Ambient measurements of 2,2,4-trimethyl, 1,3-pentanediol monoisobutyrate in Southern California

2,2,4-trimethyl, 1,3-pentanediol monoisobutyrate (TPM) is a widely used solvent found in water-based coatings. Ambient measurements of TPM are reported here for the first time. Although this compound has been previously measured in indoor air, this study illustrates successful detection and quantification of TPM in ambient air at three locations in Southern California: Pico Rivera, Azusa, and Riverside. TPM was detected in every sample collected, with concentrations ranging from 0.7 to 49.5 parts per trillion (ppt). Collections took place during summer 2009, fall 2009, winter 2009/2010, and spring 2010, for 5-7 days during each season. The highest mean concentrations were observed during the summer months for each city, when coating activities are typically at their highest.     

Results of Community Deliberation About Social Impacts of Ecological Restoration: Comparing Public Input of Self-Selected Versus Actively Engaged Community Members

Participatory processes for obtaining residents' input about community impacts of proposed environmental management actions have long raised concerns about who participates in public involvement efforts and whose interests they represent. This study explored methods of broad-based involvement and the role of deliberation in social impact assessment. Interactive community forums were conducted in 27 communities to solicit public input on proposed alternatives for recovering wild salmon in the Pacific Northwest US. Individuals identified by fellow residents as most active and involved in community affairs ("AE residents") were invited to participate in deliberations about likely social impacts of proposed engineering and ecological actions such as dam removal. Judgments of these AE participants about community impacts were compared with the judgments of residents motivated to attend a forum out of personal interest, who were designated as self-selected ("SS") participants. While the magnitude of impacts rated by SS participants across all communities differed significantly from AE participants' ratings, in-depth analysis of results from two community case studies found that both AE and SS participants identified a large and diverse set of unique impacts, as well as many of the same kinds of impacts. Thus, inclusion of both kinds of residents resulted in a greater range of impacts for consideration in the environmental impact study. The case study results also found that the extent to which similar kinds of impacts are specified by AE and SS group members can differ by type of community. Study results caution against simplistic conclusions drawn from this approach to community-wide public participation. Nonetheless, the results affirm that deliberative methods for community-based impact assessment involving both AE and SS residents can provide a more complete picture of perceived impacts of proposed restoration activities.     

Quality control for sampling of PCDD/PCDF emissions from open combustion sources

Both long duration (>6 h) and high temperature (up to 139 °C) sampling efforts were conducted using ambient air sampling methods to determine if either high volume throughput or higher than ambient air sampling temperatures resulted in loss of target polychlorinated dibenzodioxins/dibenzofurans (PCDDs/PCDFs) from a polyurethane foam (PUF) sorbent. Emissions from open burning of simulated military forward operating base waste were sampled using EPA Method TO-9A for 185 min duration using a filter/PUF/PUF in series combination. After a 54 m³ sample was collected, the sampler was removed from the combustion source and the second PUF was replaced with a fresh, clean PUF. An additional 6 h of ambient air sampling (171 m³) was conducted and the second PUF was analyzed to determine if the PCDD/PCDF transferred from the filter and the first PUF. Less than 4.4% of the initial PCDD/PCDF was lost to the second PUF. To assess the potential for blow off of PCDD/PCDF analytes during open air sampling, the mobility of spiked mono- to hepta-PCDD/PCDF standards across a PUF sorbent was evaluated from ambient air temperatures to 145 °C with total volumes between 600 L and 2400 L. Lower molecular weight compounds and higher flow amounts increased release of the spiked standards consistent with vapor pressure values. At 600 L total sampled volume, the release temperature for 1% of the tetra-CDD (the lowest chlorinated homologue with a toxic compound) was 87 °C; increasing the volume fourfold reduced this temperature to 73 °C.     

Application of Computer Controlled High Resolution Mass Spectrometry to the Analysis of Air Pollutants

An AEI-MS9 high resolution mass spectrometer interfaced with a PDP-12 digital computer has been adapted for the multicomponent analysis of air pollutants. Air sampling techniques for particulate and gaseous pollutants have been developed which are compatible with the mass spectrometric system. A single stage impactor has been designed for sampling particulate matter of particle diameters greater than 1–2 μm. The remainder of the particulate matter is collected on a glass fiber filter. Gaseous pollutants are collected on a styrene-divinylbenzene copolymer (Chromosorb 102).

The particulate samples are introduced directly into the mass spectrometer utilizing a temperature programed insertion probe. Gaseous pollutants are desorbed from the copolymer directly into the mass spectrometer by heating. Analysis of composite mass spectral data is facilitated through the use of a digital computer utilizing newly developed computer programs. Final computer output yields qualitative and quantitative results for up to 300 pollutants. Organic pollutants identified in particulate matter include polycyclic aromatic compounds, alkyl chlorides, polychlorinated aromatics, substituted benzenes and organic acids. Composite quantitative results are reported for alkanes and alkenes in the following groups: C₁₅-C₃₀, C₃₀-C₅₀ and Cso-polymeric. Inorganic pollutants identified include As₄O₆, H₂SO_4/ (NH₄)₂SO₄, (NH₄)₂SO₃, NaHSO₄, NH₄NO_3/ NaNO₃, NH₄CI, SeO₂, I₂, elemental sulfur, and elemental cadmium.     

