Sustainable land application: an overview

Man has land-applied societal nonhazardous wastes for centuries as a means of disposal and to improve the soil via the recycling of nutrients and the addition of organic matter. Nonhazardous wastes include a vast array of materials, including manures, biosolids, composts, wastewater effluents, food-processing wastes, industrial by-products; these are collectively referred to herein as residuals. Because of economic restraints and environmental concerns about land-filling and incineration, interest in land application continues to grow. A major lesson that has been learned, however, is that the traditional definition of land application that emphasizes applying residuals to land in a manner that protects human and animal health, safeguards soil and water resources, and maintains long-term ecosystem quality is incomplete unless the earning of public trust in the practices is included. This overview provides an introduction to a subset of papers and posters presented at the conference, "Sustainable Land Application," held in Orlando, FL, in January 2004. The USEPA, USDA, and multiple national and state organizations with interest in, and/or responsibilities for, ensuring the sustainability of the practice sponsored the conference. The overriding conference objectives were to highlight significant developments in land treatment theory and practice, and to identify future research needs to address critical gaps in the knowledge base that must be addressed to ensure sustainable land application of residuals.     

The effect of Na and Ca salts on MSWI bottom ash activation for reuse as a pozzolanic admixture

In this study the possibility of both chemical and combined chemical + thermal activation of municipal solid waste incinerator bottom ash was investigated. A number of chemical activators including Na₂SiO₃·9H₂O, NaOH, Na₂SO₄ and CaCl₂·2H₂O were individually added at varying concentrations to bottom ash/Portland cement mixtures having different bottom ash contents. The effect of the selected compounds was evaluated in terms of macroscopic properties including mechanical strength and composition of cementitious materials/water slurries. The results showed that Na-based activators were not capable of improving the characteristics of the cementitious products if compared to Portland cement under both normal and accelerated curing. Conversely, the use of calcium chloride at 40 °C-curing did promote the pozzolanic properties of bottom ash, leading to UCS values of 45.5 and 60.0 MPa after 10 and 20 days, respectively, as opposed to a value of 43.6 MPa obtained after 28 days for Portland cement under normal curing conditions.     

Polycyclic aromatic hydrocarbons (PAHs) in soils of the Moscow Region--concentrations, temporal trends, and small-scale distribution

The knowledge of the environmental fate of polycyclic aromatic hydrocarbons (PAHs) is restricted to few climatic regions of the world almost excluding the Taiga. Our objectives were to (i) separate anthropogenic from background contributions to PAH concentrations and (ii) determine temporal trends in PAH concentrations during the last century including the change in distribution of PAHs in interior and exterior portions of aggregates in soils of the Moscow region. Along a southeast-bound transect from Moscow (windward in winter) and at a background location northeast of Moscow (leeward in winter), seven topsoil samples were collected in 1910-1954 and 35 in 1998-2003. We fractionated the soils in interior and exterior portions of aggregates > 10 mm and remaining soil without aggregates. The sum of 21 PAHs (sigma21PAHs) concentrations in recent bulk soil ranged from 59 to 1350 ng g(-1). The concentrations of all PAHs were lower outside than in Moscow. The range of the concentrations of the sigma21PAHs in archived soil samples (159-1280 ng g(-1)) was similar as in recent soils. In most recent and archived samples, naphthalene and phenanthrene, were most abundant. The concentrations of low-molecular-weight PAHs decreased during the last century at most sites; those of high-molecular-weight compounds increased. The sigma21PAHs concentrations were accumulated in the exterior of aggregates (109%) and depleted in the interior (95%) relative to the concentration in bulk soil (defined as 100%), which was similar to that in the soil without aggregates (99%). The differences between aggregate interior and exterior did not change during the last century. The dominance of naphthalene and phenanthrene is typical of remote regions. The urban influence on PAH concentrations in the last century was small.     

