Hydrocarbon emissions speciation in diesel and biodiesel exhausts

Diesel engine emissions are composed of a long list of organic compounds, ranging from C₂ to C₁₂₊, and coming from the hydrocarbons partially oxidized in combustion or produced by pyrolisis. Many of these are considered as ozone precursors in the atmosphere, since they can interact with nitrogen oxides to produce ozone under atmospheric conditions in the presence of sunlight. In addition to problematic ozone production, Brookes, P., and Duncan, M. [1971. Carcinogenic hydrocarbons and human cells in culture. Nature.] and Heywood, J. [1988. Internal Combustion Engine Fundamentals.Mc Graw-Hill, ISBN 0-07-1000499-8.] determined that the polycyclic aromatic hydrocarbons present in exhaust gases are dangerous to human health, being highly carcinogenic.The aim of this study was to identify by means of gas chromatography the amount of each hydrocarbon species present in the exhaust gases of diesel engines operating with different biodiesel blends. The levels of reactive and non-reactive hydrocarbons present in diesel engine exhaust gases powered by different biodiesel fuel blends were also analyzed.Detailed speciation revealed a drastic change in the nature and quantity of semi-volatile compounds when biodiesel fuels are employed, the most affected being the aromatic compounds. Both aromatic and oxygenated aromatic compounds were found in biodiesel exhaust. Finally, the conservation of species for off-side analysis and the possible influence of engine operating conditions on the chemical characterization of the semi-volatile compound phase are discussed.The use of oxygenated fuel blends shows a reduction in the Engine-Out emissions of total hydrocarbons. But the potential of the hydrocarbon emissions is more dependent on the compositions of these hydrocarbons in the Engine-Out, to the quantity; a large percent of hydrocarbons existing in the exhaust, when biodiesel blends are used, are partially burned hydrocarbons, and are interesting as they have the maximum reactivity, but with the use of pure biodiesel and diesel, the most hydrocarbons are from unburned fuel and they have a less reactivity. The best composition in the fuel, for the control of the hydrocarbon emissions reactivity, needs to be a fuel with high-saturated fatty acid content.     

White clover clones as a cost-effective indicator of phytotoxic ozone: 10 years of experience from central Italy

Data collected at one site in central Italy using the NC-S/NC-R clover (Trifolium repens) biotype system during 1997-2007 were analysed in order to assess: (a) its performance under Mediterranean conditions; (b) variations of ozone damage linked with meteorological conditions; (c) if critical level approach is a good predictor of ozone risk on vegetation. NC-S dry biomasses were systematically lower than those of NC-R, the mean ratio being 0.7. Relevant relationship between ozone visible injury and cumulated values of AOT40 were also reported. Temperature and number of rainy days were the most important factors associated with ozone presence and, as a consequence, with leaf injury index. Photosynthetic gas exchange properties indicate that NC-S has higher values of stomatal conductance.     

Intensive Livestock Farming: Global Trends, Increased Environmental Concerns, and Ethical Solutions

By 2050, global livestock production is expected to double—growing faster than any other agricultural sub-sector—with most of this increase taking place in the developing world. As the United Nation’s four-hundred-page report, Livestock’s Long Shadow: Environmental Issues and Options, documents, livestock production is now one of three most significant contributors to environmental problems, leading to increased greenhouse gas emissions, land degradation, water pollution, and increased health problems. The paper draws on the UN report as well as a flurry of other recently published studies in order to demonstrate the effect of intensive livestock production on global warming and on people’s health. The paper’s goal is to outline the problems caused by intensive livestock farming and analyze a number of possible solutions, including legislative changes and stricter regulations, community mobilizing, and consumers choosing to decrease their demand for animal products.     

A fuzzy multi-attribute model for risk evaluation in workplaces

Risk assessment constitutes a critical phase of the safety management process. It basically consists of evaluating the risks involved in the execution of working activities, so as to provide the managers with information suitable to address intervention measures. The most important activity in risk assessment is the risk evaluation task but, despite its importance, national and international regulations have never formalized a standard methodology for addressing it, leaving companies complete freedom to adopt the approach they consider appropriate. As a consequence, companies generally settle on the use of simple methodologies which frequently are not able to emphasize all the main aspects affecting risk in the workplace and to produce a precise ranking of hazardous activities. In this paper, a new methodology for risk evaluation is then proposed with the aim to overcome limitations of the classical approaches. In particular, new factors are introduced to take into account effects of human behavior and environment on risk level, other than the classical injury magnitude and occurrence probability of an accident. The proposed methodology also integrates an estimative approach based on the fuzzy logic theory, which permits more coherence in the evaluation process, producing a very suitable final rank of hazardous activities. Finally, an actual case study is reported to show the capabilities of the new risk evaluation model.     

