Distribution of radionuclides among the main components of Lake Chervyanoe in the Eastern Ural Radioactive Trace

Radioecological conditions have been estimated in Lake Chervyanoe located on the central axis of the Eastern Ural Radioactive Trace (EURT) about 100–110 km northeast of the Mayak Production Association. Data on the ⁹⁰Sr and ¹³⁷Cs contents in the main components of the lake, the distribution of these radionuclides over the profile of bottom sediments, and their amounts in the lake are presented. The experimental data have been used to construct mathematical models for estimating changes in the radionuclide concentrations and amounts in the water and bottom sediments of the lake over a long period after the nuclear accident, as well as the tritium content of the lake water in different periods of time.     

中国农田肥料N2O直接和间接排放重新评估

农田肥料(氮肥、复合肥、有机肥)是我国N₂O最大的排放源,其估计直接决定了排放总量的可靠性.为此,重新评估了中国农田肥料N₂O的直接和间接排放,选择2008年县域尺度活动数据、具有空间分异性的本土排放因子和参数来重新评估其排放规模、结构、空间格局及不确定性;通过与IPCC、EDGAR等国内外研究结果的对比分析,阐述该排放清单的可靠性和全面性.结果表明,2008年我国农田肥料N₂O排放总量为617.1 Gg(处于213.7~1149.2 Gg之间),其中,氮肥直接排放为458.8 Gg(74.5%),有机肥直接排放为121.0 Gg(19.6%),挥发沉降和淋溶径流造成的间接排放分别为28.0 Gg(4.5%)和9.3 Gg(仅占1.5%左右).排放集中在华北平原、东北的松辽平原、华中的淮河流域和四川盆地,以及华南的珠三角、雷州半岛和台湾地区的县(区、市、旗),主要分布在江苏(52.4 Gg)、四川(48.0 Gg)、湖北(43.2 Gg)、广东(40.8 Gg)、河南(39.6 Gg)、安徽(38.4 Gg)、湖南(31.6 Gg)、山东(28.9 Gg),其累积规模为全国总量的52%,其中,近50%的贡献源于164个县(区、市、旗).本排放清单具有更高的准确度和空间分辨率,而基于IPCC (2006)排放因子及参数的估计排放总量高估了约8.3%,对直接排放和间接排放则分别低估了12.5%和高估了330%.此外,在空间格局上还表现出高值区低估和低值区高估的特点,在491和1225个县(区、市、旗)的相对偏差超过了100%和50%,特别指出的是,间接排放在大部分县(区、市、旗)的相对偏差达到135%左右.     

Exploration of Multifunctional Properties of Piper betel Leaves Extract Incorporated Polyvinyl Alcohol-Oxidized Maize Starch Blend Films for Active Packaging Applications

Journal of Polymers and the Environment - This study explains the development of eco-friendly polyvinyl alcohol (PVA)/oxidized maize starch (OMS)/Betel leaves extract (BLE) blend films by employing...     

ASSESSMENT OF ANTHROPOGENIC LOADS ON LANDSCAPES AS A TOOL TO DETERMINE THE POTENTIAL FOR SUSTAINABLE REGIONAL DEVELOPMENT: CASE STUDY FROM AZERBAIJAN

In order to determine the potential for sustainable regional development of the Caspian coastal zone, a study was made for the Khachmaz–Absheron zone of Azerbaijan. An evaluation was performed to assess the anthropogenic load on landscapes. Using the 8-point scale offered by Isachenko [2001, Ecological Geography of Russia, Saint Petersburg University Press, Saint Petersburg] for the indicators of agricultural, industrial, urban and integral anthropogenic loads, we did a preliminary ranking of the provinces in the Khachmaz–Absheron zone of Azerbaijan for the each indicator taken separately. Vital statistics were used as a supplementary indicator of environmental conditions in the region. By comparing the data for provinces with each other and the data on Azerbaijan average, we have classified the provinces into 4 groups according to specific combinations of the indicators. Each group of provinces has distinctive environmental conditions and features for sustainable development. The classification makes it possible to develop certain recommendations for the regional sustainable development. Measures to be implemented within the Azerbaijan State Program on Social and Economic Development of Regions are also discussed. In the Khachmaz province, production of ecologically pure products is highly recommended. Special attention should be given to the development of tourism and recreational institutions in the Khachmaz, Khizi and Devechi provinces. Recommendations for these provinces include further development of industry on the basis of modern safe technologies. The irrigation and drainage networks should be reconstructed. The reconstruction will make it possible to reduce water loss and to increase the productivity of agriculture. In the Absheron province, Baku and Sumgait cities environmental systems are overloaded, and so the works at highly polluting enterprises must be stopped, the enterprises have to be re-equipped (old filters must be changed first of all) or relocated from the area (a decrease of environmental risk should be in the focus of attention). For improving of air quality, green areas should increase. There is a need to reduce urban traffic density and to reconstruct highways. Use of old vehicles must be forbidden or restricted, and transition to environmentally friendly fuel should be supported in every way possible. It is necessary to bring the waste management system and sanitary landfills up to international standards, and to improve the water supply and sewerage systems.     

