Comparison of particulate mass, chemical species for urban, suburban and rural areas in central Taiwan, Taichung

Aerosol samples for PM2.5, PM(2.5-10) and TSP were collected from June to September 1998 and from February to March 1999 in central Taiwan. Ion chromatography was used to analyze the acidic anions: sulfate, nitrate and chloride in the Universal samples. The ratios of fine particle concentrations to coarse particle concentrations displayed that the fine particle concentrations are almost greater than that of coarse particle concentrations in Taichung area. The average concentrations of PM2.5, PM(2.5-10) and TSP in urban sites are higher than in suburban and rural sites at both daytime and night-time. Chloride dominated in the coarse mode in daytime and in fine mode in night-time. Nitrate can be found in both the coarse and fine modes. Sulfate dominated in fine mode in both daytime and night-time.     

微量元素对柠檬酸废水发酵回用的影响

本文研究了微量元素Cu2 、Fe2 、Zn2 、Mn2 、Mg2 和PO3-4 对柠檬酸中和废水发酵的影响。在经过“碱沉淀—离子交换法 (AIE法 )”处理后的废水培养基中分别加入 1× 1 0 -8g/mlMn2 、1× 1 0 -7g/mlZn2 、1× 1 0 -6 g/mlMg2 、1× 1 0 -5g/mlCu2 和 1 .5× 1 0 -2 g/mlPO3-4使产酸依次提高 2 .8%、9.0 %、1 0 .5 %、8.3%、7.2 %和 3.4 %。Fe2 的加入降低了柠檬酸产量。     

Decolorizing of lignin wastewater using the photochemical UV/TiO2 process

Studies on applying the photochemical UV/TiO2 oxidation process to treat the lignin-containing wastewater for dissolved organic carbon (DOC), color and reducing A254 (the absorption at the wavelength of 254 nm) have been carried out. The data obtained in this study demonstrate that the UV/TiO2 process is effective in oxidizing the lignin thus reducing the color and DOC of the wastewater treated. The combined UV/TiO2 treatment can achieve better removal of DOC and color than the UV treatment alone. Color removal, based on American Dye Manufacture Index (ADMI) measurement, is greater than 99% if the pH is maintained at 3.0 with the addition of 1 g l(-1) TiO2. When 10 g l(-1) TiO2 is applied, the oxidation reduction potential (ORP) value is reached to result in an 88% removal of both DOC and color. A model was developed based on the variation of ORP during the photochemical reaction to simulate the decoloring process. The proposed model can be used to predict the color removal efficiency of the UV/TiO2 process.     

Adsorptive conversion of nitrogen dioxide from etching vent gases over activated carbon

Some metal etching operations emit limited flow rates of waste gases with reddish-brown NO₂ fume, which may cause visual and acidic-odor complaints, as well as negative health effects. In this study, tests were performed by passing caustic-treated waste gases vented from Al-etching operations through columns packed either with virgin or regenerated granular activated carbon (GAC) to test their adsorptive conversion performance of NO₂ in the gases. The gases contained 5–55 ppm NO₂ and acetic and nitric acids of below 3 ppm. Exhausted carbon was regenerated by scrubbing it with caustic solution and water, and dried for further adsorption tests. Results indicate that with an (empty bed residence time (EBRT) of 0.15 sec for the gas through the GAC-packed space, around 60% of the influent NO₂ of 54 ppm could be removed, and 47% of the removed NO₂ was converted by and desorbed from the carbon as NO. GAC used in the present study could be regenerated at least twice to restore its capacity for NO₂ adsorption. Within EBRTs of 0.076–0.18 sec, the adsorptive conversion capacity was linearly varied with EBRT. In practice, with an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design.

Implications: Some metal etching operations emit waste gases with reddish-brown (yellow when diluted) NO₂ fume which may cause visual and acidic-odor complaints, as well as negative health effects. This study provides a simple process for the adsorptive conversion of NO₂ in caustic-treated waste gases vented from metal-etching operations through a GAC column. With an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design. Saturated GAC can be regenerated at least twice by simply scrubbing it with aqueous caustic solution.     

