Effects of atmospheric ammonia on vegetation--a review

Atmospheric ammonia does not only cause acute injuries at vegetation close to the source, but significantly contributes to large scale nitrogen eutrophication and acidification of ecosystems because the amount of sources is high and after conversion to ammonium it can reach remote areas by long-range atmospheric transport. Besides having acute toxic potential, NH(3) and NH(4)(+) (= NH(y)) may disturb vegetation by secondary metabolic changes due to increased NH(y) uptake and assimilation leading to higher susceptibility to abiotic (drought, frost) and biotic (pests) stress. Prevention of damage to natural and semi-natural ecosystems will only be achieved if NH(3) emissions are drastically reduced. In this paper, the current knowledge on NH(y) emission, deposition, and its effects on vegetation and ecosystems are reviewed. Critical levels and critical loads for nitrogen deposition are discussed.     

Spectroscopic Analysis of NIR-Dye Sensitization in Bulk Heterojunction Polymer Solar Cells

The photovoltaic conversion efficiency for near-infrared (NIR) sunlight is improved successfully by dye sensitization of bulk heterojunction polymer solar cells, in which the active layer was prepared by a ternary blend of poly(3-hexylthiophene), a fullerene derivative (1-(3-methoxycarbonyl)propyl-1-phenyl-[6,6]-methanofullerene), and an NIR dye, silicon phthalocyanine bis(trihexylsilyl oxide). The mechanism of the NIR-dye sensitization is studied by femtosecond transient absorption spectroscopy.     

Lost benefits and carbon uptake by protection of Indian plantations

There is a range of problems in assessing how protection of a specific forest to Reduce Emissions from Deforestation and forest Degradation (REDD+) affect global emissions of greenhouse gases. This paper shows how knowledge and information about the biophysical characteristics of forests can be combined with theories of forest management and economic behaviour to derive the impacts on global emissions of REDD+. A modelling experiment from India, where 10% of the forest plantations in eight different regions are protected, shows that the biophysical characteristics of forests are decisive for the global impacts on emissions. In regions with slow-growing forests, agents in the non-protected forests are able to increase their output significantly to fill the demand from the protected forests. This opportunity is strictly limited in regions with fast-growing forests. Therefore, prices increase far more in regions with fast-growing forests than in slow-growing forests. Over time, the markets for Indian forestry products contribute to reduce the resulting price differences across regions. When the carbon uptake from protected forests approaches zero, the leakage of emissions to other Indian forests is between 20 and 40%. Only a small part of this is international leakage. Combining different models also helps to identify knowledge gaps, and to distinguish gaps that potentially may be filled with data and new knowledge, and gaps due to different angling of modelling biophysical processes and modelling of economic behaviour.     

Improving eco-efficiency in the steel industry: The ArcelorMittal Gent case

In addition to CO₂ released by the combustion of fossil fuel and leading to climate change, large steelworks emit pollutants that have other environmental impacts. ArcelorMittal Gent, an integrated steelwork producing ca. 5 × 10⁶ tons of steel per year, not only decreased its specific energy consumption and CO₂-emissions, but also reduced the environmental impact of its other emissions. This is illustrated by means of the evolution of 6 partial eco-efficiency indicators for the impact categories acidification, photo-oxidant formation, human toxicity, freshwater aquatic ecotoxicity, eutrophication and water use. The partial eco-efficiency indicators are eco-intensities, defined as the environmental impact in the respective impact category, divided by the amount of liquid steel produced. In the period 1995 – 2005 these indicators decreased by 45, 4, 52, 9, 11 and 33% respectively, whereas the steel production increased by 17%. The net impact of discharges of wastewater is negligible for human toxicity and is negative (concentrations lower than in the canal water used) for freshwater aquatic toxicity and eutrophication. For acidification, human toxicity (only emissions to air) and water use, the decoupling between environmental impact and production was absolute; for photo-oxidant formation, freshwater aquatic ecotoxicity (only emissions to air) and eutrophication, it was relative.     

Framing adaptation to climate-related extreme events

Whilst mitigation has dominated policy and research agendas in recent years there is an increasing recognition that communities also need to be preparing for change that is unavoidable, partially a consequence of anthropogenic greenhouse gases already emitted to the atmosphere. The perceived need for adaptation has also received additional impetus through the high public profile now given to the impacts of current day weather variability, particularly the significant economic and social costs associated with recent extreme events. However, being a relatively new focus for both research and policy communities; practical evidence of the extent, feasibility, efficiency, and cost effectiveness of potential adaptation options remains largely lacking. In response, this paper seeks to make a contribution to this embryonic but evolving knowledge base by considering the theoretical underpinnings of adaptation and ultimately how this translates into practice ‘in the real world’. The analytical commentary, based on a bottom-up approach involving iterative engagement with key stakeholders and experts, reflects on the identification of measures that are either innovative or examples of good practice in reducing or transferring climate risks, as well as considering those ‘enabling’ institutional structures and processes that act to support implementation on the ground. The paper concludes by synthesising the key findings to date in order to highlight some of the opportunities for, and barriers to, adaptation activity.     

