Long Term Trends in Concentration of Major Pollutants (SO<Subscript>2</Subscript>, CO,NO, NO<Subscript>2</Subscript>, O<Subscript>3</Subscript> and PM<Subscript>10</Subscript>) in Prague – Czech Republic (Analysis of Data Between 1992 and 2005)

To assess the effect of changes in traffic density and fuels used for heating at the beginning of the 1990s, 1992–2005 monthly averages of PM₁₀, SO₂, NO₂, NO, CO and O₃ from Prague, the Czech capital, were analyzed together with long term trends in emissions of major pollutants, fuel consumption and number of vehicles registered in Prague. The data from all monitoring stations were retrieved from the database of the state automated monitoring system. Correlation coefficients between ambient monthly averaged temperature and all pollutants of concern showed distinct seasonal trends. The results showed that while SO₂ and to some extent also CO concentrations dropped namely in the first half of the analyzed period (1992–1997) as a result decreased fossil fuel consumption for local heating, the behaviour of other pollutant concentrations followed a different pattern. PM₁₀ concentrations decreased during the beginning of the 1990s but showed a sign of increase after 2000. Concentrations of ozone and NO₂ did not reveal any significant change throughout the whole studied period. It can be concluded that during the studied period traditional urban sources of pollution, such as coal and oil combustion, lost their importance but were simultaneously substituted by pollutants from automotive transport (namely PM and NO₂) making the problem of air quality even worse.     

Ethanol fuels: Energy security,economics, and the environment

Problems of fuel ethanol production have been the subject of numerous reports, including this analysis. The conclusions are that ethanol: does not improve U.S. energy security; is uneconomical; is not a renewable energy source; and increases environmental degradation. Ethanol production is wasteful of energy resources and does not increase energy security. Considerably more energy, much of it high- grade fossil fuels, is required to produce ethanol than is available in the energy output. About 72% more energy is used to produce a gallon of ethanol than the energy in a gallon of ethanol. Ethanol production from corn is not renewable energy. Its production uses more non- renewable fossil energy resources in growing the corn and in the fermentation/distillation process than is produced as ethanol energy. Ethanol produced from corn and other food crops is also an unreliable and therefore a non-secure source of energy, because of the likelihood of uncontrollable climatic fluctuations, particularly droughts which reduce crop yields. The expected priority for corn and other food crops would be for food and feed. Increasing ethanol production would increase degradation of agricultural land and water and pollute the environment. In U.S. corn production, soil erodes some 18- times faster than soil is reformed, and, where irrigated, corn production mines water faster than recharge of aquifers. Increasing the cost of food and diverting human food resources to the costly and inefficient production of ethanol fuel raise major ethical questions. These occur at a time when more food is needed to meet the basic needs of a rapidly growing world population.     

Calibration and Verification of SWMM for Low Impact Development

The Storm Water Management Model was used to simulate runoff and nutrient export from a low impact development (LID) watershed and a watershed using traditional runoff controls. Predictions were compared to observed values. Uncalibrated simulations underpredicted weekly runoff volume and average peak flow rates from the multiple subcatchment LID watershed by over 80%; the single subcatchment traditional watershed had better predictions. Saturated hydraulic conductivity, Manning's n for swales, and initial soil moisture deficit were sensitive parameters. After calibration, prediction of total weekly runoff volume for the LID and traditional watersheds improved to within 12 and 5% of observed values, respectively. For the validation period, predicted total weekly runoff volumes for the LID and traditional watersheds were within 6 and 2% of observed values, respectively. Water quality simulation was less successful, Nash–Sutcliffe coefficients >0.5 for both calibration and validation periods were only achieved for prediction of total nitrogen export from the LID watershed. Simulation of a 100‐year, 24‐h storm resulted in a runoff coefficient of 0.46 for the LID watershed and 0.59 for the traditional watershed. Results suggest either calibration is needed to improve predictions for LID watersheds or expanded look‐up tables for Green–Ampt infiltration parameter values that account for compaction of urban soil and antecedent conditions are needed.     

