An Approach for Evaluating the Effectiveness of Various Ozone Air Quality Standards for Protecting Trees

We demonstrate an approach for evaluating the level of protection attained using a variety of forms and levels of past, current, and proposed Air Quality Standards (AQSs). The U.S. Clean Air Act requires the establishment of ambient air quality standards to protect health and public welfare. However, determination of attainment of these standards is based on ambient pollutant concentrations rather than prevention of adverse effects. To determine if a given AQS protected against adverse effects on vegetation, hourly ozone concentrations were adjusted to create exposure levels that “just attain” a given standard. These exposures were used in combination with a physiologically-based tree growth model to account for the interactions of climate and ozone. In the evaluation, we used ozone concentrations from two 6-year time periods from the San Bernardino Mountains in California. There were clear differences in the level of vegetation protection achieved with the various AQSs. Based on modeled plant growth, the most effective standards were the California 8-hr average maximum of 70 ppb and a seasonal, cumulative, concentration-weighted index (SUM06), which if attained, resulted in annual growth reductions of 1% or less. Least effective was the 1-hr maximum of 120 ppb which resulted in a 7% annual reduction. We conclude that combining climate, exposure scenarios, and a process-based plant growth simulator was a useful approach for evaluating effectiveness of current or proposed air quality standards, or evaluating the form and/or level of a standard based on preventing adverse growth effects.     

Are EMS environmentally effective? The link between environmental management systems and environmental performance in European companies

Based on the analysis of a large dataset on the environmental performance of European companies in five industrial sectors, this paper examines the question of whether the presence of an environmental management system (EMS) has a positive impact on the eco-efficiency of companies. It begins with a review of evidence about the link between EMS and environmental performance in business organisations, finding that, despite much research, there is still little quantitative evidence. The second part of the paper uses three independent statistical methods (simple correlations, Jaggi-Freedman indices and a ‘trend differences’ approach) to assess whether companies and production sites with EMS perform better than those without and whether performance improves after an EMS has been introduced. The paper shows that there is currently no evidence that EMS have a consistent and significant positive impact on environmental performance. Policy action based on the simple assumption that companies with an EMS perform better than those without therefore seems inappropriate.     

Effects of Riparian Vegetation and Watershed Urbanization on Fishes in Streams of the Mid‐Atlantic Piedmont (USA)1

Abstract: The joint influences of riparian vegetation and urbanization on fish assemblages were analyzed by depletion sampling in paired forested and nonforested reaches of 25 small streams along an urbanization gradient. Nonforested reaches were narrower than their forested counterparts, so densities based on surface area differ from linear densities (based on reach length). Linear densities (based on number or biomass of fish) of American eel, white sucker and tesselated darter, and the proportion of biomass of benthic invertivores were significantly higher in nonforested reaches, while linear densities of margined madtom and the number of pool species were significantly higher in forested reaches. Observed riparian effects may reflect differences in habitat and algal productivity between forested and nonforested reaches. These results suggest that relatively small‐scale riparian restoration projects can affect local geomorphology and the abundance of fish. Dense vegetative cover in riparian zones and similar or analogous habitats in both forested and nonforested reaches, the relatively small scale of the nonforested reaches, and the low statistical power to detect differences in abundance of rare species may have limited the observed differences between forested and nonforested reaches. There was a strong urbanization gradient, with reductions of intolerant species and increases of tolerant species and omnivores with increasing urbanization. Interactions between riparian vegetation type and urbanization were found for blacknose dace, creek chub, tesselated darter, and the proportion of biomass of lithophilic spawners. The study did not provide consistent support for the hypotheses that responses of fish to riparian vegetation would be overwhelmed by urban degradation or insignificant at low urbanization.     

