An Estimation of Construction and Demolition Debris in Seoul,Korea: Waste Amount,Type, and Estimating Model

ABSTRACT

Construction and demolition (C&D) debris is generated at the site of various construction activities. However, the amount of the debris is usually so large that it is necessary to estimate the amount of C&D debris as accurately as possible for effective waste management and control in urban areas. In this paper, an effective estimation method using a statistical model was proposed. The estimation process was composed of five steps: estimation of the life span of buildings; estimation of the floor area of buildings to be constructed and demolished; calculation of individual intensity units of C&D debris; and estimation of the future C&D debris production. This method was also applied in the city of Seoul as an actual case, and the estimated amount of C&D debris in Seoul in 2021 was approximately 24 million tons. Of this total amount, 98% was generated by demolition, and the main components of debris were concrete and brick.     

Proteomic analysis in Daphnia magna exposed to As(III), As(V) and Cd heavy metals and their binary mixtures for screening potential biomarkers

In this study, the effects of three widespread heavy metals, As(III), As(V) and Cd, and their binary mixtures on the proteomic profile in D. magna were examined to screen novel protein biomarkers using the two-dimensional gel electrophoresis method (2DE). Ten 20d daphnia were exposed to the LC20 concentrations for each of a total of 8 treatments, including the control, As(III), As(V), Cd, [As(III)+As(V)], [As(III)+Cd], [As(V)+Cd], and [As(III), As(V), Cd], for 24 h before protein isolation. Three replicates were performed for each treatment. These protein samples were employed for 2DE experiments with a pH gradient gel strip from pH 3 to pH 10. The protein spots were detected by a silver staining process and their intensities were analyzed by Progenesis software to discover the differentially expressed proteins (DEPs) in response to each heavy metal. A total of 117 differentially expressed proteins (DEPs) were found in daphnia responding to the 8 treatments and mapped onto a 2D proteome map, which provides some information of the molecular weight (MW) and pI value for each protein. All of these DEPs are considered as potential candidates for protein biomarkers in D. magna for detecting heavy metals in the aquatic ecosystem. Comparing the proteomic results among these treatments suggested that exposing D. magna to binary mixtures of heavy metals may result in some complex interactive molecular responses within them, rather than just the simple sum of the proteomic profiles of the individual chemicals, (As(III), As(V), and Cd).     

Identification of the sources of PM10 in a subway tunnel using positive matrix factorization

The level of particulate matter of less than 10 μm diameter (PM₁₀) at subway platforms can be significantly reduced by installing a platform screen-door system. However, both workers and passengers might be exposed to higher PM₁₀ levels while the cars are within the tunnel because it is a more confined environment. This study determined the PM₁₀ levels in a subway tunnel, and identified the sources of PM₁₀ using elemental analysis and receptor modeling. Forty-four PM₁₀ samples were collected in the tunnel between the Gireum and Mia stations on Line 4 in metropolitan Seoul and analyzed using inductively coupled plasma–atomic emission spectrometry and ion chromatography. The major PM₁₀ sources were identified using positive matrix factorization (PMF). The average PM₁₀ concentration in the tunnels was 200.8 ± 22.0 μg/m³. Elemental analysis indicated that the PM₁₀ consisted of 40.4% inorganic species, 9.1% anions, 4.9% cations, and 45.6% other materials. Iron was the most abundant element, with an average concentration of 72.5 ± 10.4 μg/m³. The PM₁₀ sources characterized by PMF included rail, wheel, and brake wear (59.6%), soil combustion (17.0%), secondary aerosols (10.0%), electric cable wear (8.1%), and soil and road dust (5.4%). Internal sources comprising rail, wheel, brake, and electric cable wear made the greatest contribution to the PM₁₀ (67.7%) in tunnel air.

ImplicationsWith installation of a platform screen door, PM₁₀ levels in subway tunnels were higher than those on platforms. Tunnel PM₁₀ levels exceeded 150 μg/m³ of the Korean standard for subway platform. Elemental analysis of PM₁₀ in a tunnel showed that Fe was the most abundant element. Five PM₁₀ sources in tunnel were identified by positive matrix factorization. Railroad-related sources contributed 68% of PM₁₀ in the subway tunnel.     

Kinetics of reductive denitrification by nanoscale zero-valent iron

Zero-valent iron powder (Fe0) has been determined to be potentially useful for the removal of nitrate in the water environment. This research is aimed at subjecting the kinetics of denitrification by nanoscale Fe0 to an analysis of factors affecting the chemical denitrification of nitrate. Nanoscale iron particles with a diameter in the range of 1-100 nm, which are characterized by the large BET specific surface area to mass ratio (31.4 m2/g), removed mostly 50, 100, 200, and 400 mg/l of nitrate within a period of 30 min with little intermediates. Compared with microscale (75-150 microm) Fe0, end product is not ammonia but N2 gas. Kinetics analysis from batch studies revealed that the denitrification reaction with nanoscale Fe0 appeared to be a pseudo first-order with respect to substrate and the observed reaction rate constant (k(obs)) varied with iron content at a relatively low degree of application. The effects of mixing intensity (rpm) on the denitrification rate suggest that the denitrification appears to be coupled with oxidative dissolution of iron through a largely mass transport-limited surface reaction (<40 rpm).     

Dry scrubbing of municipal solid waste incineration flue gas using porous sodium carbonate produced via vacuum thermal treatment of sodium bicarbonate

Journal of Material Cycles and Waste Management - Sodium bicarbonate is among the alkali chemicals used for dry scrubbing in incineration flue gas treatment. It is generally pulverized into fine...     

