Zebrafish embryos/larvae for rapid determination of effects on hypothalamic-pituitary-thyroid (HPT) and hypothalamic-pituitary-interrenal (HPI) axis: mRNA expression

To identify and prioritize chemicals that may affect thyroid and adrenal/interregnal endocrine system and to reduce cost and animal use by conventional toxicity assay, an in vivo screening assay was developed using zebrafish embryos/larvae based on measurement of expression of genes that were suggested to play important roles in hypothalamic-pituitary-thyroid (HPT) and hypothalamic-pituitary-interrenal (HPI) axis. Model chemicals that could modulate HPT and HPI axis in adult fish were selected in assay validation, including anti-thyroid agent 6-Propyl-2-thiouracil (PTU) and cytochrome P450 11B (Cyp11b) enzyme inhibitor metyrapone (MET). Zebrafish embryos were exposed to different concentrations of model chemical from 4 h post-fertilization (hpf) to 5 d post-fertilization (dpf). Exposure to PTU increased mRNA expression of sodium iodide symporter (nis) and thyroglobulin (tg) involved in HPT axis, and MET treatment up-regulated all the mRNA expression tested involved in HPI axis by a compensatory mechanism. These results suggested that HPT and HPI axis were active upon chemical exposure at least at 5 dpf zebrafish. Furthermore, we studied the effects of PTU or MET on the cross-talk between HPT and HPI axis. The results demonstrated that PTU and MET could affect cross-talk responses in zebrafish embryos/larvae.     

Photo-dissociation of dimethylamine by KrBr excilamp

A study of dimethylamine photo-dissociation in the gas phase has been conducted using UV radiation delivered from a KrBr^* excilamp, driven by a sinusoidal electronic control gear with maximum emission at wavelength of 207 nm. The electrical input power and radiant power of the lamp were measured to determine their effects on the degradation. The influence of flow velocity and initial concentration of dimethylamine were also examined. In order to evaluate the photo-dissociation process comprehensively, several parameters were investigated, including removal efficiency, energy yield, carbon balance and CO₂ selectivity. It is shown that the removal efficiency increases with enhanced input power and decreased gas flow rate. A high removal efficiency of 68% is achieved for lamp power 102 W and flow velocity 15 m³ h⁻¹. The optimum dimethylamine initial concentration is around 3520 mg m⁻³, for which the energy yield reaches up to 442 g kW h⁻¹ when the input power is 65 W. In addition, two chain compounds (1,3-bis-dimethylamino-2-propanol; 3-penten-2-one, 4-amino) and three ring organic matters (1-azetidinecarboxaldehyde, 2,2,4,4-tetramethyl; N-m-tolyl-succinamic acid; p-acetoacetanisidide), were identified by GC–MS as secondary products, in order to demonstrate the pathways of the dimethylamine degradation.     

Factors influencing on the bioaccessibility of polybrominated diphenyl ethers in size-specific dust from air conditioner filters

Size-specific concentrations and bioaccessibility of polybrominated diphenyl ethers (PBDEs) in dust from air conditioner filters were measured, and the factors influencing the PBDE bioaccessibility were determined. Generally, the PBDE concentrations increased with decreasing dust particle size, and BDE209 (deca-BDE) was generally the predominant congener. The bioaccessibility ranged from 20.3% to 50.8% for tri- to hepta-BDEs, and from 5.1% to 13.9% for BDE209 in dust fractions of varied particle size. The bioaccessibility of most PBDE congeners decreased with increasing dust particle size. The way of being of PBDE (adsorbed to dust surface or incorporated into polymers) in dust significantly influenced the bioaccessibility. There was a significant negative correlation between the tri- to hepta-BDE bioaccessibility and organic matter (OM) contents in dust. Furthermore, tri- to hepta-BDE bioaccessibility increased with increasing polarity of OMs, while with decreasing aromaticity of OMs. The tri- to hepta-BDE bioaccessibility significantly positively correlated with the surface areas and pore volumes of dust. Using multiple linear regression analysis, it was found that the OM contents and pore volumes of dust were the most important factors to influence the tri- to hepta-BDE bioaccessibility and they could be used to estimate the bioaccessibility of tri- to hepta-BDEs according to the following equation: bioaccessibility (%) = 45.05 − 0.49 × OM% + 1.79 × pore volume. However, BDE209 bioaccessibility did not correlate to any of these factors.     

