Composting of miscible cellulose acetate propionate-aliphatic polyester blends

A series of miscible blends consisting of cellulose acetate propionate (CAP) and poly(ethylene glutarate) (PEG) or poly(tetramethylene glutarate) (PTG) were evaluated in a static bench-scale simulated municipal compost environment. Samples were removed from the compost at different intervals, and the weight loss was determined before evaluation by gel permeation chromatography, scanning electron microscopy, and¹H NMR. The type of polyester (PEG versus PTG) in the blend made no difference in composting rates. At fixed CAP degree of substitution (DS), when the content of polyester in the blend was increased, the rate of composting and the weight loss due to composting increased. When the CAP was highly substituted, little degradation was observed within 30 days and almost all of the weight loss was ascribed to loss of polyester. Although the polyester was still observed to degrade faster, when the CAP DS was below approximately 2.0, both components are observed to degrade. The data suggests that initial degradation of the polyester is by chemical hydrolysis and the rate of this hydrolysis is very dependent upon the temperature profile of the compost and upon the DS of the CAP.     

Mobility of Polychlorinated Aromatic Compounds in Soils Contaminated With Wood-preserving Oil

Greater understanding of the mobility of polychlorinated aromatic compounds in soils is needed to investigate contamination and design suitable remediation strategies for sites contaminated with wood-preserving oil. The objectives of this study were (1) to develop a suitable aqueous batch extraction method for soil containing wood-preservative residues; (2) to determine partition coefficients for the primary contaminants [pentachlorophenol (PCP), polychlorinated dibenzo-p-dloxins (PCDDs), and polychlorinated dibenzofurans (PCDFS)] in oil, soil, and aqueous phases; and (3) to evaluate the potential soil migration of the primary contaminants. In a three-phase oil-soil-water mixture, PCP, PCDDs, and PCDFs were partitioned to the greatest extent in the oil phase. These results suggest that the migration of contaminants can occur in a saturated subsurface soil zone containing an oil phase at a wood-preserving site. In the absence of a free oil phase, PCDDs and PCDFs were highly partitioned onto soil and were considered non-leachable in the aqueous phase. However, PCP was considered highly teachable from contaminated soil containing only an aqueous liquid phase. Results from this study Indicate that removal of any free oil phase present in subsurface soil should have highest priority during the cleanup of contaminated wood-preserving sites.     

Comparison of Laboratory Batch Methods and Large Columns for Evaluating Leachate from Monofilled Solid Wastes

Analyte concentrations in aqueous leachates from polyethylene tanks filled with five different solid wastes were compared with those in extracts from five laboratory batch procedures. Solid wastes used in the study included: electroplating sludge, electric arc furnace dust, paint Incinerator ash, mine tailings, and municipal refuse incinerator ash. Batch extraction procedures used to extract the solid wastes Included: Monofilled Waste Extraction Procedure (MWEP), U.S. EPA Extraction Procedure (EP), Ham Procedure C (HAM-C), Acetate Buffer Extraction Procedure (ABEP), and Saturated Paste Procedure (PASTE).

Analyte concentrations in leachate from the large columns were reproducible and characteristic of each solid waste. In most Instances, analytes in column leachate reached a peak concentration at a liquld-to-solid ratio of 1:1 followed by a gradual to rapid decrease with continued leaching. Analyte concentrations found in large column leachate were related qualitatively to those found in extracts from the batch procedures which used delonlzed water as the extraction medium (i.e., MWEP, HAM-C, and PASTE). Batch extraction procedures using leaching medium containing acetic acid (I.e., EP) or sodium acetate buffer (i.e., ABEP) generally did not reflect analyte concentrations in leachate from the large columns. These results suggest that batch extraction procedures using acetic acid or acetate buffer are less effective for assessing the teachability of monofilled wastes than extraction methods using deionized water as the extraction fluid.     

Modeling microbiological and chemical processes in municipal solid waste bioreactor,part II: Application of numerical model BIOKEMOD-3P

Biodegradation process modeling of municipal solid waste (MSW) bioreactor landfills requires the knowledge of various process reactions and corresponding kinetic parameters. Mechanistic models available to date are able to simulate biodegradation processes with the help of pre-defined species and reactions. Some of these models consider the effect of critical parameters such as moisture content, pH, and temperature. Biomass concentration is a vital parameter for any biomass growth model and often not compared with field and laboratory results. A more complex biodegradation model includes a large number of chemical and microbiological species. Increasing the number of species and user defined process reactions in the simulation requires a robust numerical tool. A generalized microbiological and chemical model, BIOKEMOD-3P, was developed to simulate biodegradation processes in three-phases (Gawande et al. 2009). This paper presents the application of this model to simulate laboratory-scale MSW bioreactors under anaerobic conditions. BIOKEMOD-3P was able to closely simulate the experimental data. The results from this study may help in application of this model to full-scale landfill operation.     

