Lightweight Concrete Containing an Alkaline Resistant Starch-Based Aquagel

Starch aquagel-based lightweight concrete has properties similar to those of other lightweight concrete products. However, starch aquagels are unstable in the strongly alkaline conditions typical of Portland Cement-based concrete and may interfere with the setting process. The effect of alkali treatments on the physical, mechanical, and functional properties of starch aquagels and aquagels from starch/polymer blends was investigated. Starch was blended at 100–115°C in a twin-screw extruder with five different polymers to determine whether the blends improved alkaline resistance. Polymer blends containing 5%, 15%, and 30% of the polymer hydrated and formed aquagels when equilibrated in water for 24 h. However, equilibrium moisture content was lower for the blends compared to the starch control. Aquagels equilibrated in 0.15 N NaOH swelled, lost compressive strength and had greater than 90% moisture. The blend of starch and 30% PVOH absorbed less moisture and was more resistant to alkaline dissolution in 1 N NaOH than the other blends tested making it a more suitable material for aquagel-based concrete. The moisture content of starch-based aquagels and mixing time were critical factors in determining setting times. The size of aquagel blends had a minor effect on density and compressive strength.     

Nitrous Oxide in Agricultural Drainage Waters Following Field Fertilisation

Dissolved nitrous oxide (N₂O), nitrate (NO₃ ^-), and ammonium (NH₄ ⁺) concentrations in an agricultural field drain were intensively measured over the period of field nitrogen (N) fertilisation and for several weeks thereafter. Supersaturations of dissolved N₂O were observed in field drain waters throughout the study. On entry to an open drainage ditch, concentrations of dissolved N₂O rapidly decreased and a total N₂O-N emission via this pathway of 13.2 g over the period of study (45 days) was calculated. This compared with a predicted emission of the order of 300 g, based on measured losses of NO₃ ^- and NH₄ ⁺ in the field drainage water, and the default IPCC emission factor of 0.01 kg N₂O-N per kg Nentering rivers and estuaries. In contrast to widespread evidence of a clear relationship between the amount of N applied to agricultural land and subsequent direct N₂O emission from the soil surface, the relationship between the amount of N₂O in soil drainage waters and the amount of N applied was poor. We conclude that the complexity, both spatially and temporally, of the processes ultimately responsible for the amount of N₂O in agricultural drainage waters make a straightforward relationship between N₂O concentration and N application rate unlikely in all but the simplest of systems.     

Radiogenic Lead Isotopes and Time Stratigraphy in the Hudson River, New York

Radionuclide, radiogenic lead isotope and trace metal analyses on fine-grained sediment cores collected along 160 km of the upper and tidal Hudson River were used to examine temporal trends of contaminant loadings and to develop radiogenic lead isotopes both as a stratigraphic tool and as tracers for resolving decadal particle transport fluxes. Very large inputs of Cd, Sb, Pb, and Cr are evident in the sediment record, potentially from a single manufacturing facility. The total range in radiogenic lead isotope ratios observed in well-dated cores collected about 24 km downstream of the plant is large (e.g., maximum difference in ²⁰⁶Pb/²⁰⁷Pb is 10%), characterized by four major shifts occurring in the 1950s, 1960s, 1970s and 1980s. The upper Hudson signals in Cd and radiogenic lead isotopes were still evident in sediments collected 160 km downstream in the tidal Hudson. The large magnitude and abrupt shifts in radiogenic lead isotope ratios as a function of depth provide sensitive temporal constraints that complement information derived from radionuclide analyses to significantly improve the precision of dating assignments. Application of a simple dilution model to data from paired cores suggests much larger sediment inputs in one section of the river than previously reported, suggesting particle influxes to the Hudson have been underestimated.     

Measurements of PCB Fluxes into the Atmosphere from a Site Receiving Stabilized Dredged Material

A 50 ha known contaminated site in Bayonne, New Jersey, U.S.A. is permitted to receive up to 3 × 10⁶ m³ of sediment dredged from navigation channels in the New York/New Jersey Harbor. Much of the sediment is expected to contain low to moderate concentrations of industrial and agricultural chemicals, including Polychlorinated Biphenyls (PCBs). The dredged material brought to the site is stabilized with cement and then placed as a capping and grading layer. The flux of PCBs from drying stabilized dredged material has been estimated from measurements of PCB air concentrations at two heights above the ground along with micrometeorological observations. A statistically significant gradient in PCB concentrations has been consistently measured in the first 3 m above the ground. Observed PCB fluxes were highest over freshly placed stabilized dredged sediment and decreased as it cured. The highest flux observed in this study was 7214 ng/m²/h, but during subsequent sampling intervals at the same site, the flux estimates decreased by an order of magnitude over a 5-day interval.     

How clean is clean enough? Maintaining thermal protective clothing under field conditions in the oil and gas sector.

The purpose of this research was to develop practical care procedures to help maintain the protective quality of flame resistant workwear laundered by workers in the field. Based on observed field conditions, experiments were conducted that simulated domestic laundry procedures. The first experiment involved two flame resistant (FR) fabrics, contaminated or not contaminated with oil. Independent variables also included detergent type and laundry pre-treatment. Other laundry parameters were controlled. Results indicated that it is easier to maintain the FR performance of the FR-treated blend than it is for the aramid fabric. It is hypothesized that energy generated by initial ignition of oil on the specimens triggers the FR mechanism of the treatment, which in turn inhibits further combustion. A second experiment using larger specimens and a domestic washing machine also supported the hypothesized mechanism.     

Towards a model of safety climate measurement.

In this study, a survey instrument was developed to measure safety climate. A review of the scientific literature as well as consultation with an expert panel was used to determine the survey's dimensions. Next, the survey was administered, first as a pilot study (n = 15) and then as a full scale study (n = 229), to employees of the City of Cincinnati Department of Public Works. The psychometric integrity of the survey was assessed according to validity, reliability and utility criteria. Results are presented and discussed.     

Evidence of integration of air quality management in the decision-making processes and procedures of English local government

The air quality management (AQM) framework in the UK is a risk management approach using effects-based objectives for air pollutants to determine the need for action. The Environment Act 1995 required a National Air Quality Strategy to be published, setting out health-based standards and objectives for eight pollutants, of which seven are to managed at a local scale. Because of the variety of sources of air pollution, if the AQM process is to succeed in the long term, solutions to identified problems will be required from transport, land use and economic planning sectors of local government in liaison with various other agencies, regulators and outside bodies. As such the task is inherently multi-disciplinary and an integrated, collaborative approach will be necessary. Although this observation is now fairly well documented, there is still little guidance relating to how, in relation to air quality management, integration can actually be accomplished. This paper presents some observations from case studies undertaken as part of a longer-term research study and in particular focuses on the identified problems of involving non-air-quality professionals in a highly technical scientific process. Various approaches to the collaborative aspects of air quality management will be presented. These case studies represent local authorities of different sizes in different political and organisational situations facing a range of air quality challenges. The creation of project teams or task forces is judged particularly useful for local air quality management. Methods that could be applied more widely include appointing individuals as integrators, and rotation of key personnel.