Worker drift and egg dumping by queens in wild Bombus terrestris colonies

Wild bumblebee colonies are hard to find and often inaccessible, so there have been few studies of the genetic structure of bumblebees within natural colonies, and hence, it is not clear how frequently events such as worker reproduction, worker drift and queen usurpation take place. This study aimed to quantify the occurrence of natal-worker reproduction, worker drift and drifter reproduction within 14 wild colonies of Bombus terrestris in Central Scotland. Four unlinked microsatellites were used to identify patterns of relatedness of the colonies’ adults and broods. In colonies with queens (queenright colonies), worker reproduction accounted for just 0.83 % of males, increasing to 12.11 % in queenless colonies. Four colonies contained a total of six workers which were not daughters of the queen, and were assumed to be drifters, and four male offspring of drifters. Drifting is clearly not common and results in few drifter offspring overall, although drifters produced approximately seven times more offspring per capita than workers that remained in their natal colony. Unexpectedly, two colonies contained clusters of sister workers and juvenile offspring that were not sisters to the rest of the adults or brood found in the colonies, demonstrating probable egg dumping by queens. A third colony contained a queen which was not a sister or daughter to the other bees in the colony. Although usurping of bumblebee colonies by queens in early season is well documented, this appears to be the first record of egg dumping, and it remains unclear whether it is being carried out by old queens or newly mated young queens.     

Identification of metal toxicity in sewage sludge leachate

Sewage sludge is a source of organic matter and nutrients with the potential for being used as a fertilizer. However, metals in sewage sludge might accumulate in soil after repeated sludge applications, and metal concentrations might reach concentrations that are toxic to microorganisms, soil organisms and/or plants. This toxicity might change with time due to kinetic factors or abiotic factors such as freezing, drying or rainfall. The objective of this study was to determine toxicity of sewage sludge leachate from a lysimeter with 50 cm of sludge applied. Attempts were also made to identify the cause of toxicity of the sludge leachate by toxicity identification and evaluation (TIE) techniques. Sludge leachate was collected monthly during 1 experimental year (August 2001 to August 2002). Metal concentrations were analysed, and the toxicity was determined with Daphnia magna (48-h immobility). The effect of EDTA or sodium thiosulphate addition, filtration through a CM-resin or a Millex-resin on toxicity was also tested. The results showed that toxicity of the sludge leachate apparently varied during the year, and that filtration through the CM-resin reduced most of the toxicity followed by the addition of EDTA. None of the other treatments reduced the toxicity of the sludge leachate. This indicated that one or more metals were responsible for the observed toxicity. Further calculations of toxic units (TU) suggested that Zn contributed most to the toxicity. Results also indicated that Ca concentrations in the sludge leachate reduced the toxicity of Zn.     

Towards a contraction and convergence target based on population life expectancies since 1960

This paper explores a finding that emerged in the early phases of a multidisciplinary project applying population health and psychology to issues of social progress and sustainability. Across 180 countries and half a century of data, the levels of carbon emissions per capita that maximise life expectancy fall within a tight band averaging only 6.6 tonnes—considerably less than wealthier countries emit per person. Various tests fail to break down the curves and, although the authors remain cautious, the stability since 1960 offers implications for the carbon budget leading up to 2050. This is the first time these curves have been contextualised against established climate science, with timely implications for international negotiations on sustainability and development.     

An Interpretive Study of Yosemite National Park Visitors’ Perspectives Toward Alternative Transportation in Yosemite Valley

The National Park Service (NPS) is increasingly focusing on alternative transportation systems in national parks to address environmental and social problems arising from a historical reliance on personal automobiles as the primary means of visitor access. Despite the potential advantages, alternative transportation may require a reorientation in the way that Americans have experienced national parks since the advent of auto-tourism in the early twentieth century. Little research exists, however, on visitor perspectives towards alternative transportation or the rationale underlying their perspectives. It remains unclear how transportation systems affect visitors’ experiences of the park landscape or the factors influencing their travel behavior in the parks. This report presents an interpretive study of visitor perspectives toward transportation management in the Yosemite Valley area of Yosemite National Park, California. Qualitative analysis of 160 semi-structured interviews identified individual psychological factors as well as situational influences that affect visitors’ behavior and perspectives. Individual psychological factors include perceived freedom, environmental values and beliefs, prior experience with Yosemite National Park and other national parks, prior experience with alternative transportation in national parks, and sensitivity to subjective perceptions of crowding. Situational factors included convenience, access, and flexibility of travel modes, as well as type of visit, type of group, and park use level. Interpretive communication designed to encourage voluntary visitor use of alternative transportation should focus on these psychological and situational factors. Although challenges remain, the results of this study suggest approaches for shaping the way Americans visit and experience their national parks to encourage environmental sustainability.     