一种基于图像内容过滤的有线电视网信息审计系统

如何实现广播电视网节目内容的自动审计已成为目前广播电视网网络安全所面临的问题。笔者首先分析了目前有线电视网节目内容的审计,大多基于人工,不仅费时费力,且与先进的现代电视技术极不相匹配,接着对图像内容过滤的关键技术进行了分析,并用反差、能量、熵、相关4个特征量表示纹理特征,在此基础上用交互的动态规划法来进行图像对象分割然后利用相似度描述两个特征量的相似程度,最后以对黄色内容识别为实例,通过提取图像的纹理特征与定义好的特征库相匹配,监控包含不良人体图像信息的视频,实现对有线电视网节目内容的自动审计。     

氧化亚铁硫杆菌浸出废弃挠性PCB中金属的影响因素分析

废弃挠性PCB是资源化价值高的电子废弃物之一,正需环境友好的方法回收其所含的多种有价金属。采用显微镜对破碎后的挠性PCB粉样进行解离情况观察,发现破碎法难以将挠性PCB中的金属与非金属解离。通过设计单因素实验,研究挠性PCB粉末粒度大小、添加量、培养液初始pH、菌接种量、活化时间以及FeSO4·7H2O添加量6个因素对氧化亚铁硫杆菌（Acidithiobacillus ferrooxidans,简称A.f菌）浸出挠性PCB中金属过程的影响。结果表明,A.f菌不能浸出挠性PCB中Au,但Cu、Ni可以有效浸出且最优化条件为：10 g·L-1挠性PCB、粒度0.25~0.42 mm、培养基初始pH 2.5、菌接种量5%、菌活化时间5 d、FeSO4·7H2O添加量30 g·L-1,金属Cu的浸出率达到90.1%,比未接种处理高出42.4%;金属Ni的浸出率达到了85.9%,比未接种处理高出了32.9%。因此,采用生物法可环境友好地回收挠性PCB中Cu、Ni,有利于废弃挠性PCB的资源化处理。     

氯自由基介导的BDD电极选择性氧化脱氮

为实现氨氮的高效选择性转化,设计了一个氯自由基介导的电化学体系。该电化学体系以稳定性好、氧化能力强的掺硼金刚石(BDD)电极为阳极,以Pd-Cu修饰的泡沫镍材料(Pd-Cu/NF)为阴极,以氯化钠为电解质,对BDD电极选择性电催化氧化性能与机理进行了研究。结果表明：在4.0 V电压下,体系中的Cl⁻原位可转化成氯自由基(Cl·),Cl·可选择性地将氨氮转化为N₂和少量$ {\rm{NO}}_3^ - $,副产物$ {\rm{NO}}_3^ - $在Pd-Cu/NF阴极被高效还原为N₂;分别探究了阴极材料、电场强度、电极间距、溶液pH和电解质种类对氨氮转化性能的影响。通过电子顺磁共振和自由基捕获实验,证实了Cl·在氨氮转化过程中发挥了重要作用。在最优条件下,可实现40 min内100%的氨氮转化率和25 mg·L⁻¹的N₂生成量,以上研究结果可为解决水体中氨氮的污染问题提供参考。     

钴铜铁三元类水滑石材料催化过硫酸氢钾复合盐降解苯酚

采用共沉淀法制备过渡金属钴、铜、铁组成的钴铜铁三元类水滑石材料(CoCuFe-LDH),用于催化过硫酸氢钾复合盐(PMS)降解水中苯酚,并考察了初始pH、CoCuFe-LDH催化剂投加量、PMS用量对苯酚降解效率的影响。实验结果表明:CoCuFeLDH对PMS的催化活性较高;在pH为中性,催化剂为0.20g/L,PMS为2.5mmol/L,苯酚为50mg/L的条件下处理60min,苯酚的去除率可达96%;当催化剂投加量分别为0.05、0.10、0.15g/L,反应40min时,苯酚的去除率分别为76%、82%和91%。自由基猝灭实验表明,CoCuFe-LDH/PMS催化体系中存在硫酸根自由基和羟基自由基,但硫酸根自由基为主要活性自由基。