动态浸出模拟实验系统与静态浸出试验的对比

建立了动态浸出试验－－小柱模拟实验系统,研究在非饱和水条件下危险物质在填埋场中的迁移和浸出规律,并和静肪浸出实验进行比较,结果表明,在非饱和入渗条件下危险物质的浸出浓度要比静态浸出实验的结果小１００倍左右,危险发的浸出速率也远小于静实验的结果,同时,危险物质的浸出速率随废物层饮水度的增加而迅速增加。     

新型改性聚丙烯酰胺的合成及对污泥调理效果的研究

采用原位聚合法,在聚丙烯酰胺的聚合过程中引入金属离子进行改性,合成了一种新型改性聚丙烯酰胺.通过正交实验确定了改性聚丙烯酰胺的最佳合成条件.红外图谱显示,该聚丙烯酰胺是一种具有特殊结构的有机高分子化合物.以污泥脱水率和污泥比阻为考察指标,研究了改性聚丙烯酰胺对污水处理厂剩余活性污泥脱水性能的影响,结果表明,在每1000...     

企业安全文化建设的哲学思考

从马克思主义哲学的角度，论述了建设企业安全文化是符合职工群众意愿的大事，必须以实践为基础，坚持辩证统一的观点、联系和发展的观点。以联系工厂实践，说明企业安全文化建设的哲学原理     

Decomposition and oxidation of sodium 3,5,6-trichloropyridin-2-ol in sub- and supercritical water

Sodium 3,5,6-trichloropyridin-2-ol (STCP) is a necessary precursor compound for the production of chlorpyrifos and triclopyr, which are extensively used as pesticide and herbicide, respectively. In the process of STCP production, however, large amount of wastewater containing STCP is discharged, which causes increasingly environmental concerns. Therefore, it is of great significance to develop a rapid and effective method for the disposal of containing STCP contaminants. In this work, the thermal decomposition of STCP in sub- and supercritical water was investigated using a continuous tubular reactor. While STCP was stable below 280 °C, it could be effectively decomposed at elevated temperature. FT-IR spectra of the decomposition products indicated that the pyridine ring structure in the STCP molecule was stable even at temperatures up to 400 °C. The decomposition reaction was mainly caused by the substitution of Cl groups in the STCP molecule with OH groups, resulting in polyhydroxylated pyridines as the major decomposition product. Moreover, high pressure favored the substitution reaction. To completely decompose STCP into non-toxic or low toxic compounds, supercritical water oxidation (SCWO) was employed to evaluate the oxidation of STCP using H₂O₂ as an oxidant. It was found that STCP could be completely oxidized to H₂O, CO₂ and corresponding inorganic ammonium salts with an oxidation rate of 99%.     

低浓度含砷污酸处理工艺的比较研究

比较研究了石灰中和法和石灰-铁盐法对硫化后含低浓度砷(20～50 mg/L)污酸的处理效果。结果表明,单纯采用石灰法,废水难以达标排放;而两段石灰-铁盐(氯化铁)法满足达标排放的同时,一段及二段沉淀物的浸出液中砷、镉、铜、铅和锌含量均低于危险废物鉴别标准要求(GB 5085.3-2007);其最优工艺参数为一段终了pH=2,反应时间为2 h,二段终了pH=8、Fe/As=8、反应时间为60 min、氧化剂投加量(Ca(ClO)2/As)为6∶1;正交实验结果中各参数对铁盐除砷效果影响顺序为终了pH>反应时间>Fe/As>氧化剂投加量。     

富马酸生产废水的资源化研究

用PCW-7-甲苯络合萃取剂处理富马酸废水,萃取液用碱液反萃回收,每立方米废水可回收9kg富马酸,其含量大于97％。研究了影响萃取效果的相关因素．确定了适宜的工艺条件。     

昆虫病毒增效蛋白的研究进展

杆状病毒是专化性很强的一类双链ＤＮＡ病毒,主要感染无脊椎动物,特别是鳞翅目昆虫．杆状病毒科又分为３个亚组：核型多角体病毒ＮＰＶ（Ｎｕｃｌｅａｒｐｏｌｙｈｅｄｒｏｓｉｓｖｉｒｕｓ）、颗粒体病毒ＧＶ（Ｇｒａｎｕｌｏｓｉｓｖｉｒｕｓ）和非包涵体型杆状病毒（...     

