Pyrolysis technologies for municipal solid waste: A review

Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO₂ and NH₃, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.     

Volcano-related materials in concretes: a comprehensive review

Massive volcano-related materials (VRMs) erupted from volcanoes bring the impacts to natural environment and humanity health worldwide, which include generally volcanic ash (VA), volcanic pumice (VP), volcanic tuff (VT), etc. Considering the pozzolanic activities and mechanical characters of these materials, civil engineers propose to use them in low carbon/cement and environment-friendly concrete industries as supplementary cementitious materials (SCMs) or artificial/natural aggregates. The utilization of VRMs in concretes has attracted increasing and pressing attentions from research community. Through a literature review, this paper presents comprehensively the properties of VRMs and VRM concretes (VRMCs), including the physical and chemical properties of raw VRMs and VRMCs, and the fresh, microstructural and mechanical properties of VRMCs. Besides, considering environmental impacts and the development of long-term properties, the durability and stability properties of VRMCs also are summarized in this paper. The former focuses on the resistance properties of VRMCs when subjected to aggressive environmental impacts such as chloride, sulfate, seawater, and freezing–thawing. The latter mainly includes the fatigue, creep, heat-insulating, and expansion properties of VRMCs. This study will be helpful to promote the sustainability in concrete industries, protect natural environment, and reduce the impacts of volcano disaster. Based on this review, some main conclusions are discussed and important recommendations regarding future research on the application of VRMs in concrete industries are provided.     

Effects of Natural and Artificial Weathering on the Physical Properties of Recycled Poly(ethylene terephthalate)

In accelerated weathering tests, specimens are exposed to higher radiation intensity, temperature and humidity than is likely under natural weathering in order to achieve rapid degradation of the polymer in a convenient short time. In the current work, a correlation between the two environments is attempted so that a prediction of lifetimes in the natural environment can be achieved. During aging, surface flaws are created due to the chain scission process. This is initiated by the absorption of ultra-violet light and directly affects visual appearance and impact strength. After natural weathering, the material shows only plastic deformation in an impact test. However, after artificial weathering to 5000 h of UV exposure, there is a decrease of 85% in impact strength. Colour change occurs at a high rate in the early stages of UV exposure. Beyond 2000 h of exposure, the colour change approaches a steady state and a correlation between the changes under natural and artificial weathering becomes apparent for a potential prediction of lifetimes. From the analysis including the specular component (SCI), taking surface roughening into account, 1 year under natural weathering was found to be equivalent to 25 days under accelerated weathering.     

Effects of law enforcement and community outreach on mammal diversity in a biodiversity hotspot

Management activities such as law enforcement and community outreach are thought to affect conservation outcomes in protected areas, but their importance relative to intrinsic environmental characteristics of the parks and extrinsic human pressures surrounding the parks have not been explored. Furthermore, it is not clear which is more related to conservation outcomes—the management itself or local people's perceptions of the management. We measured objective (reports by park staff) and subjective (reports by local people) levels of community outreach and law enforcement based on responses to 374 questionnaires. We estimated mammal abundance and diversity of 6 protected areas based on data from 115 camera traps in Xishuangbanna, southwest China, a biodiversity hotspot with high hunting and land-conversion pressures. We then examined correlations among them and found that local people's perception of law enforcement was positively related to the local abundance of 2 large, hunted species, wild boar (Sus scrofa) (β = 15.22) and muntjac (Muntiacus vaginalis) (β = 14.82), but not related to the abundance of smaller mammals or to objective levels of enforcement. The subjective frequency of outreach by park staff to local communities (β = 3.42) and park size (β = 3.28) were significantly and positively related to mammal species richness, whereas elevation, human population density, and subjective frequency of law enforcement were not. We could not conclude that community outreach and law enforcement were directly causing increased mammal abundance and diversity. Nevertheless, the patterns we detected are some of the first empirical evidence consistent with the idea that biodiversity in protected areas may be more positively and strongly related to local perceptions of the intensity of park management than to either intrinsic (e.g., elevation, park size) or extrinsic (e.g., human population density) environmental factors.     

