Heavy metals detection in river water with cantilever nanobiosensor

Abstract

Heavy metals can be highly toxic depending on the dose and the chemical form. In this context, sensing devices such as nanobiosensors have been presented as a promising tool to monitor contaminants at micro and nanoscale. In this work, cantilever nanobiosensors with phosphatase alkaline were developed and applied to detect heavy metals (Pb, Ni, Cd, Zn, Co, and Al) in river water. The nanobiosensor surface was functionalized by the self-assembled monolayers (SAM) technique using 16-mercaptohexadecanoic acid, N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) and N- hydroxysuccinimide (NHS), and phosphatase alkaline enzyme. The sensing layer deposited on the cantilever surface presented a uniform morphology, at nanoscale, with 80?nm of thickness. The nanobiosensor showed a detection limit in the ppb range and high sensitivity, with a stability of fifteen days. The developed cantilever nanobiosensor is a simple tool, suitable for the direct detection of contaminants in river water.     

Cork stoppers as an effective sorbent for water treatment: the removal of mercury at environmentally relevant concentrations and conditions

The technical feasibility of using stopper-derived cork as an effective biosorbent towards bivalent mercury at environmentally relevant concentrations and conditions was evaluated in this study. Only 25 mg/L of cork powder was able to achieve 94 % of mercury removal for an initial mercury concentration of 500 μg/L. It was found that under the conditions tested, the efficiency of mercury removal expressed as equilibrium removal percentage does not depend on the amount of cork or its particle size, but is very sensitive to initial metal concentration, with higher removal efficiencies at higher initial concentrations. Ion exchange was identified as one of the mechanisms involved in the sorption of Hg onto cork in the absence of ionic competition. Under ionic competition, stopper-derived cork showed to be extremely effective and selective for mercury in binary mixtures, while in complex matrices like seawater, moderate inhibition of the sorption process was observed, attributed to a change in mercury speciation. The loadings achieved are similar to the majority of literature values found for other biosorbents and for other metals, suggesting that cork stoppers can be recycled as an effective biosorbent for water treatment. However, the most interesting result is that equilibrium data show a very rare behaviour, with the isotherm presenting an almost square convex shape to the concentration axis, with an infinite slope for an Hg concentration in solution around 25 μg/L.     

Mediterranean Coastal Sand Dune Vegetation: Influence of Natural and Anthropogenic Factors

The aim of the present work was to assess the conservation status of coastal dune systems in Tuscany (Italy). Emphasis was given to the presence and abundance of plant communities identified as habitat in accordance with the Directive 92/43/EEC. Twenty transects perpendicular to the shoreline were randomly positioned on the whole coastal area (30 km in length) in order to sample the full spectrum of plant communities. Vegetation zonation and relationships with the most frequent disturbance factors in the study area—beach cleaning, coastline erosion, presence of paths and roads, bathing settlements and trampling—were investigated through principal coordinate analysis and canonical correspondence analysis. Natural factors, such as distance from the sea and total length, were also considered. Differences in the conservation status of the sites were found, ranging from the total disappearance of the foredune habitats to the presence of the complete psammophilous (sand-loving) plant communities. Erosion, trampling, and paths were found to be closely correlated with degradation and habitat loss. Furthermore, the overall plant species diversity of dunes was measured with NH_Dune, a modified version of the Shannon index; while the incidence of invasive taxa was calculated using N, a naturalness index. However, these diversity indices proved to be a weaker bioindicator of ecosystem integrity than habitat composition along transects. A possible strategy for the conservation and management of these coastal areas could be to protect the foredunes from erosion and limit trampling through the installation of footbridges or the use of appropriate fences.     

Analyses of platinum group elements in mosses as indicators of road traffic emissions in Austria

The concentrations of platinum group elements (PGE; platinum, palladium, rhodium) and 17 other elements in mosses growing at 32 sampling sites along 12 roads in Austria were analysed. The study included passive monitoring of naturally growing mosses with an experimental design using mosses samples exposed in a tunnel experiment. PGEs (Pt, Pd, Rh) were analysed by ICP-MS (ELAN DRC II, Perkin Elmer SCIEX) according to EN ISO 17294-2 Tl.29. Mean concentrations of PGEs in five moss species were: Pt 7.07±9.97, Pd 2.8±5.2 und Rh 0.6±0.8 ng g⁻¹ dry weight. This is comparable to data derived from measurements of gasoline autocatalyst emissions or airborne particles (<10 μm). Compared to soils and road dust along highways, concentrations in mosses were lower by a factor of ten, compared to grasses they were comparable or somewhat higher. The ratios between the various PGEs were calculated as follows (mean values): Pt/Pd 7.9±10.2, Pt/Rh 12.6±8.3 and Pd/Rh 3.7±2.2. The number of light duty vehicles (<3.5 t) and the distance from the road were the main influential factors for PGE concentrations. Especially strong correlations could be found between Pt and Sb, Cu, Zn, and Cd (in decreasing order), which are all elements derived mainly from road traffic emissions. Cluster analysis (Partioning Around Medoids Method) separated elements derived mainly from soil dust (Ca, Al). An analysis of spatial deposition patterns of PGEs showed a reciprocal decrease of concentrations with increasing distance from the road, reaching background values at distances between 10 and 200 m, sometimes even more, but outside the spatial range of our investigation.     

Some characteristics of a plume from a point source based on analytical solution of the two-dimensional advection–diffusion equation

The moments of the concentration distribution obtained using a recent analytical solution of the steady-state two-dimensional advection–diffusion equation are presented. The solving methodology is the Generalized Integral Laplace Transform Technique, which allows obtaining a reliable solution of the advection–diffusion equation without any restrictive assumption about the eddy diffusivity coefficients and wind speed profiles. The first four moments and value and position of maximum ground level concentration are calculated. The concentration standard deviation is compared against the semi-empirical ones used in operative Gaussian models.