Evaluating Infiltration Requirements for New Development Using Extreme Storm Transposition: A Case Study from Dane County,WI

Changes in land use and extreme rainfall trends can lead to increased flood vulnerability in many parts of the world, especially for urbanized watersheds. This study investigates the performance of existing stormwater management strategies for the Upper Yahara watershed in Dane County, WI to determine whether they are adequate to protect urban and suburban development from an extreme rainfall. Using extreme storm transposition, we model the performance of the stormwater infiltration practices required for new development under current county ordinances. We find during extreme rainfall the volume of post‐development runoff from impervious surfaces from a typical site would increase by over 55% over pre‐development conditions. We recommend the ordinance be strengthened to reduce vulnerability to flooding from future urban expansion and the likely increase in the magnitude and frequency of extreme storms.     

Observations of Atmospheric Nitrogen and Phosphorus Deposition During the Period of Algal Bloom Formation in Northern Lake Taihu,China

Cyanobacterial blooms in Lake Taihu occurred at the end of April 2007 and had crucial impacts on the livelihood of millions of people living there. Excessive nutrients may promote bloom formation. Atmospheric nitrogen (N) and phosphorus (P) deposition appears to play an important role in algal bloom formation. Bulk deposition and rain water samples were collected respectively from May 1 to November 30, 2007, the period of optimal algal growth, to measure the bulk atmospheric deposition rate, wet deposition rate, and dry deposition rate for total nitrogen (TN; i.e., all species of nitrogen), and total phosphorus (TP; i.e., all species of phosphorus), in northern Lake Taihu, China. The trends of the bulk atmospheric deposition rate for TN and the wet deposition rate for TN showed double peaks during the observation period and distinct influence with plum rains and typhoons. Meanwhile, monthly bulk atmospheric deposition rates for TP showed little influence of annual precipitation. However, excessive rain may lead to high atmospheric N and P deposition rates. In bulk deposition samples, the average percentage of total dissolved nitrogen accounting for TN was 91.2% and changed little with time. However, the average percentage of total dissolved phosphorus accounting for TP was 65.6% and changed substantially with time. Annual bulk atmospheric deposition rates of TN and TP during 2007 in Lake Taihu were estimated to be 2,976 and 84 kg km⁻² a⁻¹, respectively. The results showed decreases of 34.4% and 78.7%, respectively, compared to 2002–2003. Annual bulk deposition load of TN for Lake Taihu was estimated at 6,958 t a⁻¹ in 2007 including 4,642 t a⁻¹ of wet deposition, lower than the values obtained in 2002–2003. This may be due to measures taken to save energy and emission control regulations in the Yangtze River Delta. Nevertheless, high atmospheric N and P deposition loads helped support cyanobacterial blooms in northern Lake Taihu during summer and autumn, the period of favorable algal growth.     

Long Term Trends in Sulphur and Nitrogen Deposition in Europe and the Cause of Non-linearities

Emissions of sulphur and oxidized nitrogen compounds in Europe have been reduced following a series of control measures during the last two decades. These changes have taken place during a period in which the primary gases and the wet deposition throughout Europe were extensively monitored. Since the end of the 1970s, for example land based sulphur emissions declined by between 90 and 70% depending on the region. Over the same period the total deposition of sulphur and its partitioning into wet and dry deposition have declined, but the spatial pattern in the reduction in deposition differs from that of emission and has changed with time. Such non-linearities in the emission-deposition relationship are important to understand as they complicate the process of assessing the effects of emission reduction strategies. Observed non-linearities in terrestrial sulphur emission-deposition patterns have been identified in north west Europe due to increases in marine emissions, and are currently slowing the recovery of freshwater ecosystems. Changes in the relative amounts of SO₂ and NH₃ in air over the last two decades have also changed the affinity of terrestrial surfaces for SO₂ and have therefore changed the deposition velocity of SO₂ over substantial areas. The consequence of this effect has been the very rapid reduction in ambient SO₂ concentration in some of the major source areas of Europe, where NH₃ did not change much. Interactions between the different pollutants, generating non-linearities are now being incorporated in long-range transport models to simulate the effects of historical emission trends and to provide projections into the future. This paper identifies non-linearities in emission deposition relationships for sulphur and nitrogen compounds in Europe using data from the EMEP long-rang transport model and measured concentration fields of the major ions in precipitation and of SO₂ and NO₂ in surface air.     