Tool wear of coated drills in drilling CFRP

This study aimed to investigate the wear of certain coated drills when drilling carbon fiber reinforced composites (CFRP). Three different drills were used in the drilling experiments: uncoated, diamond coated and AlTiN coated carbide (WC–Co) drills. The tool wear in CFRP machining was quite different from that in conventional metal machining. The primary wear type was a dulling or blunting of the cutting edge, which has been referred to as edge rounding wear or edge recession. In this paper, a hypothesis has been developed to explain the edge rounding wear in CFRP machining. Due to the fracture-based chip formation of CFRP, there is lack of the work material stagnation zone in front of the cutting edge, which normally prevents the edge wear in metal machining. Series of wear lead to rapid dulling of the cutting edge. The resistance to edge rounding wear on the coated as well as uncoated drills has been investigated. The diamond coating significantly reduces the edge rounding wear. However, AlTiN coated drills showed no visible improvement over the uncoated carbide drill, despite of their high hardness, thus not protecting the drill. The wear mechanisms of the uncoated carbide drill and coatings are discussed. It is believed that the 2-body and 3-body abrasive wear fail to explain the observed tool wear in CFRP drilling. However, the wear of the coatings and uncoated carbide substrate from tribo-meter tests correlated well with the tool wear in the CFRP drilling. Therefore, the tribo-meter test can be used to screen the prospective tool materials before carrying drilling experiment.     

Arsenic accumulation in native plants of West Bengal, India: prospects for phytoremediation but concerns with the use of medicinal plants

Arsenic (As) is a widespread environmental and food chain contaminant and class I, non-threshold carcinogen. Plants accumulate As due to ionic mimicry that is of importance as a measure of phytoremediation but of concern due to the use of plants in alternative medicine. The present study investigated As accumulation in native plants including some medicinal plants, from three districts [Chinsurah (Hoogly), Porbosthali (Bardhman), and Birnagar (Nadia)] of West Bengal, India, having a history of As pollution. A site-specific response was observed for Specific Arsenic Uptake (SAU; mg kg(-1) dw) in total number of 13 (8 aquatic and 5 terrestrial) collected plants. SAU was higher in aquatic plants (5-60 mg kg(-1) dw) than in terrestrial species (4-19 mg kg(-1) dw). The level of As was lower in medicinal plants (MPs) than in non-medicinal plants, however it was still beyond the WHO permissible limit (1 mg kg(-1) dw). The concentration of other elements (Cu, Zn, Se, and Pb) was found to be within prescribed limits in medicinal plants (MP). Among the aquatic plants, Marsilea showed the highest SAU (avg. 45 mg kg(-1) dw), however, transfer factor (TF) of As was the maximum in Centella asiatica (MP, avg. 1). Among the terrestrial plants, the maximum SAU and TF were demonstrated by Alternanthera ficoidea (avg. 15) and Phyllanthus amarus (MP, avg. 1.27), respectively. In conclusion, the direct use of MP or their by products for humans should not be practiced without proper regulation. In other way, one fern species (Marsilea) and some aquatic plants (Eichhornia crassipes and Cyperus difformis) might be suitable candidates for As phytoremediation of paddy fields.     

A rapid method for determination of Aroclor 1260 in cattle adipose tissue

Abstract

A simple analytical procedure for the determination of Aroclor 1260 in cattle adipose tissue is described. The polychlorinated biphenyls residues are extracted from the tissue using a soxhlet extractor and the extracts are cleaned up using a florisil SEP‐PAK cartridge. The residues are detected using a gas chromatograph equipped with an electron capture detector. The effect of extraction time of the Aroclor 1260 residues from the tissue has been investigated and a period of four hours is found to give satisfactory percent recoveries. Greater than 85 percent recoveries were obtained from adipose tissue spiked with Aroclor 1260. The method can be used to detect Aroclor 1260 residue levels as low as 0.10 parts per million.

The method was used to analyze thirty‐one cattle adipose tissue samples out of which twenty‐six samples were taken from cattle suspected of exposure to a pasture containing electrical transformers and capacitors containing Aroclor 1260. Five control samples were collected from cattle with no known exposure. All twenty‐six samples were found to contain non‐detectable Aroclor 1260 residues.     

Importance of individual and environmental variation for invasive species spread: a spatial integral projection model

Plant survival, growth, and flowering are size dependent in many plant populations but also vary among individuals of the same size. This individual variation, along with variation in dispersal caused by differences in, e.g., seed release height, seed characteristics, and wind speed, is a key determinant of the spread rate of species through homogeneous landscapes. Here we develop spatial integral projection models (SIPMs) that include both demography and dispersal with continuous state variables. The advantage of this novel approach over discrete-stage spread models is that the effect of variation in plant size and size-dependent vital rates can be studied at much higher resolution. Comparing Neubert-Caswell matrix models to SIPMs allowed us to assess the importance of including individual variation in the models. As a test case we parameterized a SIPM with previously published data on the invasive monocarpic thistle Carduus nutans in New Zealand. Spread rate (c*) estimates were 34% lower than for standard spatial matrix models and stabilized with as few as seven evenly distributed size classes. The SIPM allowed us to calculate spread rate elasticities over the range of plant sizes, showing the size range of seedlings that contributed most to c* through their survival, growth and reproduction. The annual transitions of these seedlings were also the most important ones for local population growth (lambda). However, seedlings that reproduced within a year contributed relatively more to c* than to lambda. In contrast, plants that grow over several years to reach a large size and produce many more seeds, contributed relatively more to lambda than to c*. We show that matrix models pick up some of these details, while other details disappear within wide size classes. Our results show that SIPMs integrate various sources of variation much better than discrete-stage matrix models. Simpler, heuristic models, however, remain very valuable in studies where the main goal is to investigate the general impact of a life history stage on population dynamics. We conclude with a discussion of future extensions of SIPMs, including incorporation of continuous time and environmental drivers.