Solvent tolerant marine bacterium Bacillus aquimaris secreting organic solvent stable alkaline cellulase

The organic solvent tolerant bacteria with their physiological abilities to decontaminate the organic pollutants have potentials to secrete extracellular enzymes of commercial importance. Of the 19 marine bacterial isolates examined for their solvent tolerance at 10 vol.% concentration, one had the significant tolerance and showed a relative growth yield of 86% for acetone, 71% for methanol, 52% for benzene, 35% for heptane, 24% for toluene and 19% for ethylacetate. The phylogenetic analysis of this strain using 16S rDNA sequence revealed 99% homology with Bacillus aquimaris. The cellulase enzyme secreted by this strain under normal conditions showed an optimum activity at pH 11 and 45 °C. The enzyme did show functional stability even at higher pH (12) and temperature (75 °C) with residual activity of 85% and 95% respectively. The enzyme activity in the presence of different additives were in the following order: Co⁺² > Fe⁺² > NaOCl₂ > CuSO₄ > KCl > NaCl. The enzyme stability in the presence of solvents at 20 vol.% concentration was highest in benzene with 122% followed by methanol (85%), acetone (75%), toluene (73%) and heptane (42%). The pre-incubation of enzyme in ionic liquids such as 1-ethyl-3-methylimidazolium methanesulfonate and 1-ethyl-3-methylimidazolium bromide increased its activity to 150% and 155% respectively. The change in fatty acid profile with different solvents further elucidated the physiological adaptations of the strain to tolerate such extreme conditions.     

Effect of linear alkyl benzene sulphonate on erythrocyte sedimentation rate of teleost fish,Heteropneustes fossilis

ESR increased at all concentrations and exposures to LAS. However, increases were more pronounced at LC50 for 24 h and minimum at the end of 96 h.     

Mustard plant ash: a source of micronutrient and an adsorbent for removal of 2,4-dichlorophenoxyacetic acid

The work highlights the utilization of an agricultural waste mustard plant ash (MPA) as a soil additive and an adsorbent. MPA was characterized by X-ray fluorescence (XRF), energy-dispersive X-ray spectroscopy (EDX), proximate analysis, CHNS analysis, Brunauer–Emmett–Teller (BET) surface area analysis, zeta potential measurements, Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). XRF analysis confirmed the presence of CaO (31.35 %), K₂O (18.55 %), and P₂O₅ (6.99 %), all of which act as micronutrients to plants. EDX also confirms high amount of elemental O, Ca, K, and P. The adsorptive ability of MPA was investigated using a commonly used herbicide, 2,4-dichlorophenoxyacetic acid (2,4-D), as a representative chemical. Batch adsorption experiments were conducted to study the effect of different operational parameters such as adsorbent dose, initial 2,4-D concentration, contact time, and temperature on the adsorption process. Data from experiments were fitted to various kinetic and isothermal models. The pseudo-second-order kinetic model was found to show the best fit (R ²?>?0.99), with the highest k ₂ value of the order 10⁵. Based on the study results, dosage of MPA/hectare for different crops has been recommended for effective removal of 2,4-D. To our knowledge, this is the first study in which MPA has been characterized in detail and investigated for dual applications (as an adsorbent and as a soil additive).     

Emissions of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (PCBs) to air from waste incinerators and high thermal processes in India

This study investigated dioxins and dioxin-like polychlorinated biphenyls in gasses emitted from waste incinerators and thermal processes in central and western parts of India. The concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/DFs) ranged from 0.0070 to 26.8140 ng toxicity equivalent (TEQ)/Nm³, and those of dioxin-like polychlorinated biphenyls (PCBs) ranged from 0.0001?×?10^?1 to 0.0295 ng TEQ/Nm³. The characteristics of mean PCDD/F I-TEQ concentration and congener profiles were studied over all the samples of air. In particular, a pattern consisting of a low proportion of dioxin-like PCBs and high proportion of PCDDs/DFs was common for all the samples from incinerators and high-temperature processes.     

Urban environment alter the timing of progression of testicular recrudescence in tree sparrow (Passer montanus)

Environmental Science and Pollution Research - Urbanization is a rapidly growing phenomenon that affects wildlife. Laboratory studies show the effects of night light on the physiology of the...     

Characterization and valorization of biomass ashes

In India, farming is the primary source of income for many families. Following each harvest, a huge amount of biomass is generated. These are generally discarded as “agrowaste,” but recent reports have indicated several beneficial uses for these biomasses and their ashes. However, before the utilization of biomass ashes (BMAs), their chemical and physical properties need to be investigated (characterized) so as to utilize their potential benefit to the fullest. In this paper, eight different biomass ashes (soybean plant ash, mustard plant ash, maize ash, groundnut plant ash, cotton plant ash, wheat plant ash, pigeon peas ash, and groundnut shell ash) were characterized, and their chemical properties are discussed. Surface chemical composition analysis, proximate analysis, and ultimate analysis were performed on all BMA samples, and properties such as porosity, particle density, bulk density, point of zero charge, BET surface area, water-absorption capacity, and bulk parameters such as surface pH and surface charges were determined. BMAs were characterized by SEM and FTIR. The surface areas of biomass ashes vary from 1.9 to 46 m²/g, and point of zero charge for all BMAs exceed 9.8, which confirmed the alkaline nature of these samples. Based on the chemical composition, BMAs are categorized into four types (S, C, K, and CK), and their utilization is proposed based on the type. BMAs find applications in agriculture and construction industries; glass, rubber, and zeolite manufacturing; and in adsorption (as a source of silica/zeolites). The paper also discusses the research challenges and opportunities in utilization of BMAs.     

