ECONOMIC COSTS AND BENEFITS OF INSTREAM FLOW PROTECTION FOR ENDANGERED SPECIES IN AN INTERNATIONAL BASIN1

ABSTRACT: The U.S. Endangered Species Act (ESA) restricts federal agencies from carrying out actions that jeopardize the continued existence of any endangered species. The U.S. Supreme Court has emphasized that the language of the ESA and its amendments permits few exceptions to the requirement to give endangered species the highest priority. This paper estimates economic costs associated with one measure for increasing instream flows to meet critical habitat requirements of the endangered Rio Grande silvery minnow. Impacts are derived from an integrated regional model of the hydrology, economics, and institutions of the upper Rio Grande Basin in Colorado, New Mexico, Texas, and Mexico. One proposal for providing minimum streamflows to protect the silvery minnow from extinction would provide guaranteed year round streamflows of at least 50 cubic feet per second in the San Acacia reach of the upper Rio Grande. These added flows can be accomplished through reduced surface diversions by New Mexico water users in dry years when flows would otherwise be reduced below the critical level required by the minnow. Based on a 44‐year simulation of future inflows to the basin, we find that some agricultural users suffer damages, but New Mexico water users as a whole do not incur damages from a policy that reduces stream depletions sufficiently to provide habitat for the minnow. The same policy actually benefits downstream users, producing average annual benefits of over $200,000 per year for west Texas agriculture, and over $1 million for El Paso municipal and industrial water users, respectively. Economic impacts of instream flow deliveries for the minnow are highest in drought years.     

A Conceptual Framework for Selecting and Analyzing Stressor Data to Study Species Richness at Large Spatial Scales

/ In this paper we develop a conceptual framework for selectingstressor data and analyzing their relationship to geographic patterns ofspecies richness at large spatial scales. Aspects of climate and topography,which are not stressors per se, have been most strongly linked withgeographic patterns of species richness at large spatial scales (e.g.,continental to global scales). The adverse impact of stressors (e.g., habitatloss, pollution) on species has been demonstrated primarily on much smallerspatial scales. To date, there has been a lack of conceptual developmenton how to use stressor data to study geographic patterns of speciesrichness at large spatial scales.The framework we developed includes four components: (1) clarification of theterms stress and stressor and categorization of factors affecting speciesrichness into three groups-anthropogenic stressors, natural stressors, andnatural covariates; (2) synthesis of the existing hypotheses for explaininggeographic patterns of species richness to identify the scales over whichstressors and natural covariates influence species richness and to providesupporting evidence for these relationships through review of previousstudies; (3) identification of three criteria for selection of stressor andcovariate data sets: (a) inclusion of data sets from each of the threecategories identified in item 1, (b) inclusion of data sets representingdifferent aspects of each category, and (c) to the extent possible, analysisof data quality; and (4) identification of two approaches for examiningscale-dependent relationships among stressors, covariates, and patterns ofspecies richness-scaling-up and regression-tree analyses.Based on this framework, we propose 10 data sets as a minimum data base forexamining the effects of stressors and covariates on species richness atlarge spatial scales. These data sets include land cover, roads, wetlands(numbers and loss), exotic species, livestock grazing, surface water pH,pesticide application, climate (and weather), topography, and streams.KEY WORDS: Anthropogenic impacts; Biodiversity; Environmental gradients;Geographic information systems; Hierarchy     

Denitrification Distributions in Four Valley and Ridge Riparian Ecosystems

/ Denitrification in riparian ecosystems can reduce the amount ofnitrogen transported from farm fields to streams. In this study, we examinedenitrification in four riparian ecosystems common to the Valley and Ridgephysiographic province in Pennsylvania, USA. The sites exhibit differentvegetation, are underlain by different rock types, and are downgradient offarm fields. Mean site denitrification rates ranging from 0.6 to 1.9 &mgr;gN/kg soil/day were measured using intact core incubation techniques. Thethree riparian sites covered with grass each exhibited greaterdenitrification rates than the wooded site. Denitrification rate wascorrelated with moisture content but not with nitrate-N or organic carboncontents. Denitrification rates were greatest near the soil surface and atpositions nearest the stream. Rates decreased uniformly with distance awayfrom the stream and also with depth in the soil for each site. While patternsof nitrate-N, moisture, and organic carbon content differ among the sites,their combined effects on denitrification support the observed, consistentdenitrification rate pattern.KEY WORDS: Denitrification; Riparian ecosystems     

