Transport of atmospheric fine particulate matter: part 2--findings from recent field programs on the intraurban variability in fine particulate matter

Air quality field data, collected as part of the fine particulate matter Supersites Program and other field measurements programs, have been used to assess the degree of intraurban variability for various physical and chemical properties of ambient fine particulate matter. Spatial patterns vary from nearly homogeneous to quite heterogeneous, depending on the city, parameter of interest, and the approach or method used to define spatial variability. Secondary formation, which is often regional in nature, drives fine particulate matter mass and the relevant chemical components toward high intraurban spatial homogeneity. Those particulate matter components that are dominated by primary emissions within the urban area, such as black carbon and several trace elements, tend to exhibit greater spatial heterogeneity. A variety of study designs and data analysis approaches have been used to characterize intraurban variability. High temporal correlation does not imply spatial homogeneity. For example, there can be high temporal correlation but with spatial heterogeneity manifested as smooth spatial gradients, often emanating from areas of high emissions such as the urban core or industrial zones.     

Development of a regenerable system employing silica-titania composites for the recovery of mercury from end-box exhaust at a chlor-alkali facility

The release of mercury to the environment is of particular concern because of its volatility, persistence, and tendency to bioaccumulate. The recovery of mercury from end-box exhaust at chlor-alkali facilities is important to prevent release into the environment and reduce emissions as required by NESHAP (National Emission Standards for Hazardous Air Pollutants). A pilot-scale photocatalytic reactor packed with silica-titania composite (STC) pellets was tested at a chloralkali facility over a 3-month period. This pilot reactor treated up to 10 ft3/min (ACFM) of end-box exhaust and achieved 95% removal. The pilot reactor was able to maintain excellent removal efficiency even with large fluctuations in influent mercury concentration (400-1600 microg/ft3). The STC pellets were regenerated ex situ by regeneration with hydrochloric acid and performed similarly to virgin STC pellets when returned to service. On the basis of these promising results, two full-scale reactors with in situ regeneration capabilities were installed and operated. After optimization, these reactors performed similarly to the pilot reactor. A cost analysis was performed comparing the treatment costs (i.e., cost per pound of mercury removed) for sulfur-impregnated activated carbon and the STC system. The STC proved to be both technologically and economically feasible for this installation.     

The impact of the 2004 tsunami on coastal Thai communities: assessing adaptive capacity

The suddenness and scale of the 26 December 2004 tsunami and the challenges posed to affected communities highlighted the benefits of their members having a capacity to confront and adapt to the consequences of such a disaster. Research into adaptive capacity or resilience has been conducted almost exclusively with Western populations. This paper describes an exploratory study of the potential of a measure of collective efficacy developed for Western populations to predict the capacity of members of a collective society, Thai citizens affected by the 2004 tsunami, to confront effectively the recovery demands associated with this disaster. Following a demonstration that this measure could predict adaptive capacity, the role of religious affiliation, ethnicity and place of residence in sustaining collective efficacy is discussed. The implications of the findings for future research on, and intervention to develop, adaptive capacity among Thai citizens in particular and collectivist societies in general are discussed.     

Preliminary evidence of a decline in perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) concentrations in American Red Cross blood donors

The purpose of this pilot study was to determine whether perfluorooctanesulfonate (PFOS,C(8)F(17)SO(3)(-)) and perfluorooctanoate (PFOA,C(7)F(15)CO(2)(-)) concentrations in American Red Cross blood donors from Minneapolis-St. Paul, Minnesota have declined after the 2000-2002 phase-out of perfluorooctanesulfonyl-fluoride (POSF, C(8)F(17)SO(2)F)-based materials by the primary global manufacturer, 3M Company. Forty donor plasma samples, categorized by age and sex, were collected in 2005, and PFOS and PFOA concentrations were compared to 100 (non-paired) donor serum samples collected in 2000 from the same general population that were analyzed at the time using ion-pair extraction methods with tetrahydroperfluorooctanesulfonate as an internal standard. Eleven of the 100 samples originally collected were reanalyzed with present study methods that involved (13)C- labeled PFOA spiked into the donor samples, original samples, control human plasma, and the calibration curve prior to extraction, and was used as a surrogate to monitor extraction efficiency. Quantification was performed by high performance liquid chromatography tandem mass spectrometry methods. Among the 100 serum samples analyzed for PFOS, the geometric mean was 33.1 ng ml(-1) (95% CI 29.8-36.7) in 2000 compared to 15.1 ng ml(-1) (95% CI 13.3-17.1) in 2005 (p<0.0001) for the 40 donor plasma samples. The geometric mean concentration for PFOA was 4.5 ng ml(-1) (95% CI 4.1-5.0) in 2000 compared to 2.2 ng ml(-1) (95% CI 1.9-2.6) in 2005 (p<0.0001). The decrease was consistent across donors' age and sex. To confirm these preliminary findings, additional sub-sets of year 2000 samples will be analyzed, and a much larger biomonitoring study of other locations is planned.     