An estimated 400–800 million tons of prey are annually killed by the global spider community

Spiders have been suspected to be one of the most important groups of natural enemies of insects worldwide. To document the impact of the global spider community as insect predators, we present estimates of the biomass of annually killed insect prey. Our estimates assessed with two different methods suggest that the annual prey kill of the global spider community is in the range of 400–800 million metric tons (fresh weight), with insects and collembolans composing >90% of the captured prey. This equals approximately 1‰ of the global terrestrial net primary production. Spiders associated with forests and grasslands account for >95% of the annual prey kill of the global spider community, whereas spiders in other habitats are rather insignificant contributors over a full year. The spider communities associated with annual crops contribute less than 2% to the global annual prey kill. This, however, can be partly explained by the fact that annual crop fields are “disturbed habitats” with a low buildup of spider biomass and that agrobiont spiders often only kill prey over short time periods in a year. Our estimates are supported by the published results of exclusion experiments, showing that the number of herbivorous/detritivorous insects and collembolans increased significantly after spider removal from experimental plots. The presented estimates of the global annual prey kill and the relative contribution of spider predation in different biomes improve the general understanding of spider ecology and provide a first assessment of the global impact of this very important predator group.     

Hummingbird with modern feathering: an exceptionally well-preserved Oligocene fossil from southern France

Hummingbirds (Trochilidae) today have an exclusively New World distribution, but their pre-Pleistocene fossil record comes from Europe only. In this study, we describe an exceptionally preserved fossil hummingbird from the early Oligocene of southeastern France. The specimen is articulated, with a completely preserved beak and feathering. Osteological characters allow to identify it as Eurotrochilus sp. This genus is a stem group representative of Trochilidae and was recently described from the early Oligocene of southern Germany. The new fossil reveals that these European Trochilidae were remarkably modern in size, skeletal proportions and the shape of the wing, tail and beak and hyoid bones. These features confirm the early acquisition of the abilities of hovering and nectarivory in hummingbirds, probably before the Oligocene. In several morphological characteristics, they resemble members of the 'true hummingbirds' (subfamily Trochilinae) and differ from hermits (Phaethornithinae). These features, which include a short and square tail and a moderately long, almost straight beak, appear to be primitive within the family Trochilidae.     

Redox processes in water remediation

Groundwater is the main source of drinking water and water for agricultural and industrial usage. Therefore, groundwater contamination is prevented and contaminated groundwater is remediated to protect public health and the environment. Methods to remediate groundwater contamination have been recently developed. The use of redox processes in water remediation technologies has not been properly reviewed. Numerous water remediation technologies, such as ultrasonication, bioremediation, electrokinetics and nanotechnology, are closely related to redox processes. Redox processes control the chemical speciation, bioavailability, toxicity, mobility and adsorption of water pollutants in environment. Here, we review (1) general introduction of redox processes, (2) applicability of redox processes in water remediation, and (3) catalytic enhancement of redox potentials to explore its wide applicability in environmental remediation.     

Feeding behavior of adult <Emphasis Type="Italic">Vinciguerria nimbaria</Emphasis> (Phosichthyidae), in the tropical Atlantic (0°–4°N, 15°W)

Adult Vinciguerria nimbaria are the main prey of tuna during the tuna fishing season (late autumn and winter) in the equatorial Atlantic (0–4°N, and ~15°W). V. nimbaria trophic behavior in the fishing grounds was studied in relation to hydrobiological factors to determine its role in the trophic food web. Sampling stations spaced by 20 nautical miles were set up along a 15°W north–south transect from 4°N to 0°40S. At each station, the temperature and vertical fluorescence profiles were recorded. Nitrate and chlorophyll a analyses were performed on water sampled at different levels in the euphotic zone. Vertical plankton hauls were carried out at depths of 0–100 and 0–200 m using a standard WP2 net fitted with a 200-μm mesh gauze. Vinciguerria nimbaria adults were collected using a young-fish mid-water trawl net (10 × 15 m opening mouth, 10 mm cod end mesh). The weight of the stomach contents, the stomach fullness index, the number of prey, the frequency of occurrence and the prey preponderance were recorded for 20 fish from each haul. An oligotrophic typical tropical structure (TTS) was found between 1° and 4°N where small zooplankton was relatively abundant above or near the thermocline. In the TTS, V. nimbaria behaved as an epipelagic fish, feeding on the dominant small prey during the daytime. In turn, it was a prey for tuna. In the equatorial zone, where zooplankton was more abundant than in the north equatorial zone, V. nimbaria behaved as a mesopelagic fish and as an opportunistic mesozooplankton feeder. It consumed a wide range of sizes of food, feeding on the most abundant species of zooplankton as well as the largest zooplankton species, possibly while migrating towards the surface in the late afternoon or in the deep layer.