Polychlorinated -dibenzo-p-dioxins/furans and -dioxin-like biphenyls in eggs of common terns from lime island,St. Mary's river,Michigan, USA

Population collapse of common tern (Sterna hirundo) from Lime Island in the St. Mary's River, Michigan, USA were related to the 2,3,7,8-chlorine substituted dioxins, furans, dioxin-like PCBs, and other possible factors using unhatch egg target contaminant analysis. The most toxic congeners, 2,3,7,8-TCDD/DF was found in all samples at noticeable concentrations. Magnitude of sum 2,3,7,8-PCDD/DFs were within the range of 39–93?pg/g wet wt. Dioxin-like PCBs were within the range of 360–1230?ng/g wet wt. Great Toxic Equivalent Quantity (TEQ) contributions by 2,3,7,8-TCDF, 2,3,4,7,8-PeCDF, 2,3,7,8-TCDD, 1,2,3,7,8-PeCDD, and dioxin-like PCBs such as CB-77, CB-126 and CB-105 are considered greatly due to their influence of poor embryo development and consequent damage of embryos of common terns in egg injection studies. However, other organochlorines, heavy metals, and/or synergistic effects also taken in to account. On the whole, TEQs in the tern eggs were greater than the Lowest-Observable-Adverse Effect Level (LOAEL) for bald eagle (Haliaeetus leucocephalus) embryos observed in British Columbia, Canada. Concentrations of dioxin-like PCBs, dioxins, furans in the St. Mary's River food chain are at levels for concern for nesting colonial waterbirds. Eventually, the possible movements of analyzed chemicals downstream from a man-made flood event are discussed.     

The impact of bias in MoM values on patient risk and screening performance for Down syndrome

First and second trimester screening protocols for Down syndrome rely on marker values being referred to smoothed median values to produce adjusted multiple of the median (MoM) values to standardise for factors such as assay, gestation, maternal weight, smoking status, and so on. Changes in assay components, such as reagent lot, and inappropriate use of published regression equations for smoothed medians have resulted in biases in reported MoM values that in many applications remain uncorrected. This paper investigates the impact of these biases on patient-specific risk estimates and screening performance, and concludes that a 10% bias for an individual marker can result in an increase of between 1 and 2% in the false positive rate of the programme. A simple formula is also derived that enables the impact of these biases to be determined without the need for simulation, thus making it easier to design effective statistical quality control procedures to monitor the output of screening software algorithms. Objective To determine the impact of bias in MoM values on detection rates, false positive rates and patient-specific risks for Down syndrome. Methods We show that bias in MoM values affects risk through a multiplicative factor, and present an approximation to estimate this factor. We then show how bias in MoM values changes the effective risk threshold in the screening test, and hence the test's performance characteristics are determined by reference to a different point on the ROC curve for that test. Our approximation is based on the assumption of equal variance covariance structure for the unaffected and T21 log MoM values. We demonstrate, using computer simulation and supportive theoretical results, that the approximation is reliable in situations encountered in practice. Applications of the approximation are also discussed in respect of establishing effective quality control rules for median MoMs. Results Substantial changes in patient risk estimates and overall screening performance can result from the sort of biases in marker MoM values encountered in routine practice. In particular, biases of 10% in individual median marker MoM values can produce a four-fold range of risks when using the triple test. A 10% bias in a single marker will change the false positive rates by up to 2%. The effects on the false positive rate are approximately additive and, in cases where all markers are biased towards Down syndrome, biases in all three markers for the triple test can more than double the false positive rate. Conclusions Biases in marker MoM values can occur in many ways, inappropriate median values, kit lot change, drift in assay performance and operator effects. We present methods which allow the impact of these changes to be assessed in relation to patient-specific risks and the overall screening performance. This, in turn, will enable appropriate quality control procedures to be established to control the magnitude of reported marker MoM biases, or equivalently, the magnitude of biases associated with the calculation of patient-specific risks. Copyright © 2007 John Wiley & Sons, Ltd.     