Characterizing Storm Hydrograph Rise and Fall Dynamics With Stream Stage Data1

Abstract: Storm‐flow transients (i.e., hydrograph rise and fall dynamics) may represent an important aspect of understanding streamflow dynamics. However, little is known about how temporal resolution of transient data and climate variability may color these potential indicators of hydrologic pattern or condition. Warm‐season stream stage and rainfall were monitored continuously (5 min) during the 2002 water year in eight tributaries of the Little Miami River (Ohio), which drain 17‐58 km² catchments. Rise rates generated using 5‐min data were different than those generated with mean daily data [calculated with the Indicators of Hydrologic Alteration (IHA) software], though fall rates were similar for fine and coarse temporal data. This result suggests that data with low temporal resolution may not be adequate to fully represent the dynamics of storm rise rates. Conversely, fall rates based on daily stage data (via IHA) were similar to those based on the 5‐min data, and so daily mean data may be appropriate for characterizing fall rates. We next analyzed the possible correlations between rainfall variability and storm‐flow stage dynamics. We derived rise and recession rates from storm stage hydrographs by assuming exponential rise and decay of a runoff peak. We found that raw rise rates (R_raw) were correlated with both the maximum rainfall rate and the time to the centroid of a rain event. We subsequently removed the trend based on these rainfall characteristics, which yielded new representations of rise rates abbreviated as R_rate and R_tcent, respectively, and that had lower variability than the uncorrected (raw) data. Fall rates were found to be independent of rainfall characteristics. Due to the predominant influence of stream hydrology upon aquatic biota and nutrient fluxes, our work suggests that these stage data analysis protocols can refine or otherwise reduce variability in these indices by accounting for relevant factors such as rainfall forcing. These protocols for derivation of transient indices should be tested for their potential to improve correlations between stream hydrology and temporally aligned biotic data and dissolved nutrient fluxes in streams.     

Exploratory Analysis of the Winter Chemistry of Five Lakes on the North Slope of Alaska1

Abstract: Lakes are important water resources on the North Slope of Alaska. Freshwater is required for oilfield production as well as exploration, which occurs largely on ice roads and pads. Since most North Slope lakes are shallow, the quantity and quality of the water under ice at the end of winter are important environmental management issues. Currently, water‐use permits are a function of the presence of overwintering fish populations, and their sensitivity to low oxygen concentrations. Sampling of five North Slope lakes during the winter of 2004‐2005 shed some light on the winter chemistry of four lakes that were used as water supplies and one undisturbed lake. Field analysis was conducted for oxygen, conductivity, pH, and temperature throughout the lake depth, as well as ice thickness and water depth. Water samples were retrieved from the lakes and analyzed for Na, Ca, K, Mg, Fe, dissolved‐organic carbon, and alkalinity in the laboratory. Lake properties, rather than pumping, were the best predictors of oxygen depletion, with the highest dissolved‐oxygen levels maintained in the lake with the lowest concentration of constituents. Volume weighted mean dissolved‐oxygen concentrations ranged from 4 to 94% of saturation in March. Dissolved oxygen and specific conductance data suggested that the lakes began to refresh in May.     

Development of a black carbon-inclusive multi-media model: application for PAHs in Stockholm

A multi-media model was developed for predicting the fate of organic chemicals in the Greater Stockholm Area, Sweden, and applied to selected polycyclic aromatic hydrocarbons (PAHs). Although urban models have been previously developed, this model is novel in that it includes sorption to pyrogenically-derived particles, commonly termed "black carbon" (BC), within the model structure. To examine the influence of BC sorption on environmental fate of PAHs, two versions of the model were generated and run: one in which sorption to BC was included and one in which BC sorption was excluded. The inclusion of BC sorption did not cause any significant variations to air levels, but it did cause an average 20-30% increase in sediment concentrations related to increased sediment solids partitioning. The model also predicted reduced advective losses out of the model domain, as well as chemical potential to diffuse from sediments, whilst total chemical inventory increased. In all cases, the lighter PAHs were more affected by BC inclusion than their heavier counterparts. We advocate the addition of sorption to BC in future multi-media fate and exposure models, which as well as influencing fate will also alter (lower) chemical availability and, thus, wildlife exposure to hydrophobic chemicals. A quantification of the latter was derived with the help of the soot-inclusive model version, which estimated a lowering of dissolved water concentrations between five and >200 times for the different PAHs of this study.     