Monitoring of pesticide residues in market basket samples of vegetable from Lucknow City, India: QuEChERS method

The study was conducted on 20 vegetables including leafy, root, modified stem, and fruity vegetables like bitter gourd, jack fruit, french-bean, onion, colocassia, pointed gourd, capsicum, spinach, potato, fenugreek seeds, carrot, radish, cucumber, beetroot, brinjal, cauliflower, cabbage, tomato, okra, and bottle gourd. Forty-eight pesticides including 13 organochlorines (OCs), 17 organophosphates (OPs), 10 synthetic pyrethriods (SPs), and eight herbicides (H) pesticides were analyzed. A total number of 60 samples, each in triplicates, were analyzed using Quick, Easy, Cheap, Effective, Rugged, and Safe method. The quantification was done by GC-ECD/NPD. The recovery varies from 70.22% to 96.32% with relative standard deviation (RSD) of 15%. However the limit of detection ranged from 0.001?C0.009 mg kg^???1 for OCs, SPs, OPs, and H, respectively. Twenty-three pesticides were detected from total 48 analyzed pesticides in the samples with the range of 0.005?C12.35 mg kg^???1. The detected pesticides were: ??-HCH, Dicofol, ??-Endosulfan, Fenpropathrin, Permethrin-II, ??-cyfluthrin-II, Fenvalerate-I, Dichlorvos, Dimethoate, Diazinon, Malathion, Chlorofenvinfos, Anilophos, and Dimethachlor. In some vegetables like radish, cucumber, cauliflower, cabbage, and okra, the detected pesticides (??-HCH, Permethrin-II, Dichlorvos, and Chlorofenvinfos) were above maximum residues limit (MRL) (PFA 1954). However, in other vegetables the level of pesticide residues was either below detection limit or MRL.     

Devicyprin induced gonadal impairment in a freshwater food fish, Channa punctatus (Bloch)

Synthetic pyrethroids are the recent major class of broad spectrum, photostable, organic insecticides used in agricultural, domestic and veterinary applications and now account for more than 30% of global insecticide use. Cypermethrin is metabolized and eliminated significantly more slowly by fish than by mammals or birds, which may explain this compound's high toxicity in fish compared to other organisms. The present communication deals with histoanatomical alterations in the gonads of a local fresh water food fish, Channa punctatus exposed to 0.033 ppm (96 hr LC50 X 1/10) concentration of a synthetic pyrethroid, devicyprin (cypermethrin 25%) in aquatic medium of aged tap water for 15, 30 and 45 days respectively. In testis, exposure dependent histological damage has been observed in terms of vacuolization, condensation of spermatogonic cells, distortion of tubular epithelium, shrinkage of interstitial cells and general inflammatory responses. Longest exposure of 45 days has resulted in peculiar starry-sky appearance of the testicular tissue. Gross histo-anatomy of ovarian tissue reveals epithelial lesions, inflammatory responses, stromal hemorrhage, increased interstitium and shrinkage of yolk vesicles towards periphery These findings are quite suggestive of reproductive impairments leading to delayed gonadal maturity and adversely affecting processes of sperm production and ovulation and thus, the fish production.     

Impact of copper on haematological profile of freshwater fish, Channa punctatus

The present study was to evaluate heavy metal toxicity stress symptoms in fish blood during long-term exposure of sublethal concentration of copper sulphate (CuSO4). The effects of copper on various heamatological parameters were evaluated exposing Indian fresh water fish, Channa punctatus to a sub-lethal concentration of copper sulphate (0.36 mg l(-1)) for different periods. Exposure of fish to copper showed a significant decrease in the haemoglobin (Hb) content from 10.73 to 6.60%, red blood cells (RBC) from 2.86 to 1.84 x 10(6)/mm3 and packed cell volume (PCV) from 31.00 to 23.33% at the end of 45th day as compared to control. Whereas the white blood cells (WBC) increased from 60.00 to 92.48 x10(3)/mm3, clotting time (CT) from 27.66 to 43.00 second, erythrocyte sedimentation rate from 5.0 to 13.66 mm/hr and mean corpuscular volume from 108.11 to 126.85 cmu, significantly, with increase in exposure periods. Although mean corpuscular haemoglobin concentration (MCHC) and mean corpuscular haemoglobin (MCH) values showed significant increase during 15 and 30 days exposures, both the values were found significantly increased at the end of the experimental period. The differential leucocytes count (DLC) showed a significant increase in the populations of lymphocytes and eosinophils, whereas neutrophils, monocytes and basophiles were found decreased after exposure to copper.