Utilization of Dry Calcium Based Flue Gas Desulfurization Waste as a Hazardous Waste Fixation Agent

Several designated hazardous wastes (metal plating waste, oil sludge, heavy metal processing sludge) were studied relative to potential detoxification using dry calcium based FGD sludges. The FGD waste was generated from a pilot scale system which utilized slurried lime, a spray drier, and a bag filter. Following detailed physical and chemical identification of the raw FGD and hazardous wastes, various mixtures were prepared and cured. In all cases, even with the organic sludge, a rigid structural material evolved due to the pozzolanic reactions occurring from the wetted dry FGD waste. Structural characteristics, physical character, and chemical leaching effects were evaluated. The solids were leached via both EPA-RCRA and ASTM proposed leaching procedures. In all cases, the hazardous constituents were retained and not leached. Finally, the feasibility of using dry FGD wastes as fixating materials is discussed.     

Modeling the Reduction of Vapor Phase Emissions from Surface Soils Due to Soil Matrix Effects: Porosity/Tortuosity Concepts

ABSTRACT

A major route for transport of volatile organic compounds within porous media is vapor phase diffusion. The diffusion rate through a porous medium is less than that through free-air due to the decreased cross-sectional area available for gas movement and the increased path length due to pore tortuosity. Numerous empirical expressions have been published that relate the diffusion coefficient in porous media to the diffusion coefficient in free-air (unobstructed gas phase). Published measurements of relative diffusivity and air-filled porosity were combined into a database. Empirical expressions available in the literature, including the popular Millington-Quirk equation, were evaluated along with a fourth-degree polynomial expression developed by the authors to determine the best type of equation to predict relative diffusivity as a function of air-filled porosity over the domain of values for porosity ranging from 0.071 to 1 for different types of materials. Mean square deviations were used as the statistical test to compare equations. The polynomial expression developed in this project produced a significantly different effective diffusion coefficient (1.3 x 10^-6 m²/sec) compared to values of 9.2 x 10^-6 m²/sec and 3.1 x 10^-6 m²/ sec predicted by forms of the Millington-Quirk equation for a specific case.     

Mercury Measurement and Its Control: What We Know,Have Learned,and Need to Further Investigate

ABSTRACT

Based on the available evidence of health effects, the U.S. Environmental Protection Agency (EPA) has been evaluating the need to regulate mercury releases to the environment. In response to the congressional mandates in The 1990 Clean Air Act Amendments (CAAA), the EPA has issued the Mercury Study Report and the Study of Hazardous Air Pollutant Emissions from Electric Utility Steam Generating Units Report. In spite of the enormous effort represented by these reports, as well as the efforts of both the U.S. Department of Energy (DOE) and the Electric Power Research Institute (EPRI), in conducting the field measurement programs that form the basis for these reports, a definitive answer on the need for mercury regulation has not been found. However, the EPA, as well as other regulatory agencies and health researchers, have suggested a "plausible link" between anthropogenic sources emitting mercury and the methylation, bioaccumulation in the food chain, and adverse health effects in humans and wildlife.     

Mercury Mass Balances: A Case Study of Two North Dakota Power Plants

ABSTRACT

The Energy & Environmental Research Center (EERC) conducted a mercury-sampling program to provide data on the quantity and forms of Hg emitted and on the Hg removal efficiency of the existing air pollution control devices at two North Dakota power plants—Milton R. Young Station and Coal Creek Station. Minnkota Power Cooperative, Great River Energy, the North Dakota Industrial Commission, and EPRI funded the project. The primary objective was to obtain accurate measurements of Hg released from each plant, as verified by a material balance. A secondary objective was to evaluate the ability of a mercury continuous emission monitor (CEM) to measure total Hg at the stack.

At both plants, speciated Hg measurements were made at the inlets and outlets of both the electrostatic precipi-tators (ESPs) and the flue gas desulfurization (FGD) systems. A Semtech Hg 2000 (Semtech Metallurgy AB) mercury CEM was used to measure the total Hg emissions at the stack in real time. Using these measurements and plant data, the measured Hg concentrations in the coal, FGD slurries, and ESP ash, a Hg mass flow rate was calculated at each sampling location. Excellent Hg mass balances were obtained (±15%). It was also found that the Hg was mostly in the elemental phase (~90%), and the small amount of oxidized Hg that was generated was removed by the FGD systems.

Insignificant amounts of particulate-bound Hg were measured at both plants. However, 10-20% of the elemental Hg measured prior to the ESP was converted to oxidized Hg across the ESP. The data show that, at these facilities, almost all of the Hg generated is being emitted into the atmosphere as elemental Hg. Local or regional deposition of the Hg emitted from these plants is not a concern. However, the Hg does become part of the global Hg burden in the atmosphere. Also, the evidence appears to indicate that elemental Hg is more difficult to remove from flue gas than oxidized Hg is.     

A Fabric Denuder for Sampling Semi-Volatile Species

ABSTRACT

A new style of diffusion denuder has been evaluated specifically for sampling HNO₃. A coated fabric is used as the denuder substrate, which can be loaded directly into a standard filter holder. This approach allows direct denuder sampling with no additional capital costs over filter sampling and simplifies the coating and extraction process.

Potential denuder materials and coatings were evaluated in the laboratory to test the removal efficiency. NaCl coatings were used to assess more than 20 materials for HNO₃ collection efficiency. Particle retention, which would cause a denuder to have a positive bias for gas concentration measurements, was evaluated by ambient air sampling using particulate sulfate as the reference aerosol. Particle retention varied from 0 to 15%, depending on the denuder material tested. The best performing material showed an average particle retention of less than 3%.

Denuder efficiency of four fabric materials was tested under ambient conditions to determine removal efficiency. The fabric denuder method was compared with a long path-length Fourier transform infrared (FTIR) spectrometer, a tunable diode laser absorption spectrometer (TDLAS), and a denuder difference sampler to independently measure HNO₃. HNO₃ collection efficiency was typically 90% for the denuders, whether coated with NaCl or not. For 10-L/min sampling rates with the fabric denuder, the square of the correlation coefficient with the FTIR spectrometer was 0.73, compared to 0.24 with the TDLAS.