Hexabromocyclododecanes in limnic and marine organisms and terrestrial plants from Tianjin,China: Diastereomer- and enantiomer-specific profiles,biomagnification, and human exposure

To interpret the distribution of hexabromocyclododecanes (HBCDs) in various organisms, we measured the concentrations and diastereomer and enantiomer profiles of HBCDs in 21 different species of limnic and marine cohorts from Tianjin, China. The concentration ranges of HBCDs in limnic and marine organisms were 64.3–1111 ng g⁻¹ lw and 85.5–989 ng g⁻¹ lw, respectively. Living habitat and feeding habits had important impacts on HBCD diastereomer distribution. Most of the species appeared to preferentially select (+)-α-, (−)-β- and (−)-γ-HBCD. There is a tendency that the total and α-HBCDs were magnified as trophic level increased with trophic magnification factors (TMFs) around 2. The concentrations of HBCDs in the limnic and marine fishes were highest in the liver, followed by the gill, skin, and muscle. In terrestrial plants, the highest concentrations of HBCDs were observed in the leaf, followed by the root and the rhizosphere soil. Plants showed enantioselectivity for HBCD enantiomers, which varied with plant species and organs (leaf vs. root) of the same plant. Higher estimated daily intakes (EDIs) of HBCDs were observed from fish than from wheat.     

Effect of copper(II) on biodegradation of benzo[a]pyrene by Stenotrophomonas maltophilia

Benzo[a]pyrene (BaP) biodegradation by Stenotrophomonas maltophilia was studied under the influence of co-existed Cu(II) ions. About 45% degradation was achieved within 3 d when dealing with 1 mg L^?1 BaP under initial natural pH at 30 °C; degradation reached 48% in 2 d at 35 °C. Efficacy of BaP biodegradation reached the highest point at pH 4. In the presence of 10 mg L^?1 Cu(II) ions, the BaP removal ratio was 45% on 7th day, and maintained stable from 7 to 14 d at 30 °C under natural pH. The favorable temperature and pH for BaP removal was 25 °C and 6.0 respectively, when Cu(II) ions coexisted in the solutions. Experiments on cometabolism indicated that S. maltophilia performed best when sucrose was used as an additional carbon source. GC–MS analysis revealed that the five rings of BaP opened, producing compounds with one or two rings which were more bioavailable.     

Effective sorption of perfluorooctane sulfonate (PFOS) on hexadecyltrimethylammonium bromide immobilized mesoporous SiO2 hollow sphere

The hexadecyltrimethylammonium bromide (HDTMAB) immobilized hollow mesoporous silica spheres were prepared for the efficient removal of perfluorooctane sulfonate (PFOS) from aqueous solution. Besides the traditional sorption behavior including sorption kinetics as well as effect of solution pH and temperature, the effect of increasing volume which simulated the natural river where the rate of solute and solvent was relatively constant and solution volume was always changing was investigated. The result indicated that the residual PFOS concentrations in aqueous phase decreased with increasing solution pH and ionic strength, whereas they increased with increasing temperature. The HDTMAB immobilized material still maintained high efficiency after increasing volume, that is, the removal kept more than 99% after the treatment when the initial PFOS concentration was 1 mg L^?1. The uptake behavior and morphology of spheres which was characterized by transmission electron microscopy (TEM) revealed that the additional HDTMAB and mesoporous shell were responsible for the enhanced sorption of PFOS. It was concluded that electrostatic interaction and Ca-bridge role played an important role in the sorption of PFOS on the mesoporous SiO₂ hollow spheres, whereas, hydrophobic interaction contributed to the nice sorption performance of PFOS on the HDTMAB immobilized sorbent.     

