Exposure and inhalation risk assessment in an aluminium cast-house

To date the exposure, absorption and respiratory health effects of cast-house workers have not been described since most studies performed in the aluminium industry are focused on exposure and health effects of potroom personnel. In the present study, we assessed the external exposure and the absorbed dose of metals in personnel from the aluminium cast house. This was combined with an evaluation of respiratory complaints and the lung function of the personnel. 30 workers from an aluminium casting plant participated and 17 individuals of the packaging and distribution departments were selected as controls. The exposure was assessed by the quantification of total inhalable fume with metal fraction and by the determination of urinary aluminium, chromium, beryllium, manganese and lead concentration. Carbon monoxide (CO), carbon dioxide (CO2), aldehydes and polyaromatic hydrocarbons and man-made mineral fibres concentration were assessed as well. In order to evaluate their respiratory status each participant filled out a questionnaire and their lung function was tested by forced spirometry. Total inhalable fume exposure was maximum 4.37 mg m(-3). Exposure to the combustion gases, man-made mineral fibres and metal fume was well below the exposure limits. Beryllium could not be detected in the urine. The values of aluminium, manganese and lead in the urine were all under the respective reference value. One individual had a urinary chromium excretion above the ACGIH defined biological exposure index (BEI) of 30 microg g(-1) creatinine. There was no significant difference in any of the categories of the respiratory questionnaire and in the results of the spirometry between cast house personnel and referents (Chi-square, all p > 0.05). Exposure in cast houses seem to be acceptable under these conditions. However, peak exposure to fumes cannot be excluded and the potential risk of chromium and beryllium exposure due to the recycling of aluminium requires further attention.     

以关键酶为基础共代谢模型的建立——以甲烷细菌共代谢三氯乙烯为例

根据共代谢过程扣特点，详细推导建立了一个以关键酶为中心的综合性数学模型，模型不仅包括传统的基质降解迷率和微生物生长，而且包括关键产诱导，毒性抑制和自我恢复，以及能量的调节等重要因素，模型能够在理解释文献报道的各种实验现象。     

Predator odour and its impact on male fertility and reproduction in Phodopus campbelli hamsters

 This study investigated the influence of cat urine odour in suppressing development and fertility in Campbell's hamster males. Exposure to this odour from postnatal day 11 until day 45 (sexual maturation) resulted in reduced sex organ weights, reduced testosterone levels and in an increase in abnormalities of the synaptonemal complex in both sex chromosomes and autosomes. Subsequent breeding experiments revealed a significant decrease in litter size. All these data indicate a severe effect of predator odour on the breeding success of potential prey species. It is assumed that these effects are caused by the sulphurous compounds in the urine; however, the underlying mechanisms are not yet known. Received: 31 January 2000 / Accepted in revised form: 6 June 2000     

Utilisation of bubble resonance phenomena to improve gas–liquid contact

 In several branches of science and technology a gaseous phase is dispersed into a liquid in the form of bubbles, a gaseous component then dissolves into the liquid and subsequently undergoes chemical reaction. The overall process performance can be improved substantially when the area of gas–liquid contact is increased. By subjecting the liquid phase to low frequency vibrations, the bubbles are shown to suffer significant breakage, induced by resonance. When the vibration is properly tuned, the interfacial area is found to increase by a factor of 1.8–2.4, depending on the properties of the liquid. Resonance-induced bubble breakage phenomena have a great potential for improving the rates of chemical processes involving fast reactions, with minimal energy input. Received: 7 July 2000 / Accepted in revised form: 28 August 2000     

Fluid Mechanics of Biological Surfaces and their Technological Application

 A survey is given on fluid-dynamic effects caused by the structure and properties of biological surfaces. It is demonstrated that the results of investigations aiming at technological applications can also provide insights into biophysical phenomena. Techniques are described both for reducing wall shear stresses and for controlling boundary-layer separation. (a) Wall shear stress reduction was investigated experimentally for various riblet surfaces including a shark skin replica. The latter consists of 800 plastic model scales with compliant anchoring. Hairy surfaces are also considered, and surfaces in which the no-slip condition is modified. Self-cleaning surfaces such as that of lotus leaves represent an interesting option to avoid fluid-dynamic deterioration by the agglomeration of dirt. An example of technological implementation is discussed for riblets in long-range commercial aircraft. (b) Separation control is also an important issue in biology. After a few brief comments on vortex generators, the mechanism of separation control by bird feathers is described in detail. Self-activated movable flaps (=artificial bird feathers) represent a high-lift system enhancing the maximum lift of airfoils by about 20%. This is achieved without perceivable deleterious effects under cruise conditions. Finally, flight experiments on an aircraft with laminar wing and movable flaps are presented.     

First observation of different diffusion coefficients for two conformers in a neat liquid

 Self-diffusion coefficients were studied for the highly polar liquid N-methylformamide at pressures up to 200 MPa between the melting pressure curves and 420 K by the spin-echo method. N-Methylformamide exists as a mixture of two conformers in the neat liquid. These conformers have large differences at lower temperatures in their dynamic and structural properties. The self-diffusion coefficient of the cis-conformer being 17% lower than that of the trans-conformer at the same T and p. This is the first observation of such an effect. The experimental study is supported by Monte Carlo (MC) calculations which show that the first neighbors around a cis conformer are arranged differently than in an all trans liquid. The difference leads in the simulations to a much lower dielectric constant for the trans-cis mixture and might also explain the retardation of diffusion for the cis conformer. Received: 15 November 1999 / Accepted in revised form: 28 February 2000     

A GPS-based system for recording the flight paths of birds

 The GPS recorder consists of a GPS receiver board, a logging facility, an antenna, a power supply, a DC-DC converter and a casing. Currently, it has a weight of 33 g. The recorder works reliably with a sampling rate of 1/s and with an operation time of about 3 h, providing time-indexed data on geographic positions and ground speed. The data are downloaded when the animal is recaptured. Prototypes were tested on homing pigeons. The records of complete flight paths with surprising details illustrate the potential of this new method that can be used on a variety of medium-sized and large vertebrates. Received: 2 February 2000 / Accepted in revised form: 17 April 2000     

Gathering “wild” food in the city: rethinking the role of foraging in urban ecosystem planning and management

Recent “green” planning initiatives envision food production, including urban agriculture and livestock production, as desirable elements of sustainable cities. We use an integrated urban political ecology and human–plant geographies framework to explore how foraging for “wild” foods in cities, a subversive practice that challenges prevailing views about the roles of humans in urban green spaces, has potential to also support sustainability goals. Drawing on research from Baltimore, New York City, Philadelphia, and Seattle, we show that foraging is a vibrant and ongoing practice among diverse urban residents in the USA. At the same time, as reflected in regulations, planning practices, and attitudes of conservation practitioners, it is conceptualised as out of place in urban landscapes and an activity to be discouraged. We discuss how paying attention to urban foraging spaces and practices can strengthen green space planning and summarise opportunities for and challenges associated with including foragers and their concerns.     

Building Greater Sustainability in Supply Chains

Challenges companies face and tools they use to identify and reduce their environmental footprints across their supply chains