Distribution of polychlorinated biphenyls and chlorinated pesticide residues in trout in the Sierra Nevada

Organochlorine compounds are known to be atmospherically transported to long distances from their original sources. To understand the influence of California's Sierra Nevada range on the air transport and subsequent distribution pattern of some of these residues within the range, we have chosen salmonid fish as an indicator species. Fish were collected from 10 locations throughout the northern and central Sierra Nevada and polychlorinated biphenyl (PCB), toxaphene, chlordane, and DDT [1,1,1-trichloro, 2,2'-bis (p-chlorophenyl) ethane] residues in muscle tissue were analyzed. Rainbow trout (Oncorhynchus mykiss) were found in all sampling locations, and therefore analyses mainly focused on this species. When similar-sized rainbow trout samples from several similar oligotrophic, high-altitude lakes and streams were compared, it became apparent that altitude is one of the factors affecting the residual levels of PCB (r(2) = 0.882), but not for total DDT, toxaphene, or chlordane in trout. Analysis of correlations among these four organochlorine compound residue groups indicated that there are modest correlations in patterns of distribution between chlordane vs. toxaphene (r(2) = 0.345), and chlordane vs. total DDT (r(2) = 0.239), but toxaphene residues are not correlated with PCB or total DDT. In view of significant correlation to the altitude it is concluded that PCB residue in rainbow trout is a good monitoring tool for studying the effect of high-altitude mountain ranges on the long-range transport and distribution of those persistent pollutants.     

Organizational socialization: A stress perspective

This paper examines socialization and adjustment processes of newcomers to organizations. While scholars in this area agree that the socialization process is a stressful event, few have empirically approached the process from this perspective. In addressing this problem, a theoretical synthesis of the literatures of organizational socialization and organizational stress is proposed. From this integration, a model is developed which facilitates an examination of the task, role, and interpersonal demands which individuals face in the stages of socialization and an analysis of the interrelationships of these demands and their effects upon individual and organizational outcomes of the socialization process. Finally, directions for future research are proposed for extending understanding of this crucial part of organizational entry.     

Airborne emissions of mercury from municipal solid waste. II: potential losses of airborne mercury before landfill

Waste distribution and compaction at the working face of municipal waste landfills releases mercury vapor (Hg(o)) to the atmosphere, as does the flaring of landfill gas. Waste storage and processing before its addition to the landfill also has the potential to release Hg(o) to the air if it is initially present or formed by chemical reduction of Hg(II) to Hg(o) within collected waste. We measured the release of Hg vapor to the atmosphere during dumpster and transfer station activities and waste storage before landfilling at a municipal landfill operation in central Florida. We also quantified the potential contribution of specific Hg-bearing wastes, including mercury (Hg) thermometers and fluorescent bulbs, and searched for primary Hg sources in sorted wastes at three different landfills. Surprisingly large fluxes were estimated for Hg losses at transfer facilities (approximately 100 mg/hr) and from dumpsters in the field (approximately 30 mg/hr for 1000 dumpsters), suggesting that Hg emissions occurring before landfilling may constitute a significant fraction of the total emission from the disposal/landfill cycle and a need for more measurements on these sources. Reducing conditions of landfill burial were obviously not needed to generate strong Hg(o) signals, indicating that much of the Hg was already present in a metallic (Hg(o)) form. Attempts to identify specific Hg sources in excavated and sorted waste indicated few readily identifiable sources; because of effective mixing and diffusion of Hg(o), the entire waste mass acts as a source. Broken fluorescent bulbs and thermometers in dumpsters emitted Hg(o) at 10 to >100 microg/hr and continued to act as near constant sources for several days.     

Airborne emissions of mercury from municipal solid waste. I: new measurements from six operating landfills in Florida

Mercury-bearing material enters municipal landfills from a wide array of sources, including fluorescent lights, batteries, electrical switches, thermometers, and general waste; however, the fate of mercury (Hg) in landfills has not been widely studied. Using automated flux chambers and downwind atmospheric sampling, we quantified the primary pathways of Hg vapor releases to the atmosphere at six municipal landfill operations in Florida. These pathways included landfill gas (LFG) releases from active vent systems, passive emissions from landfill surface covers, and emissions from daily activities at each working face (WF). We spiked the WF at two sites with known Hg sources; these were readily detected downwind, and were used to test our emission modeling approaches. Gaseous elemental mercury (Hg(O)) was released to the atmosphere at readily detectable rates from all sources measured; rates ranged from approximately 1-10 ng m(-2) hr(-1) over aged landfill cover, from approximately 8-20 mg/hr from LFG flares (LFG included Hg(O) at microg/m3 concentrations), and from approximately 200-400 mg/hr at the WF. These fluxes exceed our earlier published estimates. Attempts to identify specific Hg sources in excavated and sorted waste indicated few readily identifiable sources; because of effective mixing and diffusion of Hg(O), the entire waste mass acts as a source. We estimate that atmospheric Hg releases from municipal landfill operations in the state of Florida are on the order of 10-50 kg/yr, substantially larger than our original estimates, but still a small fraction of current overall anthropogenic losses.     

Large-scale baseload wind power in China

This paper presents a novel strategy for developing wind power in large-scale (multi-GW) wind farms in China. It involves combining oversized wind farms, large-scale electrical storage and long-distance transmission lines to deliver 'baseload wind power' to distant electricity demand centers. Baseload wind power is typically more valuable to the electric utility than intermittent wind power, so that storage can be economically attractive even in instances where the cost per kWh is somewhat higher than without storage.
The prospective costs for this approach to developing wind power are illustrated by modifying an oversized wind farm at Huitengxile, Inner Mongolia. The site has an average power density of 580 W/m² at 50 m hub heights and is located 500 km north of Beijing. Using locally mass-produced wind turbines there are good prospects that wind power would be cost-competitive with coal power, on a lifecycle cost basis, while providing substantial net environmental benefits.
Finally, the institutional challenges related to the prospect of large-scale wind energy development are addressed. Especially important are policies aimed at developing the capacity for mass production of as much of this technology in China as is feasible. Promising instruments for speeding up the introduction of this technology include: (i) international joint ventures between foreign vendors and developers and Chinese manufacturers; and (ii) wind resource development concessions.