Reutilize tire in microbial fuel cell for enhancing the nitrogen removal of the anammox process coupled with iron-carbon micro-electrolysis

• MFC promoted the nitrogen removal of anammox with Fe-C micro-electrolysis. • Reutilize pyrolysis waste tire as micro-electrolysis and electrode materials. • Total nitrogen removal efficiency of modified MFC increased to 85.00%. • Candidatus kuenenia and SM1A02 were major genera responsible for nitrogen removal. In this study, microbial fuel cells (MFCs) were explored to promote the nitrogen removal performance of combined anaerobic ammonium oxidation (anammox) and Fe-C micro-electrolysis (CAE) systems. The average total nitrogen (TN) removal efficiency of the modified MFC system was 85.00%, while that of the anammox system was 62.16%. Additionally, the effective operation time of this system increased from six (CAE system alone) to over 50 days, significantly promoting TN removal. The enhanced performance could be attributed to the electron transferred from the anode to the cathode, which aided in reducing nitrate/nitrite in denitrification. The H⁺ released through the proton exchange membrane caused a decrease in the pH, facilitating Fe corrosion. The pyrolyzed waste tire used as the cathode could immobilize microorganisms, enhance electron transport, and produce a natural Fe-C micro-electrolysis system. According to the microbial community analysis, Candidatus kuenenia was the major genus involved in the anammox process. Furthermore, the SM1A02 genus exhibited the highest abundance and was enriched the fastest, and could be a novel potential strain that aids the anammox process.     

模拟含铀废液的除铀方法与效果

受天然铀矿物形成条件的启发,通过改变含铀废液的物理化学条件,即能在含铀废液中形成较稳定沥青铀矿或者其他沉淀物,实现除铀目的。这种除铀方法被定义为沥青铀矿结晶法。在不同的物理化学条件下采用此方法处理了含铀废液,其结果表明,升高温度、降低Eh,除铀速度加快,除铀效率提高,其中,在物理化学条件为T=85℃、pH=3、Eh=+61.1 mV时,铀元素以沥青铀矿的形式从溶液中析出,除铀率高达99.6%,效果良好。     

基于粒度分布的活性污泥胞外聚合物提取及凝聚特性分析

胞外聚合物(EPS)在活性污泥的凝聚及结构方面起着重要的作用。现有研究一般根据分离难易程度及空间分布,将EPS分为溶解型EPS(SEPS),松散结合型EPS(LB-EPS)和紧密结合型EPS(TB-EPS)。本研究提出了根据EPS功能进行分类的概念,将EPS分为絮体EPS(extra-microcolony polymeric substances,EMPS)和菌胶团EPS(extra-cellular polymeric substances,ECPS)。以活性污泥粒度分布的演变为基础,采用阳离子交换树脂法作为一次提取法,甲醛加碱法和超声-高速离心法2种方法分别作为二次提取法,对EMPS和ECPS进行分离提取,并对其功能及凝聚特性进行分析。结果显示,阳离子交换树脂法可有效提取EMPS,而超声-高速离心法可有效提取ECPS。ECPS比EMPS含有更多的蛋白质和多糖,且ECPS比EMPS具有更强的疏水性。此外,EMPS和ECPS都表现出较强的带负电特性。结果表明,活性污泥絮体层级和菌胶团层级的聚合力不同,絮体层级的絮凝主要由二价阳离子的桥联作用引起,而菌胶团层级的凝聚则是由疏水作用等其他作用力引起。