Delineation of potential ground water-bearing zones in the Barind tract of West Bengal,India

The Barind tract of West Bengal is an area of tropical sub-humid region composed of old alluvial soil. The area has high water demand due to growing population pressure and intensification in agricultural activity. These create huge stress on surface and ground water availability. Continuous withdrawal of ground water has become an alternative source of irrigation water which has also again made the condition critical. Ground water level has been lowered down drastically in many parts in this region. Under this circumstance, it is necessary to delineate potential ground water-bearing layers. Therefore, the present study attempts to identify potential ground water-bearing zones to manage ground water effectively. Instead of usually used parameters for ground water potentiality delineation here only some particular litholog parameters like breadth of water-bearing layer, depth of water-bearing layer, presence of clay layer above or below major water-bearing layer have been considered for delimiting the same. The result shows that out of total area, 60% area (405,382.2 ha) falls under very low to low potential ground water-bearing zone and only 8.19% area (55,634.97 ha) is potential. Considering this spatial pattern of ground water availability, harvesting structure and magnitude of water withdrawing should be designed.     

Developing biodiversity indicators on a stakeholders’ opinions basis: the gypsum industry Key Performance Indicators framework

This study aims to establish a common Key Performance Indicators (KPIs) framework for reporting about the gypsum industry biodiversity at the European level. In order to integrate different opinions and to reach a consensus framework, an original participatory process approach has been developed among different stakeholder groups: Eurogypsum, European and regional authorities, university scientists, consulting offices, European and regional associations for the conservation of nature, and the extractive industry. The strategy is developed around four main steps: (1) building of a maximum set of indicators to be submitted to stakeholders based on the literature (Focus Group method); (2) evaluating the consensus about indicators through a policy Delphi survey aiming at the prioritization of indicator classes using the Analytic Hierarchy Process method (AHP) and of individual indicators; (3) testing acceptability and feasibility through analysis of Environmental Impact Assessments (EIAs) and visits to three European quarries; (4) Eurogypsum final decision and communication. The resulting framework contains a set of 11 indicators considered the most suitable for all the stakeholders. Our KPIs respond to European legislation and strategies for biodiversity. The framework aims at improving sustainability in quarries and at helping to manage biodiversity as well as to allow the creation of coherent reporting systems. The final goal is to allow for the definition of the actual biodiversity status of gypsum quarries and allow for enhancing it. The framework is adaptable to the local context of each gypsum quarry.     

Biodegradation characteristics of organic matters in swine carcasses under different initial operating conditions of simulated anaerobic lysimeter

This study was aimed to investigate the biodegradation characteristics of organic matters in swine carcasses. The lysimeters were simulated with different initial operating conditions: 30 % volumetric moisture content and no sludge addition for lysimeter A (control), 30 % volumetric moisture content and anaerobic sludge addition for lysimeter B, and 40 % volumetric moisture content and anaerobic sludge addition for lysimeter C. The degradation efficiency (18.4 %) of lysimeter B was higher than that (15.2 %) of lysimeter A due to anaerobic sludge addition. Lysimeter B showed higher CH₄ yield (15.6 L/kg VS) and CH₄ production rate (0.41 L/kg VS days) compared to lysimeter A by 31 % and 14 %, respectively. In addition, the degradation efficiency improved from 18.4 % (lysimeter B) to 26.3 % (lysimeter C) by increasing volumetric moisture content. The CH₄ yield (22.9 L/kg VS) and CH₄ production rate (0.68 L/kg VS days) of lysimeter C were higher than those of lysimeter B, respectively. Total organic carbon (TOC) removed in lysimeter C was converted to leachate (20.3 %) and gas (6.0 %), whose values were higher than those of lysimeter A and B. These results demonstrated that the proper control of initial operating conditions could accelerate the anaerobic degradation of organic matters in swine carcasses.