Atmospheric Emissions from Oxidation Ponds

The electrodes in industrial precipitators collect many tons of dust daily, and the efficient transfer of this dust burden to the hoppers is a challenging problem in mechanical engineering. Many varieties of devices have been tried; hammers, vibrators, scrapers, water flushing, gas blasting, etc. Impact devices for this purpose are usually called “rappers.” Laboratory experiments described in this paper show that normal (perpendicular) rapping is more effective than shear rapping; that thick dust layers are more easily removed by rapping than thin ones; that rapping becomes easier with increasing temperature, within limits; and that the electrostatic forces acting upon the precipitated dust layer play an important role. Quantitative data are shown graphically. The relation of these results to previous studies by other investigators is discussed.     

Integrated approach to PCE‐impacted site characterization,site management,and enhanced bioremediation

Tetrachloroethene (PCE)‐ and trichloroethene (TCE)‐impacted sites pose significant challenges even when site characterization activities indicate that biodegradation has occurred naturally. Although site‐specific, regulatory, and economic factors play roles in the remedy‐selection process, the application of molecular biological tools to the bioremediation field has streamlined the assessment of remedial alternatives and allowed for detailed evaluation of the chosen remedial technology. The case study described here was performed at a PCE‐impacted site at which reductive dechlorination of PCE and TCE had led to accumulation of cis‐dichlorethene (cis‐DCE) with concentrations ranging from approximately 10 to 100 mg/L. Bio‐Trap® samplers and quantitative polymerase chain reaction (qPCR) enumeration of Dehalococcoides spp. were used to evaluate three remedial options: monitored natural attenuation, biostimulation with HRC®, and biostimulation with HRC‐S®. Dehalococcoides populations in HRC‐S‐amended Bio‐Traps deployed in impacted wells were on the order of 10³ to 10⁴ cells/bead but were below detection limits in most unamended and HRC‐amended Bio‐Traps. Thus the in situ Bio‐Trap study identified biostimulation with HRC‐S as the recommended approach, which was further evaluated with a pilot study. After the pilot HRC‐S injection, Dehalococcoides populations increased to 10⁶ to 10⁷ cells/bead, and concentrations of cis‐DCE and vinyl chloride decreased with concurrent ethene production. Based on these results, a full‐scale HRC‐S injection was designed and implemented at the site. As with the pilot study, full‐scale HRC‐S injection promoted growth of Dehalococcoides spp. and stimulated reductive dechlorination of the daughter products cis‐DCE and vinyl chloride. © 2008 Wiley Periodicals, Inc.     

Genetic variation in the neritic squid Loligo forbesi (Myopsida: Loliginidae) in the northeast Atlantic Ocean

Horizontal starch gel electrophoresis was employed to investigate levels of genetic differentiation between 13 samples of the neritic squid species Loligo forbesi Steenstrup obtained from throughout the majority of its known geographical range. Six enzyme loci identified in a preliminary study as being polymorphic were screened for variation between samples. No significant differences in allele distribution were detected between any of the samples obtained from the Faroe Bank in the north to Lisbon in the south, suggesting that squid throughout this range in the vicinity of the continental shelf are able to maintain panmixia, and effectively belong to a single population sharing a common gene pool. No clinal variation in allele distribution was detected throughout this range, a result which complements the findings of a detailed morphological companion study of the same individuals. Comparison of this homogenous European continental shelf population with squid from the Azores revealed highly significant (P<0.01) differences in allele distribution at five of the six polymorphic enzyme loci studied. A genetic identity value (I) equivalent to 0.93 over 33 loci was obtained. Analysis of F-statistics suggested migration rates between sites to be as low as one individual per five generations, a rate deemed insufficient under most models to prevent divergence by random genetic drift. The large distance and oceanic depths separating the Azores from continental Europe seem to present an effective barrier to gene flow to L. forbesi, a squid belonging to a family considered to be confined in distribution to relatively shallow, near coastal waters. The two populations of squid in the Azores and along the European continental shelf currently both ascribed to L. forbesi should therefore probably best be regarded as relative subspecies.     

