The influence of two culturing techniques on toxicity of four chemicals in Arabidopsis

Plots of Arabidopsis thaliana L. (Heynh.) plants were grown in two hydroponic systems, one using a solid rooting support media (vermiculite) and the other a flowing solution culture. Both were tested with various concentrations of bromacil (5-bromo-3-sec-butyl-6-methyluracil), dichlobenil (2,6-dichlorobenzonitrile), copper sulfate (CuSO₄·5H₂O) and 3-aminotriazole. The effects on biomass production were compared. Plants treated with bromacil at concentrations up to 0.05 mg l^–1 were similarly reduced in growth in both culture methods. However, the toxic effects of dichlobenil, copper sulfate and 3-aminotriazole were different for both culture methods. Dichlobenil decreased plant growth in the solution culture at lower concentrations than in the vermiculite system. All aspects of growth were suppressed in the solution culture while the vegetative weight was unaffected in the vermiculite culture. Plants treated with 20 mg l^–1 copper sulfate in solution culture yielded mean seed weight of 1.2 g/plot compared to 3.1 g/plot when treated with the same concentration in the double-plot system. Plants treated with 0.5 mg l^–1 3-aminotriazole in solution culture produced no seed, while plants with the same nominal concentration in the double-pot method produced a mean seed weight of 6.5 g/plot. Solution culture testing was generally more sensitive and since roots were bathed directly in a solution of known pH, nutrient level and chemical concentration, the test conditions were more accurately defined.     

Evaluation of VOC measurments in the EXPOLIS study. Air Pollution Exposure Distributions within Adult Urban Urban Populations in Europe

Personal exposures and microenvironment concentrations of 30 target VOCs were measured for 401 participants living in five European cities as a part of the EXPOLIS (Air Pollution Exposure Distributions within Adult Urban Populations in Europe) study. Measurements in Basel used an active charcoal (Carbotech) adsorbent as opposed to the Tenax TA used in the other study centres. In addition, within each centre, personal and microenvironment VOC sampling required different sampling pumps and, because of different sampling durations, different sampling flow rates. Thus, careful testing of the sampling and analysis procedures was required to ensure accuracy and comparability of collected data. Monitor comparison tests using Tenax TA showed a mean VOC concentration ratio of 0.95 between the personal and microenvironment monitors. The LODs for the target VOCs using Tenax TA ranged from 0.7 to 5.2 microg m(-3). The LODs for the 14 target compounds quantifiable using Carbotech ranged from 0.9 to 3.2 microg m(-3). Tenax TA field blanks showed no remarkable contamination with the target VOCs, except benzaldehyde, a known artefact with this adsorbent. Thus, the diffusion barrier system used prevented contamination of Tenax TA samples by passive diffusion during non-sampling periods. Duplicate and parallel evaluations of the Tenax TA and Carbotech showed an average difference of < 17% in VOC concentrations within the sampling methods, but a systematic difference between the methods (Tenax TA: Carbotech concentration ratio = 1.18-2.36). These field evaluations and quality assurance tests showed that interpretation and comparison of the results in any VOC monitoring exercise should be done on a compound by compound basis. It is also apparent that carefully planned and realised QA and QC (QA/QC) procedures are needed in multi-centre studies, where a common sampling method and laboratory analysis technique are not used, to strengthen and simplify the interpretation of observed VOC levels between participating centres.     

Attachment behavior and health: relationships at work and home

This article examines the relationships between interpersonal attachment orientations, health, and social support. Four hypotheses specified relationships between three interpersonal attachment orientations (interdependent, counterdependent, and overdependent), physical and psychological symptoms, and social support. Data were collected from 297 students, the majority of whom were also full-time employees. An interdependent orientation was negatively related to social dysfunction. Counterdependent and overdependent orientations were negatively related to health. A counterdependent orientation was negatively related to social support, while an overdependent orientation was positively related to social support from co-workers and family. Copyright © 1999 John Wiley & Sons, Ltd.     

