DNA Heat Treatment for Improving qPCR Analysis of Human Adenovirus in Wastewater

PCR inhibitory substances in complex sample matrices can cause false negatives or under-estimation of target concentration. This study assessed DNA heat treatment for reducing inhibition during qPCR analysis of human adenovirus (HAdV) in wastewater samples. Inhibition was reduced by heat treating DNA, where mean HAdV concentration was increased by 0.71 log₁₀ GC/L (and up to 3.04 log₁₀ GC/L in one case), and replicate variability and false negatives were reduced. DNA heat treatment should be further investigated for improving reliability of HAdV concentration estimates in water, which can support more accurate assessment of health risks associated with viral pathogen exposure.     

Assessment and Evaluation of an Integrated Hybrid Anaerobic–Aerobic Sewage Treatment System for the Removal of Enteric Viruses

The capability of a cost-effective and a small size decentralized pilot wastewater treatment plant (WWTP) to remove enteric viruses such as rotavirus, norovirus genogroup I (GGI), norovirus genogroup II (GGII), Hepatitis E virus (HEV), and adenovirus was studied. This pilot plant is an integrated hybrid anaerobic/aerobic setup which consisted of anaerobic sludge blanket (UASB), biological aerated filter (BAF), and inclined plate settler (IPS). Both the UASB and BAF are packed with a non-woven polyester fabric (NWPF). Results indicated that the overall log₁₀ reductions of enteric viruses’ genome copies through the whole system were 3.1 ± 1, 3.3 ± 0.5, and 2.6 ± 0.9 log₁₀ for rotavirus, norovirus GGI, and adenovirus, respectively. Reduction efficiency for both norovirus GGII and HEV after the different treatment steps could not be calculated because there were no significant numbers of positive samples for both viruses. The overall reduction of rotavirus infectious units through the whole system was 2.2 ± 0.8 log₁₀ reduction which is very close to the overall log₁₀ reduction of adenovirus infectious units through the whole system which was 2.1 ± 0.8 log₁₀ reduction. There was no considerable difference in the removal efficiency for different rotavirus G and P types. Adenovirus 41 was the only type detected in the all positive samples. Although the pilot WWTP investigated is cost effective, has a small footprint, does not need a long distance network pipes, and easy to operate, its efficiency to remove enteric viruses is comparable with the conventional centralized WWTPs.     

Revisiting chronodisruption: when the physiological nexus between internal and external times splits in humans

In this Concepts & Synthesis paper, we expand the definition of chronodisruption in humans by proposing that it can be operationalized as the split nexus of internal and external times. With this premise, we suggest how chronotype may be used as a temporal marker (chronomarker) of exposure to chronodisruption in studies of cancer, and beyond, offer cancer risk predictions for observational research on the basis of a chronotype-related hypothesis and corollary, and point to first empirical data in humans. In an a priori way, we examine possible outcomes and perspectives for preventive measures following from our rationale and the suggested chronobiology-driven studies and close with overall advances of chronodisruption research.     

Individual consistency in exploratory behaviour and mating tactics in male guppies

While behavioural plasticity is considered an adaptation to fluctuating social and environmental conditions, many animals also display a high level of individual consistency in their behaviour over time or across contexts (generally termed ‘personality’). However, studies of animal personalities that include sexual behaviour, or functionally distinct but correlated traits, are relatively scarce. In this study, we tested for individual behavioural consistency in courtship and exploratory behaviour in male guppies (Poecilia reticulata) in two light environments (high vs. low light intensity). Based on previous work on guppies, we predicted that males would modify their behaviour from sneak mating tactics to courtship displays under low light conditions, but also that the rank orders of courtship effort would remain unchanged (i.e. highly sexually active individuals would display relatively high levels of courtship under both light regimes). We also tested for correlations between courtship and exploratory behaviour, predicting that males that had high display rates would also be more likely to approach a novel object. Although males showed significant consistency in their exploratory and mating behaviour over time (1 week), we found no evidence that these traits constituted a behavioural syndrome. Furthermore, in contrast to previous work, we found no overall effect of the light environment on any of the behaviours measured, although males responded to the treatment on an individual-level basis, as reflected by a significant individual-by-environment interaction. The future challenge is to investigate how individual consistency across different environmental contexts relates to male reproductive success.     

Seasonal changes in burrow geometry of the common mole rat (Rodentia: Bathyergidae)

Sociality in mole rats has been suggested to have evolved as a response to the widely dispersed food resources and the limited burrowing opportunities that result from sporadic rainfall events. In the most arid regions, individual foraging efficiency is reduced, and energetic constraints increase. In this study, we investigate seasonal differences in burrow architecture of the social Cryptomys hottentotus hottentotus in a mesic region. We describe burrow geometry in response to seasonal weather conditions for two seasons (wet and dry). Interactions occurred between seasons and colony size for the size of the burrow systems, but not the shape of the burrow systems. The fractal dimension values of the burrow systems did not differ between seasons. Thus, the burrow complexity was dependent upon the number of mole rats present in the social group.     