Modelling of a large-scale urban contamination situation and remediation alternatives

The Urban Remediation Working Group of the International Atomic Energy Agency's EMRAS (Environmental Modelling for Radiation Safety) program was organized to address issues of remediation assessment modelling for urban areas contaminated with dispersed radionuclides. The present paper describes the first of two modelling exercises, which was based on Chernobyl fallout data in the town of Pripyat, Ukraine. Modelling endpoints for the exercise included radionuclide concentrations and external dose rates at specified locations, contributions to the dose rates from individual surfaces and radionuclides, and annual and cumulative external doses to specified reference individuals. Model predictions were performed for a “no action” situation (with no remedial measures) and for selected countermeasures. The exercise provided a valuable opportunity to compare modelling approaches and parameter values, as well as to compare the predicted effectiveness of various countermeasures with respect to short-term and long-term reduction of predicted doses to people.     

Associations of fat mass and lean mass with bone mineral density differ by levels of persistent organic pollutants: National Health and Nutrition Examination Survey 1999-2004

Persistent organic pollutants (POPs), xenobiotics that accumulate in fat tissue, may impair bone metabolism. We studied (1) the association of bone mineral density (BMD) with POPs and (2) whether associations of fat mass (FM) or lean mass (LM), two components of body composition, with BMD differed depending on levels of POPs. Participants aged ?20 in the National Health and Nutrition Examination Survey 1999-2004 were included (n = 2769). Eight POPs with detection rate ?80% and three skeletal subregions (left arm, pelvis, and right leg) were selected. All analyses were stratified by gender and age (cutpoint 50 years or more). POPs at background concentrations were mostly unassociated with BMD. However, the associations of FM and LM with BMD depended on POPs concentrations, in particular with BMD of the left arm (usually not weight-bearing) in postmenopausal women. When POPs concentrations were low, FM showed inverse associations with BMD while LM showed positive associations. However, when POPs levels were high, FM showed positive associations with BMD while the positive associations between LM and BMD weakened. POPs may biologically modify the associations of FM and LM with BMD, especially among postmenopausal women, possibly explaining inconsistent associations between FM and BMD in previous epidemiological studies.     

Comparison of endotoxin levels and gram-negative bacteria under different conditions in microbial laboratories and a biowaste site

In this study, we assessed airborne endotoxin levels in university laboratories, hospital diagnostic laboratories, and a biowaste site. We also investigated indoor and outdoor sampling, sampling site, type of ventilation system, presence of open biowaste boxes, weather, and detection of Gram-negative bacteria (GNB). A total of 69 air samples were collected from 11 facilities in three institutions. Average total airborne endotoxin levels ranged from <0.01 to 10.02 EU m⁻³, with an overall mean of 1.03 EU m⁻³. Endotoxin levels were high in window-ventilated facilities, in facilities in which GNB were detected; levels were also high when it was rainy (all ps < 0.05). Endotoxin levels were significantly correlated with humidity (r = 0.70, p < 0.01). The presence of HVAC; humidity; and the presence of open biowaste boxes affect endotoxin levels in laboratories.     

Two-generation toxicity study on the copepod model species Tigriopus japonicus

Previous studies on the intertidal copepod Tigriopus japonicus have demonstrated that it is a suitable model species for the assessment of acute toxicities of marine pollutants. In order to standardize T. japonicus for use in environmental risk assessment involving whole life cycle exposure, we tested nine pollutants for their effects on growth and reproduction during a two-generation life cycle exposure test. Nauplii (F 0) were exposed to a range of concentrations of each chemical in a static renewal culture system. Broods of the second generation (F1) were subsequently exposed to the same concentrations for one full life cycle. Of the seven traits (nauplius phase, development time, survival, sex ratio, number of clutch, nauplii per clutch and fecundity), only the length of the nauplius phase and development time showed a greater sensitivity to chemical exposure. Between the two sensitive traits, the period of the nauplius phase was more sensitive than cohort generation time. Biocides significantly increased the maturation period of nauplii as well as copepodids in F 0 generation. In this study, it was demonstrated that T. japonicus could also be used in reproduction and life cycle tests and it provides an opportunity for testing the chronic and subchronic toxic effects of marine pollutants. Further validation and harmonization in a multi-centric study involving other laboratories of the region will strengthen its use as a supplement to existing model species.     

Manganese peroxidase-catalyzed oxidative degradation of vanillylacetone

When 4-(4-hydroxy-3-methoxy-phenyl)-2-butanone (vanillylacetone) was tested for manganese peroxidase (MnP)-catalyzed oxidation, it was found to be degraded with the cleavage of an aromatic ring. Among numerous products of vanillylacetone oxidation, four major ones were purified by thin-layer chromatography and identified using mass spectroscopy (MS) and nuclear magnetic resonance (NMR) analysis. Three of them maintained the aromatic ring structure and were identified as 4-[6,2'-dihydroxy-5,3'-dimethoxy-5'-(3-oxo-butyl)-biphenyl]-butan-2-one, 4-(4-hydroxy-3-methoxyphenyl)-3-buten-2-one, and 4-[6,2'-dihydroxy-5,3'-dimethoxy-5'-(3-oxo-butyl)-biphenyl]-3-buten-2-one. Even though the fourth product could not be purified to a single compound, data from infrared spectroscopy showed that it did not have a benzene ring. From MS and NMR analysis, 3-(3-oxo-butyl)-hexa-2,4-dienedioic acid-1-methyl ester was tentatively suggested as the dominant species. The reaction mechanism was suggested on the basis of the structural information of these products. To our knowledge, this paper is the first report on aromatic ring cleavage of the phenolic compound by MnP.