Antipredator behavior of a social desert rodent: footdrumming and alarm calling in the great gerbil, Rhombomys opiums

We sought to understand why a social, desert rodent, the great gerbil, Rhombomys opimus, expends energy and possible risk of predation by footdrumming and vocalizing in the presence of a diversity of terrestrial predators: snakes, monitor lizards, polecats, foxes, and humans. Behavioral observations, human approaches, and experiments with tethered predators revealed that both male and female gerbils called and footdrummed in the presence of offspring, close relatives, and potential mates. Because adults called more often when pups were present, and solitary gerbils seldom gave an alarm, the alarm behavior probably warns conspecifics, especially vulnerable offspring, of potential danger. We also found that gerbils altered alarm behavior with the type of predator. They drummed more in the burrow when a dog that could not enter the burrow was present, and they drummed more out of the burrow in response to a snake that could enter the burrow. Gerbils vocalized and stood in an alert posture in response to all stimuli. The different footdrumming responses of gerbils to terrestrial predators seems related to the hunting style and type of risk posed by the predator, especially its ability to enter the burrow system. Received: 23 August 1999 / Received in revised form: 6 December 1999 / Accepted: 25 February 2000     

First-order kinetic gas generation model parameters for wet landfills

Landfill gas collection data from wet landfill cells were analyzed and first-order gas generation model parameters were estimated for the US EPA landfill gas emissions model (LandGEM). Parameters were determined through statistical comparison of predicted and actual gas collection. The US EPA LandGEM model appeared to fit the data well, provided it is preceded by a lag phase, which on average was 1.5 years. The first-order reaction rate constant, k, and the methane generation potential, L(o), were estimated for a set of landfills with short-term waste placement and long-term gas collection data. Mean and 95% confidence parameter estimates for these data sets were found using mixed-effects model regression followed by bootstrap analysis. The mean values for the specific methane volume produced during the lag phase (V(sto)), L(o), and k were 33 m(3)/Megagrams (Mg), 76 m(3)/Mg, and 0.28 year(-1), respectively. Parameters were also estimated for three full scale wet landfills where waste was placed over many years. The k and L(o) estimated for these landfills were 0.21 year(-1), 115 m(3)/Mg, 0.11 year(-1), 95 m(3)/Mg, and 0.12 year(-1) and 87 m(3)/Mg, respectively. A group of data points from wet landfills cells with short-term data were also analyzed. A conservative set of parameter estimates was suggested based on the upper 95% confidence interval parameters as a k of 0.3 year(-1) and a L(o) of 100 m(3)/Mg if design is optimized and the lag is minimized.     

Decabromodiphenyl ether (deca-BDE) commercial mixture components, and other PBDEs, in airborne particles at a UK site

The occurrence of the major components of the decabromodiphenyl ether (deca-BDE) flame retardant and other PBDEs was investigated in daily air particulate samples from 17th April to 20th May 2004 at a semi-rural site in north-west England. BDE-209 was found at between <0.49 and 100 pg m(-3) (median 13 pg m(-3)), and other higher-brominated PBDE congeners were also found, particularly the nona-BDEs (e.g. BDE-207: <0.042-79 pg m(-3), median 2.5 pg m(-3)). Deca- and nona-BDEs dominated the median particulate sample congener profile: 60% BDE-209, 16% BDE-207, 6% BDE-208 and 4% BDE-206. Nona-BDEs were greatly enriched, relative to BDE-209, compared to the deca-BDE commercial mixture, which may suggest degradation of BDE-209 between source and sampling site, or release from older deca-BDE commercial mixtures, which may have contained higher proportions of nona-BDEs. The highest PBDE concentrations occurred when air-masses passed over urban and industrial areas to the SSW-SW, though small local influences may also be seen. PBDE concentrations appear to have been influenced mainly by particle levels: 1-3 microm diameter particles for BDE-153, and 3-10 microm particles for BDEs with 7-10 Br atoms. BDE-153 may either be released from combustion sources, or re-condense onto small particles after emission, whereas BDE-209 and nona-BDEs appear to be associated with larger dust particles from industrial or domestic sources.