The use of heterospecific scent marks by the sweat bee <Emphasis Type="Italic">Halictus aerarius</Emphasis>

To forage effectively amongst flowers, some bee species utilize olfactory cues left by previous visitors in addition to direct assessment of visual cues to identify rewarding flowers. This ability can be more advantageous if the bees can recognize and use scent marks left by heterospecifics, not just marks left by members of their own species. We conducted field experiments to investigate whether the sweat bee Halictus aerarius avoids visiting flowers of trailing water willow Justicia procumbens emptied by other bee species. We found that H. aerarius rejected the flowers visited by both heterospecifics and conspecifics. They also rejected visited flowers artificially replenished with nectar. Our results demonstrate that social bees outside the Apidae can detect marks left on flowers by heterospecifics but that (on this plant species) they are unable to discriminate against flowers by directly detecting nectar volume. H. aerarius exhibited different rejection rates according to the identity of the previous bee species. We suggest that the frequency of rejection responses may depend on the amount of chemical substances left by the previous bee. In general, the use of scent marks left by previous visitors is almost certainly advantageous, enabling foragers to avoid flowers with depleted nectar levels and thereby improving their foraging efficiency.     

Impact of emissions from natural gas production facilities on ambient air quality in the Barnett Shale area: A pilot study

Rapid and extensive development of shale gas resources in the Barnett Shale region of Texas in recent years has created concerns about potential environmental impacts on water and air quality. The purpose of this study was to provide a better understanding of the potential contributions of emissions from gas production operations to population exposure to air toxics in the Barnett Shale region. This goal was approached using a combination of chemical characterization of the volatile organic compound (VOC) emissions from active wells, saturation monitoring for gaseous and particulate pollutants in a residential community located near active gas/oil extraction and processing facilities, source apportionment of VOCs measured in the community using the Chemical Mass Balance (CMB) receptor model, and direct measurements of the pollutant gradient downwind of a gas well with high VOC emissions. Overall, the study results indicate that air quality impacts due to individual gas wells and compressor stations are not likely to be discernible beyond a distance of approximately 100 m in the downwind direction. However, source apportionment results indicate a significant contribution to regional VOCs from gas production sources, particularly for lower-molecular-weight alkanes (<C6). Although measured ambient VOC concentrations were well below health-based safe exposure levels, the existence of urban-level mean concentrations of benzene and other mobile source air toxics combined with soot to total carbon ratios that were high for an area with little residential or commercial development may be indicative of the impact of increased heavy-duty vehicle traffic related to gas production

ImplicationsRapid and extensive development of shale gas resources in recent years has created concerns about potential environmental impacts on water and air quality. This study focused on directly measuring the ambient air pollutant levels occurring at residential properties located near natural gas extraction and processing facilities, and estimating the relative contributions from gas production and motor vehicle emissions to ambient VOC concentrations. Although only a small-scale case study, the results may be useful for guidance in planning future ambient air quality studies and human exposure estimates in areas of intensive shale gas production.     

Polycyclic aromatic hydrocarbons (PAHs) in multimedia environment of Heshan coal district,Guangxi: distribution,source diagnosis and health risk assessment

Mining activities are among the major culprits of the wide occurrences of soil and water pollution by PAHs in coal district, which have resulted in ecological fragilities and health risk for local residents. Sixteen PAHs in multimedia environment from the Heshan coal district of Guangxi, South China, were measured, aiming to investigate the contamination level, distribution and possible sources and to estimate the potential health risks of PAHs. The average concentrations of 16 PAHs in the coal, coal gangue, soil, surface water and groundwater were 5114.56, 4551.10, 1280.12 ng g^?1, 426.98 and 381.20 ng L^?1, respectively. Additionally, higher soil and water PAH concentrations were detected in the vicinities of coal or coal gangue dump. Composition analysis, isomeric ratio, Pearson correlation analysis and principal component analysis were performed to diagnose the potential sources of PAHs in different environmental matrices, suggesting the dominant inputs of PAHs from coal/coal combustion and coal gangue in the soil and water. Soil and water guidelines and the incremental lifetime risk (ICLR) were used to assess the health risk, showing that soil and water were heavily contaminated by PAHs, and mean ICLR_{coal/coal-gangue} and mean ICLR_soil were both significantly higher than the acceptable levels (1 × 10^?4), posing high potential carcinogenic risk to residents, especially coal workers. This study highlights the environmental pollution problems and public health concerns of coal mining, particularly the potential occupational health hazards of coal miners exposed in Heshan.     