An Assessment of Oil Pollution in the Coastal Zone of Patagonia,Argentina

The Patagonian coast is considered a relatively pristine environment. However, studies conducted along coastal Patagonia have showed hydrocarbon pollution mostly concentrated at ports that have fishing, oil loading, general merchant, and/or tourist activities. A high value of total aliphatic hydrocarbons (TAH) was found at the Rawson fishing port (741 μg/g dw). In other ports with and without petroleum-related activities, hydrocarbon values were approximately 100 μg/g dw. The highest values for TAH and total aromatic hydrocarbons (TArH) were found in Faro Aristizábal, north of San Jorge gulf (1304 and 737 μg/g dw, respectively). This is very likely the result of petroleum-related activities at the Comodoro Rivadavia, Caleta Cordova, and Caleta Olivia ports located within this gulf. In other coastal areas away from potential anthropogenic sources, hydrocarbon values were less than 2 and 3 μg/g dw for TAH and TArH, respectively. This review of published and unpublished information suggests that ports are important oil pollution sources in the Patagonian coast. More detailed studies are needed to evaluate the area affected by port activities, to understand the mechanisms of hydrocarbon distribution in surrounding environments, and to assess bioaccumulation in marine organisms. Despite that some regulations exist to control oil pollution derived from port and docked vessel activities, new and stricter management guidelines should be implemented.     

The importance of auditory-visual interaction in the construction of ‘tranquil space’

In a world of sensory overload, it is becoming increasingly important to provide environments that enable us to recover our sense of well being. Such restorative (‘tranquil’) environments need to comprise sufficient sensory stimulation to keep us engaged, whilst at the same time providing opportunity for reflection and relaxation. One essential aspect in safeguarding existing, or developing new ‘tranquil space’, is understanding the optimum relationship between the soundscape and the visual composition of a location. This research represents a first step in understanding the effects of audio-visual interaction on the perception of tranquillity and identifies how the interpretation of acoustic information is an integral part of this process. By using uni and bi-modal auditory-visual stimuli in a two stage experimental strategy, it has been possible to measure the key components of the tranquillity construct. The findings of this work should be of particular interest to those charged with landscape management, such as National Park Authorities, Regional Councils, and other agencies concerned with providing and maintaining public amenity.     

Phosphates for Pb immobilization in soils: a review

In its soluble ionic forms, lead (Pb) is a toxic element occurring in waters and soils mainly as the result of human activities. The bioavailability of lead ions can be decreased by complexation with various materials in order to decrease their toxicity. Pb chemical immobilization using phosphate addition is a widely accepted technique to immobilize Pb from aqueous solution and contaminated soils. The application of different P amendments cause Pb in soils to shift from forms with high availability to the most strongly bound Pb fractions. The increase of Pb in the residual or insoluble fraction results from formation of pyromorphite Pb₅(PO₄)₃X where X = F, Cl, Br, OH, the most stable environmental Pb compounds under a wide range of pH and Eh natural conditions. Accidental pyromorphite ingestion does not yield bioavailable lead, because pyromorphite is insoluble in the intestinal tract. Numerous natural and synthetic phosphates materials have been used to immobilize Pb: apatite and hydroxyapatite, biological apatite, rock phosphate, soluble phosphate fertilizers such as monoammonium phosphate, diammonium phosphate, phosphoric acid, biosolids rich in P, phosphatic clay and mixtures. The identification of pyromorphite in phosphate amended soils has been carried out by different non destructive techniques such as X-ray diffraction, scanning electron microscopy coupled with energy dispersive X-ray spectroscopy, X-ray absorption fine structure, transmission electron microscopy and electron microprobe analysis. The effectiveness of in situ Pb immobilization has also been evaluated by selective sequential extraction, by the toxicity leaching procedure and by a physiologically based extraction procedure simulating metal ingestion and gastrointestinal bioavailability to humans. Efficient Pb immobilization using P amendments requires increasing the solubility of the phosphate phase and of the Pb species phase by inducing acid conditions. Although phosphorus addition seems to be highly effective, excess P in soil and its potential effect on eutrophication of surface water, and the possibility of As enhanced leaching remains a concern. The use of mixed treatments may be a useful strategy to improve their effectiveness in reducing lead phyto- and bioavailability.