Evidence of natural organochlorine formation in peat bogs

Peat samples from four ombrotrophic and two minerotrophic peat bogs in New Brunswick, Canada, have been analyzed for polychlorinated dioxins and furans (PCDD/DF's) as well as other organochlorine compounds. Data from each bog show occasional low levels of 2,3,7,8-substituted tetra-through octachloro dioxins and furans. Mono-through trichlorodioxins and furans have also been identified.

A consistent pattern was observed among the TCDD's and TCDF's which was reproducible across all peat samples analyzed. A single TCDF isomer (2468-TCDF) predominates over all other isomers whereas two isomers of TCDD were prominent (1,3,6,8-TCDD and 1,3,7,9-TCDD). This distinct isomer pattern is present at all depths and is different from that of atmospheric deposition or known sources of PCDD/DF's (eg. fly ash, pulp and paper effluent etc). The pattern is replicated with in vitro oxidative coupling of 2,4-dichlorophenol at pH 2.9 using a commercially available chloroperoxidase from the fungus Caldariomyces fumago.

Significant incorporation of ³⁶Cl-occurred in peat. Autoclaving decreased incorporation while adding casein hydrolysate increased it. The incorporation mirrored the metabolic activity (CO₂ production) of samples consistent with organochlorine synthesis being due to biological activity.

Total Organic Halide (TOX) levels in peat show a wide range in values reaching ca. 1000 ppm at mid-depth in the ombrotrophic Kelly's Bog. TOX in Kelly's Bog occurs at all depths and, since the topography probably excludes leaching from surrounding areas, a local origin of organochlorines is suggested.

Chloroform and a range of chlorinated aromatic compounds (chlorophenols, chlorophenoxy and chlorobenzoic acid derivatives) have also been identified in peat.

Our findings to date are consistent with hypothesis for a biogenic origin for at least some of the organochlorine compounds, including some of the PCDD/DF's, found in peat bogs.     

Distribution and rate of disappearance of fluorene in pond ecosystems

Fluorene, an energy related polynuclear aromatic hydrocarbon, was applied to several experimental pond ecosystems to effect concentrations of 0.12, 0.5, 2.0, 5.0, and 10.0 mg/L. Water, benthic sediment, and rooted macrophytes were monitored for fluorene residues for 56 days after application. Most of the fluorene at concentrations greater than its water solubility appeared to sublime from the surface of the ponds. The rate of disappearance of fluorene from the water decreased as the application rate increased. This reduction was linked to high concentrations and a flux of fluorene from benthic sediments, macrophytes, and pond surfaces to water columns. Several parameters of photosynthetic primary production were statistically linked to the accelerated disappearance of fluorene from the water.     

Climate and human impact on lowland lake sedimentation in Central Coastal California: the record from c. 650 ad to the present

The limnological record of human impact on catchment land cover and on lake sedimentation during the historical period has been established for Pinto Lake in Central Coastal California. In addition, the sedimentary record of the ‘pre-impact’ condition preserves evidence of a climatic control on the nature of lake sedimentation. Chronological marker horizons have been determined using pollen data in combination with the documented land-use history and introductions of exotic species. Further chronological data have been determined using ¹⁴C and ¹³⁷Cs. The impact of Mexican and Euro-American immigrants and their ‘imported’ land-use practices is clearly reflected in an order of magnitude increase in the rate of lake sedimentation to c. 9 kg m⁻² year⁻¹ (c. 2 cm year⁻¹) between 1770 and 1850. Here, the occurrence of exotic plant species indicates disturbance as early as c. 1769–1797, whilst redwood deforestation between 1844 and 1860 represents the most significant human impact. Changes in the nature of sedimentation prior to this reveal a high degree of sensitivity to changes in precipitation where subtle decreases in lake level and the supply of runoff-derived mineral matter have resulted in two periods of organic lake sedimentation c. 650–900 and 1275–1750. Set against this background condition of high sensitivity, the dramatic impacts of Euro-American settlement are unsurprising. An erratum to this article can be found at     

Mason Valley Groundwater Model: Linking Surface Water and Groundwater in the Walker River Basin,Nevada1

