Production of lightweight aggregate from industrial waste and carbon dioxide

The concomitant recycling of waste and carbon dioxide emissions is the subject of developing technology designed to close the industrial process loop and facilitate the bulk-re-use of waste in, for example, construction. The present work discusses a treatment step that employs accelerated carbonation to convert gaseous carbon dioxide into solid calcium carbonate through a reaction with industrial thermal residues. Treatment by accelerated carbonation enabled a synthetic aggregate to be made from thermal residues and waste quarry fines. The aggregates produced had a bulk density below 1000 kg/m³ and a high water absorption capacity. Aggregate crushing strengths were between 30% and 90% stronger than the proprietary lightweight expanded clay aggregate available in the UK. Cast concrete blocks containing the carbonated aggregate achieve compressive strengths of 24 MPa, making them suitable for use with concrete exposed to non-aggressive service environments. The energy intensive firing and sintering processes traditionally required to produce lightweight aggregates can now be augmented by a cold-bonding, low energy method that contributes to the reduction of green house gases to the atmosphere.     

The influence of temperature on the deactivation of commercial Pd/Rh automotive catalysts

Automotive catalyst deactivation can be promoted by thermal and poisoning mechanisms. Catalyst efficiency is reduced by thermal degradation resulting in the agglomeration of precious metals and the reduction of the washcoat surface area. In this paper, the temperature influence on the commercial Pd/Rh-based automotive catalyst performance was studied. Textural and physicochemical characterisation techniques were employed, such as X-ray fluorescence (XRF), atomic absorption spectrometry (AAS), N₂ physisorption, X-ray diffraction (XRD), temperature programmed reduction (TPR) and scanning electron microscopy coupled with energy-dispersive X-ray analysis (SEM–EDX). The catalysts were evaluated for CO and propane oxidation with a stoichiometric gas mixture similar to engine exhaust gas. The results indicated the transformation of alumina into high temperature phases and the formation of new mixed oxide phases. Evidence of sintered particles and several spots of palladium agglomerates was seen by SEM–EDX analysis. The activity results showed the effects of thermal deactivation on the conversion of the pollutants. In spite of exposure to extreme temperature conditions (72 h at 1200 °C), significant activity was still observed for carbon monoxide and propane oxidation reactions.     

Recently planted vegetation strips reduce Giardia runoff reaching waterways

Current methods for tracking pathogens across farmland and into surrounding waterways via runoff are limited and typically have been developed using artificially created landscapes. No studies have investigated how Giardia in farm runoff moves across the landscape, despite high prevalence rates in dairy cattle (Bos taurus) worldwide. Here, we report the development of a field-based tracking method specific for Giardia movement in runoff and use this technique to compare the pathogen reduction capability of recently planted vegetation strips with bare soil strips cleared of vegetation. Such scenarios represent typical events in schemes to plant vegetation barriers aimed at reducing waterway contamination. A significant treatment effect was identified, with 26% fewer Giardia detected in runoff collected from the planted strip (P = 0.006). These results highlight the immediate benefit of pathogen removal to be gained from vegetation planting. The successful discrimination of treatment effects by this new technique will enable the assessment of different vegetation types on runoff reduction and the effects of plant development over time.     

Sustainable engineering education in the United States

Sustainable engineering is a conceptual and practical challenge to all engineering disciplines. Although the profession has experience with environmental dimensions of engineering activities that in some cases are quite deep, extending the existing body of practice to sustainable engineering by including social and cultural domains is a significant and non-trivial challenge. Nonetheless, progress is being made, as a recent study undertaken by the Center for Sustainable Engineering in the United States demonstrates.

Survey of arsenic and its speciation in rice products such as breakfast cereals, rice crackers and Japanese rice condiments

Rice has been demonstrated to be one of the major contributors to arsenic (As) in human diets in addition to drinking water, but little is known about rice products as an additional source of As exposure. Rice products were analyzed for total As and a subset of samples were measured for arsenic speciation using high performance liquid chromatography interfaced with inductively coupled plasma-mass spectrometry (HPLC-ICP-MS). A wide range of rice products had total and inorganic arsenic levels that typified those found in rice grain including, crisped rice, puffed rice, rice crackers, rice noodles and a range of Japanese rice condiments as well as rice products targeted at the macrobiotic, vegan, lactose intolerant and gluten intolerance food market. Most As in rice products are inorganic As (75.2-90.1%). This study provides a wider appreciation of how inorganic arsenic derived from rice products enters the human diet.     

TQM and the cost of environmental quality

Because management is driven largely by financial concerns, determining the cost of environmental quality is a critical step in developing an environmental TQM program for which management will actively demonstrate commitment and support. Costs of environmental quality can be grouped into three categories: failure, prevention, and appraisal. The total cost of environmental quality can be used as a benchmark to monitor the level of environmental quality and to justify the redirection of resources.     

夏季长三角地区臭氧非线性响应曲面模型的建立及应用

2013年8月上旬,长三角地区发生了一次大范围高浓度臭氧污染事件.本研究基于WRF-CMAQ空气质量模型系统,结合长三角地区大气污染物排放清单,构建了臭氧与其前体物之间的非线性响应曲面模型(Response surface modeling,RSM).基于RSM探讨了长三角地区O_3化学的敏感性特征,分析了上海市O_3的来源并预测不同情景下O_3的变化,提出O_3污染的最优控制方案.研究结果表明,长三角地区夏季O3主控因素区域差别较大,上海环科院、杭州卧龙桥、南京玄武湖等城区点位属于VOC控制型;徐州铜山、合肥肥西、丽水青田等郊区属于NOx控制型.O_3的敏感性特征在不同浓度水平下也呈现较大差异,随着O_3浓度水平的升高,各地区NOx敏感性均有所增加.从区域来源来看,远距离传输对平日上海O_3贡献较大,占50%以上;而在O_3污染日,本地及区域贡献为72.1%,而远距离传输贡献下降至27.9%.快速预测了110组减排情景,表明在本地及区域前体物均减排70%的情况下,2013年8月上海O_3浓度能完全达标.