ESTIMATING THE Q100 IN BRITISH COLUMBIA: A PRACTICAL PROBLEM IN FOREST HYDROLOGY1

ABSTRACT. Estimates of peak flows, with specified return periods, are needed in practice for the design of works that affect streams in forested areas. In the province of British Columbia (B.C.), Canada, the new Forest Practices Code specifies the 100-year instantaneous peak flow (Q100) for the design of bridges and culverts for stream crossings under forest roads; and many practitioners are engaged in making such estimates. The state of the art is still quite primitive, very similar to the state of urban hydrology 30 years ago, when popular estimating techniques were used with little consideration given to their applicability. Urban hydrology then evolved on a much more scientific basis, such that within about a 10-year period, standard approaches to design were developed. Forest hydrology should follow the same pattern, at least as far as estimating design flows is concerned. Popular present day design procedures include the rational method and other empirical approaches based on rainfall data, as use of the standard flood frequency approach is limited by the paucity of relevant flow data. Estimating procedures based on peak streamflow measurements and statistics are likely to evolve, and these will include distinctions for rain, snowmelt, and rain on snow floods. Guidelines will also be developed for selecting and applying appropriate procedures for particular areas.     

Methods for sampling and analysis of tropospheric ethanol in gaseous and aqueous phases

In this paper, we report on techniques for sampling and measuring ethanol in both the gas and aqueous phases of the lower troposphere. In the gas phase, the best sampling conditions were ensured by adsorption on Hayesep Q with a Chromosorb W AW coated with LiCl dryer (method 1) or by cryogenic trapping (method 2). An intercomparison campaign showed good agreement between both methods under various conditions. Method 1 (adsorption on Hayesep Q with dryer) is easier to set up and to carry away from the laboratory. Method 2 (cryogenic trapping) requires longer sampling time (up to 60 min while method 1 requires only 10-15 min). Method 1 is adapted to high concentrations of ethanol (>20 ppb) and low relative humidity (<30%). Method 2 gives more accurate results than method 1 for low ethanol concentrations (1-20 ppb). Comparing these results to previous studies, it is clear that sampling with appropriate solid adsorbents or with stainless steel canisters (with appropriate humidified air and short storage time) is adapted to urban or industrial environments where ethanol concentrations are high. Cryogenic sampling must be preferred for remote places where ethanol concentrations are low. Three techniques were tested for sampling ethanol in the liquid phase, namely solid phase microextraction, purge and trap injection, and direct injection. Among those, the latter was chosen for field measurements of ethanol in rain samples at an urban location. These first ever results at an urban location show concentrations ranging from <1 to 5 microM in rains, which agree with the expected range of concentrations. However, the purge and trap method showed detection limits that were 50 times lower and should be preferred for liquid phase ethanol measurements in rural and remote locations. Combining cryogenic trapping for the gas phase (method 2) and direct injection for the liquid phase is convenient and well adapted for a multiphase study of ethanol in the atmosphere, where simultaneous measurements in both phases are needed.     

Transesterification of Caesalpinia eriostachys seed oil using heterogeneous and homogeneous basic catalysts

Caesalpinea eriostachys seed oil, as a source of triglycerides with potential application for biodiesel production in Mexico is introduced. Its lipid profile obtained by Gas Chromatography-Mass Spectrometry (GC-MS) revealed saturated and unsaturated glycerol esters as the constituents. Therefore, heterogeneous and homogeneous catalyzed transesterification reactions were assayed employing ZnAl hydrotalcites and KOH, as the catalysts, respectively. The transesterification reactions yielded 59% for Zn/Al(2), 79% for Zn/Al(4), and 90% for KOH, depicting typical behavior, as in biodiesel production data from literature, where Zn-Al hydrotalcites or KOH were assayed. The caloric, density, viscosity values, and fatty acid methyl esters profile from reaction products were concordant to EN 14214, suggesting C. eriostachys as a promising feedstock for biodiesel production.     

Does globalization and energy usage influence carbon emissions in South Asia? An empirical revisit of the debate

Environmental Science and Pollution Research - The 2030 United Nations Sustainable Development Goal (SDG) 13 agenda hinges on attaining a sustainable environment with the need to “take urgent...     

Dissolution behavior of metals from particulate matter emissions

Exposure to air particulate matter (PM) is linked to numerous health effects. In order to improve the understanding of the role of its metallic components, their solubility was examined by using serial short-contact dissolutions totalling 1?h and additional sequential contact periods of 1, 4, and 8 days. The dissolution experiments were performed in solutions containing the main biological electrolytes. ICPMS determinations were used to quantify the dissolved metals. The total compositions were determined after closed vessel microwave digestion. Large variations in the rate and completeness of the dissolutions were observed. Fast and extensive dissolutions within the short-contact time (e.g., Zn, Cd) as well as slow dissolutions persisting during the last contact period (e.g., Ni, Cu, Sb, Pb) were found for smelting emissions. The multi-element determinations also made it possible to identify relationships between dissolution of different metals and define gradual composition changes of residual PM. When comparing with dissolutions performed in de-ionized water, similar major fractions were observed at short-contact time for minor components of smelting or combustion emissions (e.g., V, Ni, Cd), suggesting a preponderance of easily available forms at the surface of the relatively inert particle cores. The use of these time sequential methods may help in (1) modeling metal partitioning in biological media and (2) investigating the causes of adverse effects attributed to air PM.     

The effects of direct and indirect constraints on biological communities

Human activities are expected to result in a diversity of directional or stochastic constraints that affect species either directly or by indirectly impacting their resources. However, there is no theoretical framework to predict the complex and various effects of these constraints on ecological communities. We developed a dynamic model that mimics the use of different resource types by a community of competing species. We investigated the effects of different environmental constraints (affecting either directly the growth rate of species or having indirect effects on their resources) on several biodiversity indicators. Our results indicate that (i) in realistic community models (assuming uneven resource requirements among species) the effects of perturbations are strongly buffered compared to neutral models; (ii) the species richness of communities can be maximized for intermediate levels of direct constraints (unimodal response), even in the absence of trade-off between competitive ability and tolerance to constraints; (iii) no such unimodal response occurs with indirect constraints; (iv) an increase in the environmental (e.g., climatic) variance may have different effects on community biomass and species richness.     

A New Rationale for Not Picking Low-Hanging Fruits: the Separation of Ownership and Control

Recent attempts at explaining the energy-efficiency gap rely on considerations related to organizational and behavioral/cognitive failures. In this paper, we build on the strategic delegation literature to advance a complementary explanation. We show that strategic market interaction may encourage business owners to instill a bias against energy efficiency in managerial compensation contracts. Since managers respond to financial incentives, their decisions will reflect this bias, resulting in a lack of investment.

     

Differential blood counting in fish as a non-destructive biomarker of water contamination exposure

Differential white blood cell counting was performed on blood from the fish species Oreochromis niloticus and was used as an in situ indicator of the species’ exposure to contamination. Ten young fish were collected in an area influenced by the discharge of effluents and from a fish farm (control group). The fish were anesthetized and caudal puncture was used to collect the blood. Differential white blood cell counting was performed, as well as the counting of total leukocytes and thrombocytes (in 2000 cells). Physicochemical parameters of the water from both sites were analyzed. The water from the polluted area was found to have high conductivity and low levels of dissolved oxygen, factors that indicate poor environmental quality. Fish collected from the polluted site presented higher percentages of eosinophils and monocytes and fewer thrombocytes because of exposure to pollution and hypoxic conditions. The differential white blood cell count represents a suitable biomarker of environmental health and provides a tool for biomonitoring water quality.