A directional passive air sampler for monitoring polycyclic aromatic hydrocarbons (PAHs) in air mass

A passive air sampler was developed for collecting polycyclic aromatic hydrocarbons (PAHs) in air mass from various directions. The airflow velocity within the sampler was assessed for its responses to ambient wind speed and direction. The sampler was examined for trapped particles, evaluated quantitatively for influence of airflow velocity and temperature on PAH uptake, examined for PAH uptake kinetics, calibrated against active sampling, and finally tested in the field. The airflow volume passing the sampler was linearly proportional to ambient wind speed and sensitive to wind direction. The uptake rate for an individual PAH was a function of airflow velocity, temperature and the octanol-air partitioning coefficient of the PAH. For all PAHs with more than two rings, the passive sampler operated in a linear uptake phase for three weeks. Different PAH concentrations were obtained in air masses from different directions in the field test.     

Geochemical and geostatistical investigations of chromium pollution in groundwater.

Geochemical and geostatistical study of the chromium concentration in groundwater occurring at variable depths of 12 to 33.5 m (40 to 110 ft) in the Karachi urban area of Pakistan have been made. Samples were collected at variable distances, with a maximum of 1 km interval, on the bases of population, industries, types, and density. The chromium concentration has also been worked out to deduce the threshold value of the area under study and the estimation of probability impact modeling, in terms of concentration variation, by using the disjunctive kriging technique. The outcome of the present work appears to be a good tool to decipher pollution variation in the groundwater of highly urbanized areas, with respect to the population and industries. The patterns of distribution of chromium concentration in groundwater and pollution hotspots in particular localities appear to be more related to the types of industries than to the effect of population types.     

A model testing study for the transfer of radioactivity to fruit

This paper compares predictions of the foodchain model SPADE with experimental data for the transfer of (134)Cs and (85)Sr to strawberry plants following acute foliar and soil contamination. The transfer pathways considered in this exercise included direct deposition to fruit, leaf-to-fruit, soil-to-leaf and soil-to-fruit transfers. Following foliar contamination, the difference between predicted and measured radionuclide activity values varied between a factor of 0.5-10 for fruit and 4.5-7 for leaf. Following soil contamination, the difference between predicted and measured values varied between a factor of 3-74 for fruit and 32-44 for leaf. In all cases the difference between measured and predicted values was smaller for (85)Sr than (134)Cs. Measured and predicted activities were higher for leaf than fruit. Both measured and predicted (134)Cs concentrations in fruit and leaf are higher when deposition occurs at ripening than at anthesis. These results confirm the need for more data on fruit, even for Cs and Sr, to support models in predicting the transfer of radionuclides to fruit crops. Ongoing research projects funded by the UK Food Standards Agency aim to provide some data on radionuclide transfer to herbaceous, shrub and tree fruits, which will help improve radiological assessment models in order to provide better protection for consumers.     

The longitudinal dependence of black carbon concentration on traffic volume in an urban environment

The purpose of this study was to evaluate the effect of traffic volume on ambient black carbon (BC) concentration in an inner-city neighborhood "hot spot" while accounting for modifying effects of weather and time. Continuous monitoring was conducted for 12 months at the Baltimore Traffic Study site surrounded by major urban streets that together carry over 150,000 vehicles per day. Outdoor BC concentration was measured with an Aethalometer; vehicles were counted pneumatically on two nearby streets. Meteorological data were also obtained. Missing data were imputed and all data were normalized to a 5-min observational interval (n = 105,120). Time-series modeling accounted for autoregressively (AR) correlated errors. This study found that outdoor BC was positively correlated at a statistically significant level with neighborhood-level vehicle counts, which contributed at a rate of 66 +/- 10 (SE) ng/m3 per 100 vehicles every 5 min. Winds from the SW-S-SE quarter were associated with the greatest increases in BC (376-612 ng/m3). These winds would have entrained BC from Baltimore's densely trafficked central business district, as well as a nearby interstate highway. The strong influence of wind direction implicates atmospheric transport processes in determining BC exposure. Dew point, mixing height, wind speed, season, and workday were also statistically significant predictors. Background exposure to BC was estimated to be 905 ng/m3. The optimal, statistically significant representation of BC's autocorrelation was AR([1:6]) x 288 x 2016, where the short-term AR factor (lags 1-6) indicated that BC concentrations are correlated for up to 30 min, and the AR factors for lags 288 and 2016 indicate longer-term autocorrelations at diurnal and weekly cycles, respectively. It was concluded that local exposure to BC from mobile sources is substantially modified by meteorological and temporal conditions, including atmospheric transport processes. BC concentration also demonstrates statistically significant autocorrelation at several time scales.     

Chemical composition of burnt smell caused by accidental fires: environmental contaminants

The chemical composition of the odors typical of fires has recently been deciphered. Basically the constituents are mixtures of acetophenone, benzyl alcohol, hydroxylated derivatives of benzaldehyde, methoxylated and/or alkylated phenols and naphthalene. This finding makes it possible to develop objective, practical analytic measurement methods for the burnt smell as a contribution to improving fire damage assessment and remediation monitoring. With the aid of an artificially produced burnt smell and a panel of testers the odor detection threshold of a test mixture was determined olfactometrically to 2 μg m⁻³. Using a defined burnt-smell atmosphere in a test chamber, analytical methods with active sampling, the adsorbents XAD 7 and TENAX TA, and GC/MS measurement were then optimized and tested with a view to being able to carry out sensitive quantitative measurement of burnt smells. A further practical method with particular application to the qualitative characterization of this odor is based on the use of a new SPME (solid-phase microextraction) field sampler with DVB/CAR/PDMS (divinylbenzene/Carboxen™/polydimethylsiloxane) fibers.