NATURAL EROSION RATES AND THEIR PREDICTION IN THE IDAHO BATHOLITH1

ABSTRACT: Natural rates of surface erosion on forested granitic soils in central Idaho were measured in 40 m² bordered erosion plots over a period of four years. In addition, we measured a variety of site variables, soil properties, and summer rainstorm intensities in order to relate erosion rates to site attributes. Median winter erosion rates are approximately twice summer period rates, however mean summer rates are nearly twice winter rates because of infrequent high erosion caused by summer rainstorms. Regression equation models and regression tree models were constructed to explore relationships between erosion and factors that control erosion rates. Ground cover is the single factor that has the greatest influence on erosion rates during both summer and winter periods. Rainstorm intensity (erosivity index) strongly influences summer erosion rates, even on soils with high ground cover percentages. Few summer storms were of sufficient duration and intensity to cause rilling on the plots, and the data set was too small to elucidate differences in rill vs. interrill erosion. The regression tree models are relatively less biased than the regression equations developed, and explained 70 and 84 percent of the variability in summer and winter erosion rates, respectively.     

The influence of degree of substitution on blend miscibility and biodegradation of cellulose acetate blends

In this account, we report our findings on blends of cellulose acetate having a degree of substitution (DS) of 2.49 (CA2.5) with a cellulose acetate having a DS of 2.06 (CA2.0). This blend system was examined over the composition range of 0–100% CA2.0 employing both solvent casting of films (no plasticizer) and thermal processing (melt-compressed films and injection molding) using poly(ethylene glycol) as a common plasticizer. All thermally processed blends were optically clear and showed no loss in optical quality after storage for several months. Thermal analysis and measurement of physical properties indicate that blends in the middle composition range are partially miscible, while those at the ends of the composition range are miscible. We suggest that the miscibility of these cellulose acetate blends is influenced primarily by the monomer composition of the copolymers. Bench-scale simulated municipal composting confirmed the biodestructability of these blends and indicated that incorporation of a plasticizer accelerated the composting rates of the blends.In vitro aerobic biodegradation testing involving radiochemical labeling conclusively demonstrated that both the lower DS CA2.0 and the plasticizer significantly enhanced the biodegradation of the more highly substituted CA2.5.While this work was in progress, Robert Gardner was struck with cancer and died on June 6, 1995. This paper is dedicated to his memory and to his contributions as a friend and colleague.     

Thermal treatment and non-thermal technologies for remediation of manufactured gas plant sites

More than 1500 manufactured gas plant (MGP) sites exist throughout the U.S. Many are contaminated with coal tar from coal-fueled gas works which produced ‘town gas’ from the mid-1800s through the 1950s.^1,2 Virtually all old U.S. cities have such sites. Most are in downtown areas as they were installed for central distribution of manufactured gas. While a few sites are CERCLA/Superfund, most are not. However, the contaminants and methods used for remediation are similar to those used for Superfund clean-ups of coal tar contamination from wood-treating and coke oven facilities. Clean-up of sites is triggered by regulatory pressure, property transfers and re-development as well as releases to the environment — in particular, via groundwater migration. Due to utility de-regulation, site clean-ups may also be triggered by sale of a utility or of a specific utility site to other utilities. Utilities have used two approaches in dealing with their MGP sites. The first is ‘do nothing and hope for the best’. History suggests that, sooner or later, these sites become a bigger problem via a release, citizen lawsuit or regulatory/public service commission intervention. The second, far better approach is to define the problem now and make plans for waste treatment or immobilization. This paper describes recent experience with a high capacity/low cost thermal desorption process for this waste and reviews non-thermal technology, such as bio-treatment, capping, recycling, and dig and haul. Cost data is provided for all technologies, and a case study for thermal treatment is also presented.     

Evaluation of the california environmental quality act

The California Environmental Quality Act (CEQA) has evolved from a mini-NEPA, first enacted in 1970, into a procedural act that affects the approval process of all large developments in California. In 1990, California local governments produced over 1600 environmental impact reports and 30,000 initial studies under CEQA. Because of its widespread use, CEQA has periodically drawn the attention of the state legislature, most recently in 1993, when over 60 CEQA reform bills were introduced. This paper describes the CEQA process and evaluates its success at meeting its explicit and implicit goals. The research includes a statewide survey of CEQA practice, sent to the planning departments of all 513 local governments in California in 1991. Survey respondents agreed that CEQA helps in evaluating environmental impacts, reducing impacts, informing the public, and coordinating public agency review. It is effective in reducing the environmental impacts of individual projects, but is not as effective in improving environmental quality on an areawide scale. This research concludes that CEQA has led to positive outcomes and is not as deeply flawed as many of its critics claim. Still, CEQA as currently designed may not be the optimal vehicle for ensuring environmental quality.