Levels of PCDDs, PCDFs and dioxin-like PCBs in raw cow's milk collected in France in 2006

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) as well as polychlorinated biphenyls (PCBs) are widespread environmental contaminants. A French national survey was carried out in April 2006 to assess the concentrations of PCDD/Fs and dioxin-like PCBs (DL-PCBs) in raw cow's milk. A random sampling scheme stratified by region was applied to collect 239 raw milk samples from 93 plants belonging to 17 dairy companies. Compared to a previous survey led in 1998 analyzing half-skimmed drinking milk in France, the PCDD/Fs level was cut by half, with an average concentration of 0.33 pg toxic equivalent (TEQ)/g fat in 2006. The mean DL-PCBs concentration was 0.57 pg TEQ/g fat and subsequently the sum of PCDD/Fs and DL-PCBs was 0.90 pg/g fat, values below the thresholds defined by the European Union regulations.     

Polychlorinated biphenyls (PCBs) and hydroxy-PCBs in adipose tissue of women in Southeast Spain

Polychlorinated biphenyls (PCBs) and hydroxylated PCBs (OH-PCBs) were investigated in human adipose tissue samples collected from 20 women undergoing surgery. Mean sum of PCB and sum of OH-PCB levels were 737ng/g of lipid and 8pg/g of lipid, respectively. Among PCBs, congeners 180, 153, 138 and 170 were the most frequent and abundant, and together constituted 72% of the total amount of PCBs in adipose tissue. The PCB congener pattern and the frequencies and concentrations of non-dioxin-like and non-hydroxylated congeners observed in adipose tissue were similar in distribution and order of magnitude to the profile previously published in Spain but lower than that found in other European countries. Among OH-PCB congeners studied, 4-OH-PCB 107/118 was found at the highest concentrations followed by 3'-OH-PCB 180 and 3-OH-PCB 138. To date, no information on levels of PCB metabolites in the Spanish population is available for comparison. These three predominant OH-PCBs contributed 97% of all OH-PCBs. Twelve dioxin-like PCBs contributed around 8% of the total PCB exposure, and all were present in all study subjects. Further research is required to determine trends in human exposure to PCBs and OH-PCBs and how existing banning measures affect exposure.     

Comparison of two reference black carbons using a planar PCB as a model sorbate

In studies assessing sorption of hydrophobic organic compounds (HOCs) in natural systems, the choice of an appropriate reference black carbon, which can represent environmental black carbon (BC), is essential. This study compared isotherms of two commonly available and distinct reference BCs (n-hexane soot (BCRM) and diesel particulate matter (SRM 2975)) and a natural sediment from a source with little black carbon (Lake Hartwell, SC) using 3,3',4-trichlorobiphenyl (IUPAC #35) as a model sorbate. There was greater sorptivity for PCB-35 by BCRM than by SRM 2975. The observed differences in sorption between the two reference black carbons for PCB-35 may be ascribed to the different chemical characteristics of the black carbons. Differences in pore volume distribution at <16A pore width are less likely to be responsible for the observed differences in sorption. The elemental analysis confirmed that BCRM was a pure n-hexane soot because only C, H and O were measured. In contrast, SRM 2975 also contained N and S and a higher O% than BCRM. Compared to the low BC sediment, the two reference BCs had greater pore volume distributions, surface areas, total pore volumes and sorption. The observed nF (i.e., Freundlich exponent) values for PCB indicated greater linearity of the isotherms for the natural sediment than for the reference black carbons. For designing studies of sorption of HOCs in natural systems, in particular, when PCBs are contaminants of concern, results of this study can aid selection of the appropriate reference BCs.