Influence of dissolved organic matter character on mercury incorporation by planktonic organisms：An experimental study using oligotrophic water from Patagonian lakes

Ligands present in dissolved organic matter （DOM） form complexes with inorganic divalent mercury （Hg^2＋） affecting its bioavailability in pelagic food webs. This investigation addresses the influence of a natural gradient of DOM present in Patagonian lakes on the bioaccumulation of Hg^2＋ （the prevailing mercury species in the water column of these lakes） by the algae Cryptomonas erosa and the zooplankters Brachionus calyciflorus and Boeckella antiqua. Hg^2＋ accumulation was studied through laboratory experiments using natural water of four oligotrophic Patagonian lakes amended with^197Hg^2＋. The bioavailability of Hg^2＋ was affected by the concentration and character of DOM. The entrance of Hg^2＋ into pelagic food webs occurs mostly through passive and active accumulation. The incorporation of Hg^2＋ by Cryptomonas, up to 27% of the Hg^2＋ amended, was found to be rapid and dominated by passive adsorption, and was greatest when low molecular weight compounds with protein-like or small phenolic signatures prevailed in the DOM. Conversely, high molecular weight compounds with a humic or fulvic signature kept Hg^2＋ in the dissolved phase, resulting in the lowest Hg^2＋ accumulation in this algae. In Brachionus and Boeckella the direct incorporation of Hg from the aqueous phase was up to 3% of the Hg^2＋ amended. The dietary incorporation of Hg^2＋ by Boeckella exceeded the direct absorption of this metal in natural water, and was remarkably similar to the Hg^2＋ adsorbed in their prey. Overall, DOM concentration and character affected the adsorption of Hg^2＋ by algae through competitive binding, while the incorporation of Hg^2＋ into the zooplankton was dominated by trophic or dietary transfer.     

A comprehensive review of climate adaptation in the United States: more than before, but less than needed

We reviewed existing and planned adaptation activities of federal, tribal, state, and local governments and the private sector in the United States (U.S.) to understand what types of adaptation activities are underway across different sectors and scales throughout the country. Primary sources of review included material officially submitted for consideration in the upcoming 2013 U.S. National Climate Assessment and supplemental peer-reviewed and grey literature. Although substantial adaptation planning is occurring in various sectors, levels of government, and the private sector, few measures have been implemented and even fewer have been evaluated. Most adaptation actions to date appear to be incremental changes, not the transformational changes that may be needed in certain cases to adapt to significant changes in climate. While there appear to be no one-size-fits-all adaptations, there are similarities in approaches across scales and sectors, including mainstreaming climate considerations into existing policies and plans, and pursuing no- and low-regrets strategies. Despite the positive momentum in recent years, barriers to implementation still impede action in all sectors and across scales. The most significant barriers include lack of funding, policy and institutional constraints, and difficulty in anticipating climate change given the current state of information on change. However, the practice of adaptation can advance through learning by doing, stakeholder engagements (including “listening sessions”), and sharing of best practices. Efforts to advance adaptation across the U.S. and globally will necessitate the reduction or elimination of barriers, the enhancement of information and best practice sharing mechanisms, and the creation of comprehensive adaptation evaluation metrics.     

Shear cutting and counter shear cutting of sandwich materials

New lightweight sandwich materials challenge existing forming processes as well as following process steps. As such the manufacturing potential of shear cutting has to be evaluated. Two cutting methods are compared. Method commonly used is shear-cutting within one stroke engaged, the other one is known as counter-shear cutting, which uses two strokes.The challenges of cutting sandwich materials are variation of hole diameter within the different layers, fraying of the textiles, deformation of the hole contour and burr formation. These effects occur in conventional shear cutting as the intermediate layer and the lower sheet metal are cut by the scrap of the upper sheet instead of the cutting punch.The following methodology included shear cutting with closed cutting edge i.e. cutting of holes into five different sandwich materials. The sandwiches exemplarily represent multiple kinds of possible material designs. For instance, aluminum and steel face sheets, different thicknesses of intermediate layers and different intermediate layers materials such as integrated textile fibers have been used. Adequate cutting parameters such as die clearance and the use of a blank holder have been determined. To achieve good results a stiff machine design with good guidance and precise control of punch position was crucial.Observations of conventional shear cutting revealed the need of small cutting clearance of 4%. High burnish area is possible for the upper face sheet due to the superimposed force by the lower face sheet. The major conclusion depicted that high cutting quality of sandwich materials requires counter shear cutting. Hence, the roll-over of the lower sheet facing the intermediate layer, the burnish area at the lower sheet, good cutting quality of the fibers improve significantly and burr formation is avoided completely. Summarized this paper provides cutting parameters for sandwich materials based on experimental work.