Effects of commercial diazinon and imidacloprid on microbial urease activity in soil and sod

Diazinon [O,O-diethyl O-2-isopropyl-6-methyl(pyrimidine-4-yl) phosphorothioate] and imidacloprid [1-(1-[6-chloro-3-pyridinyl]methyl)-N-nitro-2-imidazolidinimine] are applied to lawns for insect control simultaneously with nitrogenous fertilizers such as urea, but their potential effect on urease activity and nitrogen availability in turfgrass management has not been evaluated. Urease activity in enzyme assays, washed cell assays, and soil slurries was examined as a function of insecticide concentration. Intact cores from field sites were used to assess the effect of insecticide application on urease activity in creeping bentgrass (Agrostis palustris Huds.) and bluegrass (Poa pratensis L.) sod. Bacterial urease from Bacillus pasteurii and plant urease from jack bean [Canavalia ensiformis (L.) DC.] were unaffected by the insecticides. Both insecticides inhibited the growth of Proteus vulgaris, a urease-producing bacterium, but only diazinon significantly reduced urease activity in washed cells; neither insecticide inhibited urease activity in sonicated cells. Neither diazinon nor imidacloprid inhibited urease activity in Woolper soil (fine, mixed, mesic Typic Argiudoll) slurries, but diazinon slightly inhibited urease activity in Maury soil (fine, mixed, semiactive, mesic Typic Paleudalf) slurries. Imidacloprid had no effect on urease activity in creeping bentgrass or bluegrass sod at up to 10 times the commercial application rate. Diazinon briefly, but significantly, reduced urease activity in bluegrass sod. Co-application of imidacloprid and urea appears to be benign with respect to urease activity in soil and sod. Diazinon, in contrast, appears to have a significant, short-term, inhibitory effect on the microbial urease-producing community, but that effect depends on soil type.     

Green roof stormwater retention: effects of roof surface, slope, and media depth

Urban areas generate considerably more stormwater runoff than natural areas of the same size due to a greater percentage of impervious surfaces that impede water infiltration. Roof surfaces account for a large portion of this impervious cover. Establishing vegetation on rooftops, known as green roofs, is one method of recovering lost green space that can aid in mitigating stormwater runoff. Two studies were performed using several roof platforms to quantify the effects of various treatments on stormwater retention. The first study used three different roof surface treatments to quantify differences in stormwater retention of a standard commercial roof with gravel ballast, an extensive green roof system without vegetation, and a typical extensive green roof with vegetation. Overall, mean percent rainfall retention ranged from 48.7% (gravel) to 82.8% (vegetated). The second study tested the influence of roof slope (2 and 6.5%) and green roof media depth (2.5, 4.0, and 6.0 cm) on stormwater retention. For all combined rain events, platforms at 2% slope with a 4-cm media depth had the greatest mean retention, 87%, although the difference from the other treatments was minimal. The combination of reduced slope and deeper media clearly reduced the total quantity of runoff. For both studies, vegetated green roof systems not only reduced the amount of stormwater runoff, they also extended its duration over a period of time beyond the actual rain event.     

HISTORICAL TRENDS IN SEDIMENTATION RATES AND SEDIMENT PROVENANCE,FAIRFIELD LAKE,WESTERN NORTH CAROLINA1

Sedimentation rates and sediment provenance were examined for lacustrine sediments deposited in Fairfield Lake, western North Carolina, during the past 111 years. Stratigraphic, radionuclide, and cartographic data indicate that sedimentation rates have increased several fold during the past three decades in response to localized development. The magnitude of increased sedimentation was surprising given limited development within the basin: 0.12 to 0.68 buildings/ha in 2000 in those parts directly delivering sediment to the dated cores. Thus, the analysis illustrates the potential sensitivity of watersheds in the southern Appalachians to changes in land cover. An approach that combined geochemical fingerprinting with sediment mixing models was subsequently evaluated to determine its ability to accurately estimate the contribution of sediment from (1) major bedrock formations that underlie the watershed and (2) potential sources associated with four land cover categories. Sediment sources in both analyses proved difficult to geochemically fingerprint to greater than 90 percent accuracy using data on acid‐soluble metals and selected isotopes of lead (Pb). The relative contributions of sediment from delineated sources, estimated by the mixing models, generally corresponded with known temporal and spatial patterns of land cover. However, the models were plagued by two significant problems — the chemical alteration of sediments as they were transported through upland streams to depositional sites within the lake and the loss of elemental mass. Thus, future investigations using the fingerprinting approach in this area of intense weathering, and presumably others, will need to modify the existing methods to more accurately elucidate changes in sediment provenance related to development.     