Denitrification and availability of carbon and nitrogen in a well-drained pasture soil amended with particulate organic carbon

A well-drained soil in N-fertilized dairy pasture was amended with particulate organic carbon (POC), either sawdust or coarse woody mulch, and sampled every 4 wk for a year to test the hypothesis that the addition of POC would increase denitrification activity by increasing the number of microsites where denitrification occurred. Overall mean denitrifying enzyme activity (DEA), on a gravimetric basis, was 100% greater for the woody mulch treatment and 50% greater for the sawdust treatment compared with controls, indicating the denitrifying potential of the soil was enhanced. Despite differences in DEA, no difference in denitrification rate, as measured by the acetylene block technique, was detected among treatments, with an average annual N loss of ～22 kg N ha yr Soil water content overall was driving denitrification in this well-drained soil as regression of the natural log of volumetric soil water content (VWC) against denitrification rate was highly significant ( = 0.74, < 0.001). Addition of the amendments, however, had significant effects on the availability of both C and N. An additional 20 to 40 kg N ha was stored in POC-amended treatments as a result of increases in the microbial biomass. Basal respiration, as a measure of available C, was 400% greater than controls in the sawdust treatment and 250% greater than controls in the mulch. Net N mineralization, however, was significantly lower in the sawdust treatment, resulting in significantly lower nitrate N levels than in the control. We attribute the lack of measured response in denitrification rate to the high temporal variability in denitrification and suggest that diffusion of nitrate may ultimately have limited denitrification in the amended treatments. Our data indicate that manipulation of denitrification by addition of POC may be possible, particularly when nitrate levels are high, but quantifying differences in the rate of denitrification is difficult because of the temporal nature of the process (particularly the complex interaction of N availability and soil water content).     

An investigation into the likely impact of oxy-coal retrofit on fire-side corrosion behavior in utility boilers

Real-time electrochemical measurements of corrosion rate were performed to evaluate the respective corrosion rates of one boiler waterwall material (SA210) and three boiler superheater materials (T22, P91 and 347H) while firing Utah Western bituminous, Illinois high-sulfur bituminous and Powder River Basin (PRB) sub-bituminous coals in a 1.5 MW pulverized coal-fired furnace. The raw average measured corrosion rates were very low, between 0.0003 and 0.016 mm/year (0.012 and 0.63 mils/year) for most materials under air- and oxy-fired conditions. For some high-sulfur conditions measured corrosion rates were as high as 0.72 mm/year (28 mils/year). Waterwall corrosion rates decreased consistently when converting from air- to oxy-firing while superheater corrosion rates generally increased, although they were less than twice the air-fired rate under most conditions. Corrosion rates for the lower alloyed materials (SA210 and T22) increased significantly during transients from reducing to oxidizing conditions. Measured increases in the corrosion rate of 347H material under high sulfur and low temperature conditions, and associated decrease in corrosion rate at higher temperatures on this alloy, were consistent with the formation of trisulphates in the superheater deposits. The increase of corrosion rate with increased metal temperatures was demonstrated, as was the consistently repeatable nature of the observed results.     

Flexible foraging strategies in a diving seabird with high flight cost

How central-place foragers change search strategy in response to environmental conditions is poorly known. Foragers may vary the total distance travelled and how far they range from the central place in response to variation in the distribution of their prey. One potential reason as to why they would extend the length of their foraging trip and its distance from the colony would be to increase prey quality or quantity, despite incurring higher transit costs. To test this trade-off hypothesis in a species with high flight costs, we recorded the foraging behaviour of razorbills (Alca torca) using state-of-the-art techniques that log both individual horizontal (flight activity) and vertical (dive activity) movements. We show that the distance that razorbills travelled to foraging locations increased with sea-surface temperature, which may relate to higher prey quality or quantity. This relation is supported by an indirect index of patch quality, based on dive profiles, which also increased with travel distance from the colony. Furthermore, we show that this index was highest during the daily peak in diving activity, around midday. Taken together, these results suggest that razorbills are capable of adjusting their search strategies sensitively in response to proximate environmental cues.