Lettuce plants as bioaccumulators of trace elements in a community of central Italy

A survey, based on the use of vascular plants to describe the distribution of selected elements (21 in total) was performed in 11 sites in the area of Castelfiorentino (Tuscany, Central Italy) differing for land use, from urban to industrial and rural areas. Lettuce plants grown under standardized conditions were positively used as biodeposimeters of airborne trace elements. Washing was found to be highly significant in reducing concentrations of many elements in the samples, suggesting a general surface contamination of leaves. The typical crustal element Al showed good correlations with Co, Fe, Li and V; on the contrary, Zn and Cd were intercorrelated and showed no connection with crustal indicators. Lead was still a relevant environmental presence, as the experiments were carried out before the ban of leaded gasoline. Source apportionment by factor analysis put in evidence a major contribution of crustal materials, followed by man-related activities; a minor role was ascertained for marine aerosol. A comparison was made between analytical data of lettuce plants grown in our experimental sites and a bulk of commercial lettuce purchased at a local supermarket. It should be stressed how Cu concentrations of commercial material were significantly higher than those found in our plants; this is likely caused by phytosanitary treatments.     

Estimation of pollutant partition in sandy soils with different water contents

The objectives of this work were: (1) to identify an isotherm model to relate the contaminant contents in the gas phase with those in the solid and non-aqueous liquid phases; (2) to develop a methodology for the estimation of the contaminant distribution in the different phases of the soil; and (3) to evaluate the influence of soil water content on the contaminant distribution in soil. For sandy soils with negligible contents of clay and natural organic matter, contaminated with benzene, toluene, ethylbenzene, xylene, trichloroethylene (TCE), and perchloroethylene (PCE), it was concluded that: (1) Freundlich’s model showed to be adequate to relate the contaminant contents in the gas phase with those in the solid and non-aqueous liquid phases; (2) the distribution of the contaminants in the different phases present in the soil could be estimated with differences lower than 10% for 83% of the cases; and (3) an increase of the soil water content led to a decrease of the amount of contaminant in the solid and non-aqueous liquid phases, increasing the amount in the other phases.     

Revisiting the plant hyperaccumulation criteria to rare plants and earth abundant elements

The several established criteria to define a hyperaccumulator plant were applied to a rare and endangered species, Plantago almogravensis, and to the 3rd most abundant element in the earth crust, Al. Using the most common criteria, P. almogravensis undoubtedly is an Al hyperaccumulator plant. If the recent proposed requirements were considered, most of them matching those for a plant to be used in phytoextraction, it can only be considered an unusual accumulator of Al. A discussion is made concerning the several criteria of a hyperaccumulator plant in order to include rare and endemic ones and abundant elements. In ecological terms, the enrichment in Al and Fe observed may account for the differences in the vegetation pattern. Due to the rarity and endangered nature of this plant, the contribution of this work is also relevant for the ecological understanding and the development of conservation options of this endemic species.     

Development of a test method against hot alkaline chemical splashes.

High temperature alkaline chemical liquids have caused injuries and hazardous situations in Finnish pulp manufacturing mills. There are no requirements and/or test method standards concerning protection against high temperature alkaline chemical splashes. This paper describes the test method development process to test and identify materials appropriate for hot liquid chemical hazard protection. In the first phase, the liquid was spilled through a stainless steel funnel and the protection performance was evaluated using a polyvinyl chloride (PVC) film under the test material. After several tentative improvements, a graphite crucible was used for heating and spilling the chemical, and a copper-coated K-type thermometer with 4 independent measuring areas was designed to measure the temperature under the material samples. The thermometer was designed to respond quickly so that peak temperatures could be measured. The main problem was to keep the spilled amount of chemical constant, which unfortunately resulted in significant variability in data.