Spatial sampling and the environment: some issues and directions

In this paper we summarize research issues for spatial environmental sampling stemming from a NISS/USEPA workshop held on 21-22 September 1994 at Chapel Hill, NC.     

Behavioral aspects of sperm competition in cuttlefish, Sepia officinalis (Sepioidea: Cephalopoda)

Sexual selection studies in cephalopods indicate that sperm competition is a central feature of their mating systems, yet this has not been studied experimentally in any detail. In 1998 we staged 20 matings of the cuttlefish, Sepia officinalis L., in the laboratory. Males rapidly initiated mating in the “head-to-head” position, with no apparent courtship. Mating lasted an average of 10 min (range 7 to 14 min). For the first 6 min (on average 63% of the mating duration), the male flushed strong jets of water directly at the female's buccal membrane, which sometimes resulted in the expulsion of parts of spermatangia placed there in recent matings. Then, in a single discrete movement that lasted an average of only 14 s, the male's modified fourth left arm – the hectocotylus – wrapped around a single large bundle of spermatophores (ca. 150 to 300) and transferred them to the female's buccal membrane. For the remainder of the mating (average 3 min, range 1.5 to 5.0 min), the hectocotylus repeatedly broke the spermatophores open, and manipulated them, so that sperm were released and many spermatangia were attached along the ventral buccal membrane, near the paired seminal receptacles. Approximately 140 spermatangia were attached in rows 3 to 5 deep around the ventral buccal membrane in a single mating; the rest were usually discarded during mating. Histology revealed that each of the seminal receptacles consists of a series of sperm storage bulbs connected by a central duct, which leads to a single pore at the surface of the buccal membrane. Baseline data on sperm motility were obtained, but the mechanism by which sperm enter the seminal receptacle remains unknown. Females seemed to initiate termination of mating, then males guarded their mates temporarily. These results, combined with other recent laboratory experiments, provide evidence that sperm competition may be a major feature of the mating system of S. officinalis. Received: 4 January 1999 / Accepted: 18 May 1999     

Ammonia emission from grassland and livestock production systems in the UK

Emissions of ammonia were measured from livestock excreta and fertilisers applied to grass swards, from grazed paddocks, from decomposing grass herbage and from an animal house containing dairy cows. Emissions from urine, dung, slurry and fertilisers were determined using a system of wind tunnels with each tunnel covering an area of 1 m(2). Emissions from grazed swards were determined using a micrometeorological mass balance method. From the results of these measurements, together with other published information, an inventory for ammonia emissions has been calculated for grassland and livestock production systems over the UK as a whole. It is estimated that emissions from grassland and cattle and sheep production amount to about 230 kt NH(3)-N annually, while emissions from pig and poultry production amount to about 40 kt and 80 kt NH(3)-N, respectively.     

Trace metals in the hair of habitants of the Ok Tedi region, Papua New Guinea

It has long been known that mining activity can markedly change the level and distribution of certain heavy metals in the adjacent environment. This pollution can be quite widespread and long lasting and often has deleterious effects on the health of local populations. In the present study scalp hair was used as the biopsy material because of its ease of collection and long history of use in this connection. Hair was collected from all the local villages in the vicinity of the mine site, as well as from Papua New Guinean nationals from other provinces, and European expatriates who were employed by the mining company and who were resident in the area. Hair from local people showed a remarkably high iron content by comparison with previously studied populations. The extreme variations in hair iron levels were reflected in the differential distribution of levels according to location, age and sex. Hair cadmium was also high in the population studied. Hair copper, lead, zinc and mercury all appeared to be within 'normal' limits by comparison with other general populations. These results are discussed in the context of the environmental and social impact of the mining operations on the local people.