Refinery evaluation of optical imaging to locate fugitive emissions

Fugitive emissions account for approximately 50% of total hydrocarbon emissions from process plants. Federal and state regulations aiming at controlling these emissions require refineries and petrochemical plants in the United States to implement a Leak Detection and Repair Program (LDAR). The current regulatory work practice, U.S. Environment Protection Agency Method 21, requires designated components to be monitored individually at regular intervals. The annual costs of these LDAR programs in a typical refinery can exceed US$1,000,000. Previous studies have shown that a majority of controllable fugitive emissions come from a very small fraction of components. The Smart LDAR program aims to find cost-effective methods to monitor and reduce emissions from these large leakers. Optical gas imaging has been identified as one such technology that can help achieve this objective. This paper discusses a refinery evaluation of an instrument based on backscatter absorption gas imaging technology. This portable camera allows an operator to scan components more quickly and image gas leaks in real time. During the evaluation, the instrument was able to identify leaking components that were the source of 97% of the total mass emissions from leaks detected. More than 27,000 components were monitored. This was achieved in far less time than it would have taken using Method 21. In addition, the instrument was able to find leaks from components that are not required to be monitored by the current LDAR regulations. The technology principles and the parameters that affect instrument performance are also discussed in the paper.     

Modeling Acidification Recovery on Threatened Ecosystems: Application to the Evaluation of the Gothenburg Protocol in France

To evaluate the acid deposition reduction negotiated for 2010 within the UNECE LRTAP Gothenburg Protocol, sulphur and nitrogen deposition time-series (1880–2100) were compared to critical loads of acidity on five French ecosystems: Massif Central basalt (site 1) and granite (2); Paris Bassin tertiary sands (3); Vosges mountains sandstone (4) and Landes eolian sands (5). The SAFE model was used to estimate the response of soil solution pH and ratio to the deposition scenario. Among the five sites, critical loads were exceeded in the past at sites 3, 4 and 5. Sites 3 and 4 were still expected to exceed in 2010, the Protocol year. Further reduction of atmospheric deposition, mainly nitrogen, would be needed to achieve recovery on these ecosystems. At sites 3, 4 and 5, the delay between the critical load exceedance and the violation of the critical chemical criterion was estimated to be 10 to 30 years in the top soil and 50 to 90 years in the deeper soil. At site 5, a recovery was expected in the top soil in 2010 with a time lag of 10 years. Unexpectedly, soil pH continued to decrease after 1980 in the deeper soil at sites 2 and 5. This time lag indicated that acidification moved down the soil profile as a consequence of slow base cation depletion by ion exchange. This delayed response of the soil solution was the result of the combination of weathering rates and vegetation uptake but also of the relative ratio between base cation deposition and acid compounds.     

Enhanced degradation of benzo[a]pyrene by Mycobacterium sp. in conjunction with green alga

Previous work in this laboratory has confirmed that the bacteria Mycobacterium sp. strain RJGII.135 and Sphingomonas yanoikuyae strain B1 and the green alga Selanastrum capricornutum strain UTEX 1648 degrade benzo[a]pyrene (BaP) to various BaP intermediates. S. capricornutum was first grown with BaP for 4 days. The organic extract of this media was then introduced into separate cultures of strain RJGII.135 and strain B1; separate cultures were grown with BaP for comparison. Cultures grown with BaP and those grown with the algal/BaP extract showed similar mineralization patterns. The quantity of total metabolites formed was greater in bacterial cultures grown with the algal/BaP extract than those grown with BaP alone. For strain RJGII.135, only 27% of the original BaP remained in cultures grown with the algal/BaP extract; 59% remained in cultures grown with BaP. For strain B1, only 6% of the original BaP remained in cultures grown with the algal/BaP extract; 38% remained in cultures grown with BaP. These results indicate that strategies utilizing organisms together may be necessary in being able to degrade large, recalcitrant polycyclic aromatic hydrocarbons (PAHs) such as BaP.     

