports investments in pollution abatement activities by the private sector. While citizens' complaints represent a small percentage of the coverage of environmental issues, closer examination reveals that such complaints, in the vast majority of cases, trigger governmental actions (warnings) and ultimately an improvement of firms' environmental performance (investment).     

Gametogenic periodicity in the chemosynthetic cold-seep mussel “<Emphasis Type="Italic">Bathymodiolus” childressi</Emphasis>

The gametogenic periodicity of the cold seep mussel “Bathymodiolus” childressi was analysed from a time series of samples from depths of ∼ 650 m surrounding the Brine Pool cold seep on the continental slope of the northern Gulf of Mexico. Occasional samples were retrieved from Bush Hill and GC 234 for comparison. At the Brine Pool, both females and males showed strong reproductive periodicity with the initiation of gametogenesis from December to March, followed by a period of gamete growth or proliferation and spawning from October to February. Gametogenesis was synchronized at all three sites. Gametogenic periodicity appears to be correlated with surface production that peaks during the winter months. Downward flux of detritus during this period may provide food for the planktotrophic larvae and also supplementary nutrition for the adult, which has chemosynthetic bacterial symbionts but is also capable of filter feeding. Individuals in all three populations carried parasites and these were especially common at Bush Hill and GC234, where it is suggested they have a major impact on reproductive output.     

Quantification of steroid sex hormones using solid-phase extraction followed by liquid chromatography-mass spectrometry.

In this study, the occurrence of trace amounts of natural and synthetic steroid estrogens in the aquatic environment was studied using liquid chromatography coupled with electrospray mass spectrometry, following solid-phase extraction (SPE). The SPE was performed with C18 and NH2 cartridges. The first objective was to develop a reliable method for analyzing steroid estrogens (resulting from human and animal excretions) in different matrices. The method developed was then applied to quantify the occurrence of natural and synthetic hormones (estrone [E1], 17beta-estradiol [betaE2], 17alpha-estradiol [alphaE2], estriol [E3], and 17alpha-ethinylestradiol [EE2]) in environmental samples in surface water and wastewater treatment plant (WWTP) influent and effluent. In the WWTP influents, betaE2, alphaE2, and E3 were identified as ranging up to 72.6 ng/L in WWTP influent and to 16 ng/L in WWTP effluent. Analysis o f surface wa ter sampled upstream from the WWTP revealed the presence of all five estrogens, at levels up to 19.8 ng/L. These concentrations of estrogens pose an issue for large and small communities, because they are higher than the recommended guidelines for estrogen-active compounds and because a lot of communities use surface water as drinking-water sources.