3种含铁材料对重金属和砷复合污染底泥稳定化处理

选用3种含铁材料FeCl3、Fe(OH)3和FePO4,开展重金属和砷(As)复合污染底泥的稳定化处理实验,并用毒性浸出测试(TCLP)的结果和底泥交换态重金属(Pb、Cd、Cu、Zn)及As的含量来评价其稳定化效果。结果表明,(1)FeCl3和FePO4降低了底泥pH值,Fe(OH)3轻微地提高了底泥pH值。(2)FeCl3活化了底泥中Pb、Cd、Cu、Zn,使其浸出量和交换态含量增加,对As浸出量的影响不大,但使底泥中As交换态含量明显降低,且在最大添加量(8.00 g/kg)时As交换态含量未检测出;Fe(OH)3降低了Cd交换态和浸出量,稍增加了As交换态和浸出量,但对Pb、Cu、Zn交换态和浸出量影响不明显;FePO4明显降低了Pb的浸出量和交换态含量,略微降低了交换态Cd、Zn含量,对交换态Cu影响不大,但明显增加了As的浸出量和交换态含量。综上,FeCl3对As具有较好的稳定化效果,但明显活化了底泥中的4种重金属;Fe(OH)3亦对底泥中Cd有一定稳定化效果;FePO4对Pb的稳定化效果较好,但明显活化了底泥中的As。显然,3种含铁材料都不能实现底泥中重金属和As的同时稳定化。     

SBR-混凝沉淀处理织棉漂白废水研究

研究了SBR－混凝沉淀工艺对织棉漂白废水的处理效果，结果表明，进水CODcr为1060mg/L，经SBR工艺处理，CODcr去除率达到79％。以聚铁－PAM作后续处理，可进一步把CODcr降到100mg/L以下，并能有效去除色度，去除度达94％，出水达到排放标准。该工艺是一种经济有效的可行方法。     

环境影响综合评价的灰色关联分析方法

设想理想环境系统,以实际环境系统及其子系统与理想环境系统关系密切的程度作为指标,通过灰色关联分析的具体手段提出了一个解决问题的新方法一环境影响综合评价的灰色关联分析方法,并在东江水电工程的环境影响评价中得到应用。结果是建库前环境（序列）与理想环境（序列）的关联度r₁₀小于建库后的环境（序列）与理想环境（序列）的关联度r₁₀,工程对环境影响的定量为r₂₀r₁₀＝0.122,即工程使环境总体向理想环境发展了12.2%。如何确定理想环境序列是该方法的关键。     

湖南省城镇生活垃圾总量预测研究

结合在社会系统中有一定应用的耗散结构理论的有关思想、方法和研究成果，对湖南省城镇生活垃圾总量进行建模预测，实际应用结果表明该模型具有结构简单、适用性强的特点，且预测值与实际值吻合较好。     

Effect of photosensitizer riboflavin on the fate of 2,4,6-trinitrotoluene in a freshwater environment

The effect of riboflavin (1 microM) on the fate of TNT (20 mg/l) in a natural water environment was studied. The relative contribution of photolysis, microbial assemblages and freshwater matrix to TNT degradation was examined. The rates, extent and products of TNT and riboflavin transformation were compared under different experimental conditions. It was found that riboflavin significantly enhanced the degradation of TNT in natural water environment. Thus it is a potentially useful photosensitizing agent for the treatment of TNT-contaminated surface water. Furthermore, in the presence of riboflavin, two new intermediates with max. absorption wavelength of 230 nm were found, demonstrating that transformation of TNT in the presence of riboflavin undergoes different pathways.     

Degradation kinetics and mechanism of trace nitrobenzene by granular activated carbon enhanced microwave/hydrogen peroxide system

The kinetics of the degradation of trace nitrobenzene (NB) by a granular activated carbon (GAC) enhanced microwave (MW)/hydrogen peroxide (H₂O₂) system was studied. Effects of pH, NB initial concentration and tert-butyl alcohol on the removal efficiency were examined. It was found that the reaction rate fits well to first-order reaction kinetics in the MW/GAC/H₂O₂ process. Moreover, GAC greatly enhanced the degradation rate of NB in water. Under a given condition (MW power 300 W, H₂O₂ dosage 10 mg/L, pH 6.85 and temperature (60±5)℃), the degradation rate of NB was 0.05214 min^-1 when 4 g/L GAC was added. In general, alkaline pH was better for NB degradation; however, the optimum pH was 8.0 in the tested pH value range of 4.0-12.0. At H₂O₂ dosage of 10 mg/L and GAC dosage of 4 g/L, the removal of NB was decreased with increasing initial concentrations of NB, indicating that a low initial concentration was beneficial for the degradation of NB. These results indicated that the MW/GAC/H₂O₂ process was effective for trace NB degradation in water. Gas chromatography-mass spectrometry analysis indicated that a hydroxyl radical addition reaction and dehydrogenation reaction enhanced NB degradation.     

废弃铅锌冶炼厂重金属污染场地的健康风险评价

通过对广西某废弃铅锌冶炼厂区进行布点采样、监测分析,选取Cu、Pb、Zn、Cd、Cr、As六种重金属元素作为评价因子,对污染场地进行健康风险评价.结果显示,指数评价法表明厂区污染状况为废渣＞＞建筑垃圾＞土壤,Cd ＞Zn ＞As ＞Pb ＞Cu＞ Cr,土壤受到中度污染,废渣和建筑垃圾受到重度污染.健康风险评价法表明土壤、废渣和建筑垃圾的危害商分别为2.032、13.891、2.975,非致癌危害废渣＞＞建筑垃圾＞土壤;Cu、Zn、Cr、Cd、As的危害商分别为0.053、0.118、0.184、7.001、11.542,非致癌危害As ＞Cd ＞Cr＞Zn ＞Cu.土壤、废渣和建筑垃圾的致癌风险分别为5.387E-04、7.954E-04、2.455E-04,致癌危害废渣＞土壤＞建筑垃圾;As、Cd、Cr的致癌风险分别为5233E-04、2.400E-05、1.032E-03,致癌危害Cr＞As ＞Cd.综上,人体健康危害废渣＞建筑垃圾＞土壤,主要危害元素为As、Cd、Cr.     

包装印刷的环境性能及绿色化对策探讨

绿色环保已成为新世纪的发展主题，包装印刷的绿色化问题已成为阻碍包装印刷工业持续发展的大问题。对此，在研究了现行各种包装印刷技术的环境性能，及包装印刷材料中油墨的环境性能的基础上，从总体上探讨了包装印刷绿色化五个方面的发展对策：发展无醇印刷和无水胶印技术，发展环保柔性版印刷技术，发展环保油墨，发展直接制版技术(CTP)和数字化印刷技术，发展废弃物处理技术。     

宏量和微量元素在炉内喷钙脱硫过程中的作用

研究添加粉煤灰对脱硫过程的作用,实验在滴管炉上进行,温度为１２００℃,结果表明,一些宏量元素的金属氧化物对脱硫过程具有催化作用,但这种催化作用随Ｆｅ２Ｏ３掺加量的改变而变化,先升高后降低,有一个最佳值;一些微量元素的金属氧化物对脱硫过程更强的催化氧化作用,当ＭｎＯ２的掺加量为３％时,充效率提高近１倍。