Variations in PCB concentrations between genders of six warmwater fish species in Lake Logan Martin, Alabama, USA

We collected and analyzed 955 individual fish (six species) for sexual differences in PCB bioaccumulations from a southeastern, USA reservoir. Using 2-way ANCOVAs, we found significant differences in fillet PCB concentrations between sexes for channel catfish (Ictalurus punctatus), largemouth bass (Micropterus salmoides) and spotted bass (Micropterus punctulatus). Striped bass (Morone saxatilus), black crappie (Pomoxis nigromaculatus) and freshwater drum (Aplodinotus grunniens) did not display differences between sexes in PCB concentrations. We suspect that sexual differences may be due to biological differences in reproduction, relative motility and lipid deposition. For one species (striped bass), sexual differences in PCB concentrations were inconsistent with a study in the Hudson River suggesting that sexual differences in bioaccumulations can change across ecosystems. Two species which did show sexual differences, largemouth bass and channel catfish, are often chosen as representative species (e.g., "piscivore" and "benthivore") in contaminant monitoring in many USA states indicating human consumption and risk management decisions would be improved if an equal number of male and female fish were included in composite PCBs analysis. This could reduce variability in fish PCBs data from which consumption advisories are based.     

Using Spatial Pattern to Quantify Relationship Between Samples, Surroundings, and Populations

The need for accurate carbon budgeting, climate change modelling, and sustainable resource management has lead to an increase in the number of large area forest monitoring programs. Large area forest monitoring programs often utilize field and remotely sensed data sources. Sampling, via field or photo plots, enables the collection of data with the desired level of categorical detail in a timely and efficient manner. When sampling, the aim is to collect representative detailed data enabling the statistical reporting upon the characteristics of larger areas. As a consequence, approaches for investigating how well sample data represent larger areas (i.e., the sample neighbourhood and the population) are desired. Presented in this communication is a quantitative approach for assessing the nature of sampled areas in relation to surrounding areas and the overall population of interest. Classified Landsat data is converted to forest/non-forest categories to provide a consistent and uniform data set over a 130,000 km² study region in central British Columbia, Canada. From this larger study area 322 2 × 2 km photo plots on a 20 × 20 km systematic grid are populated with composition and configuration information for comparison to non-sampled areas. Results indicate that typically, within the study area, the spatial pattern of forest within a photo plot is representative of the forest patterns found within primary and secondary neighbourhoods and over the entire population of the study. These methods have implications for understanding the nature of data used in monitoring programs worldwide. The ability to audit photo and field plot information promotes an increased understanding of the results developed from sampling and provides tools identifying locations of possible bias.     

Estimated Variability of National Atmospheric Deposition Program/Mercury Deposition Network Measurements Using Collocated Samplers

The National Atmospheric Deposition Program/Mercury Deposition Network (MDN) provides long-term, quality-assured records of mercury in wet deposition in the USA and Canada. Interpretation of spatial and temporal trends in the MDN data requires quantification of the variability of the MDN measurements. Variability is quantified for MDN data from collocated samplers at MDN sites in two states, one in Illinois and one in Washington. Median absolute differences in the collocated sampler data for total mercury concentration are approximately 11% of the median mercury concentration for all valid 1999–2004 MDN data. Median absolute differences are between 3.0% and 14% of the median MDN value for collector catch (sample volume) and between 6.0% and 15% of the median MDN value for mercury wet deposition. The overall measurement errors are sufficiently low to resolve between NADP/MDN measurements by ±2 ng·l⁻¹ and ±2 μg·m⁻²·year⁻¹, which are the contour intervals used to display the data on NADP isopleths maps for concentration and deposition, respectively.