Carroll, Rosemary W.H., Greg Pohll, David McGraw, Chris Garner, Anna Knust, Doug Boyle, Tim Minor, Scott Bassett, and Karl Pohlmann, 2010. Mason Valley Groundwater Model: Linking Surface Water and Groundwater in the Walker River Basin, Nevada. Journal of the American Water Resources Association (JAWRA) 46(3):554-573. DOI: 10.1111/j.1752-1688.2010.00434.x Abstract: An integrated surface water and groundwater model of Mason Valley, Nevada is constructed to replicate the movement of water throughout the different components of the demand side of water resources in the Walker River system. The Mason Valley groundwater surface water model (MVGSM) couples the river/drain network with agricultural demand areas and the groundwater system using MODFLOW, MODFLOW’s streamflow routing package, as well as a surface water linking algorithm developed for the project. The MVGSM is capable of simulating complex feedback mechanisms between the groundwater and surface water system that is not dependent on linearity among the related variables. The spatial scale captures important hydrologic components while the monthly stress periods allow for seasonal evaluation. A simulation spanning an 11-year record shows the methodology is robust under diverse climatic conditions. The basin-wide modeling approach predicts a river system generally gaining during the summer irrigation period but losing during winter months and extended periods of drought. River losses to the groundwater system approach 25% of the river’s annual budget. Reducing diversions to hydrologic response units will increase river flows exiting the model domain, but also has the potential to increase losses from the river to groundwater storage.     

Evaluation of Kraft Process Pollution Abatement Strategies by Time Series Analysis of Makeup Records

A historical record of monthly chemical makeups for a North American pulp mill has been analyzed by time series methods. The analysis yields estimates for the reduction in sulfur makeup resulting from each of three separate pollution abatement moves: black liquor oxidation, blow heat recovery, and cooking liquor sulfidity reduction. Further analysis yields estimates of sulfurous emissions and of the substantially lower emissions which could have been achieved if sulfidity management had been incorporated in the program.     

Bibliometric investigation of the integration of animal personality in conservation contexts

Consistent individual differences in behavior, commonly termed animal personality, are a widespread phenomenon across taxa that have important consequences for fitness, natural selection, and trophic interactions. Animal personality research may prove useful in several conservation contexts, but which contexts remains to be determined. We conducted a structured literature review of 654 studies identified by combining search terms for animal personality and various conservation subfields. We scored the relevance of personality and conservation issues for each study to identify which studies meaningfully integrated the 2 fields as opposed to surface-level connections or vague allusions. We found a taxonomic bias toward mammals (29% of all studies). Very few amphibian or reptile studies applied personality research to conservation issues (6% each). Climate change (21%), invasive species (15%), and captive breeding and reintroduction (13%) were the most abundant conservation subfields that occurred in our search, though a substantial proportion of these papers weakly integrated conservation and animal personality (climate change 54%, invasive species 51%, captive breeding and reintroduction 40%). Based on our results, we recommend that researchers strive for consistent and broadly applicable terminology when describing consistent behavioral differences to minimize confusion and improve the searchability of research. We identify several gaps in the literature that appear to be promising and fruitful avenues for future research, such as disease transmission as a function of sociability or exploration as a driver of space use in protected areas. Practitioners can begin informing future conservation efforts with knowledge gained from animal personality research.     

The limits to risk aversion: Part 2: The permission point and worked examples

Part 2 extends the analysis to show that it is possible to find the “permission point”, the value of (the coefficient of relative) risk-aversion, at which decisions to sanction environmental protection are most likely to be made. The mathematical model describes the process by which the decision maker varies his risk-aversion over a range of feasible values to find the risk-aversion that will give him the greatest desire to invest in the protection system under consideration. If he can find such a risk-aversion before losing discrimination (because the system is too expensive, given its performance), he will adopt it as his “permission point” and decide in favour of the expenditure. The permission point is, of course, bounded above by the point of indiscriminate decision. A maximum Risk Multiplier calculated at the point of indiscriminate decision may be applied to the protection expenditure at monetary break-even to give the maximum, rational outlay on protection. Moreover, it is possible to model how the average UK adult should take decisions on protection to maximise his utility. Different situations will call for different values of risk-aversion, which may explain why economists have come up with differing estimates of this parameter in the past. However, a central, average risk-aversion may be calculated for the average UK adult as 0.85, which is within 4% of the value, 0.82, found from the newly reported method based on a trade-off between income and future free time, and is consistent with several recent economic estimates. Worked examples assess how much an organisation should spend on a protection scheme to prevent accidents with very large environmental consequences.