响应面法和神经网络优化Acinetobactersp．DNS32发酵基质

为了提高阿特拉津降解菌Acinetobactersp．DNS32的产量,分别采用响应曲面法和基于人工神经网络的遗传算法对阿特拉津降解菌DNS32发酵培养基中3个重要基质成分（玉米粉、豆饼粉、K：HPO。）进行优化研究。响应曲面法确定3种成分的含量为玉米粉39．494g／L,豆饼粉25．638g／L和K。HPO。3．265g／L时,预测发酵活菌最大生物量为7．079×10^8CFU／mL,实测量为7．194×10^8CFU／mL;人工神经网络结合遗传算法优化确定3种主要成分含量为玉米粉为39．650g／L,豆饼粉为25．500g／L,K2HPO4为2．624g／L时,预测最大值为7．199×10^8CFU／mL,实测量为7．244×10。CFU／mL;最终确定培养基配方：玉米粉为39．650g／L,豆饼粉为25．500g／L,K2HPO4为2．624g／L,CaCO3为3．000g／L,MgSO4·7H2O和NaCl均为0．200g／L;优化后阿特拉津降解菌DNS32发酵生物量比优化前提高了36．6％。结果表明,在阿特拉津降解菌DNS32发酵培养基组分优化方面,响应面法和基于人工神经网络的遗传算法都是可行的,基于人工神经网络的遗传算法具有更好的拟合度和预测准确度。     

有机污染胁迫对人工湿地中浮萍抗氧化系统的影响

湿地植物在处理高负荷有机废水时会受到不同程度的氧化胁迫。本研究基于对浮萍的有机污染胁迫模拟系统,通过对浮萍脂质过氧化和抗氧化防御系统的监测与分析,研究了浮萍对有机污染胁迫的耐受能力及胁迫去除后浮萍的恢复规律。结果表明,浮萍对有机污染胁迫具有较高的耐受性,在胁迫去除后,具有一定的恢复能力。在COD小于400mg/L时,浮萍并未受到氧化胁迫;当COD达到800 mg/L时,浮萍体内ROS含量上升,细胞膜脂过氧化加剧,但抗氧化酶活性升高,抗氧化物质含量增加,浮萍可保持生长,胁迫去除后,抗氧化防御系统可恢复到对照水平;当COD过高（≥1 000mg/L）,ROS急剧上升,抗氧化防御系统遭受破坏,造成不可逆伤害,胁迫去除后不能恢复正常生长。     

天然黄铁矿的除磷性能

除磷是控制水体富营养化的重要手段。为了考察黄铁矿的除磷特征,采用序批实验,分别研究了反应时间、初始磷浓度和干扰离子（NH4＋、NO3- 和SO24-）对黄铁矿除磷的影响。动力学表明,黄铁矿的除磷过程符合伪二级动力学模型。pH=6．5时,磷的平衡去除量为6．82mg／kg。Langmuir方程能较好描述黄铁矿除磷的吸附等温过程,其磷的饱和吸附量为11．01mg／kg。NH4＋、NO3-和SO24- 对黄铁矿除磷基本没有影响。磷的去除主要是通过铁磷沉淀和铁氧化物及氢氧化物的吸附,去除的磷主要以可被生物利用的Fe、Al-P形态存在。黄铁矿的这些除磷性能和机制对选取黄铁矿作为人工湿地填料实现同步脱氮除磷具有重要指导作用。     

废LCD面板有机材料水热资源化产乙酸

LCD面板主要由附着偏光片及液晶等有机材料的玻璃面板构成。有机材料的去除及资源化利用是废LCD面板处理的第一步。在水热条件下对废LCD面板进行了降解产酸研究。研究考察了反应温度、反应时间、氧化剂用量、水用量及pH值等对水热产乙酸产率及选择性的影响。通过正交实验确定了水热产乙酸的最佳操作条件：反应温度325℃,反应时间5min,氧化剂（30％H2O2）0．6mL,用水量2mL,近中性环境（pH6-6．5去离子水）。此条件下,乙酸产率及选择性分别为68．83％及70．56％。结果表明,以废LCD面板有机材料为原料,采用水热技术进行产乙酸反应,可实现其资源化再利用。