Estimating the contribution of industrial facilities to annual PM10 concentrations at industrially influenced sites

If measures to reduce the industrial discharge of PM10 shall be planned with high accuracy, a first step must be to estimate the contribution of single industrial facilities to the overall PM10 burden as accurately as possible. In northern Duisburg as an example, an area where iron and steel producing industry is concentrated, PM10 was measured at 4 sampling sites very close to an industrial complex of blast furnaces, a sinter plant, oxygen steel works and a coke oven plant for 9 months in 2006. At two sites metals in PM10 were determined. The results, together with analytical data of urban background sites in the region and data of wind direction and wind speed were used for an estimation of the contribution of single plants to the PM10 burden. A careful analysis of the data showed, that the data of PM10, calcium, iron and zinc measured at two sites close to the industrial area and information about the urban background aerosol were sufficient to calculate the PM10 contribution of the main single plants. The data could be compared with those of modelling.     

Multivariate Patterns of Antioxidative and Photoprotective Defence Compounds in Spruce Needles at Two Central European Forest Sites of Different Elevation

In this work we measured a set of antioxidative and photoprotective compounds (chlorophylls, carotenoids, tocopherol, ascorbate and glutathione), which were suggested previously as stress markers in conifer needles, at two spruce forest sites at different elevation in Saxony, Germany. Most variables differed significantly between current and 1-year-old needles, but only the content of the xanthophyll cycle per mg total chlorophyll and the oxidation state of glutathione were significantly different between the sites. We applied principal component analysis (PCA) to address the question if underlying accumulated variables are similar to the ones found in spruce needles across Alpine elevation profiles and/or for pines in Mediterranean ecosystems. Four principal components (accumulated variables, PC) representing 68% of the total variance of the dataset were extracted. PC 1 encompassed total chlorophyll, lutein, and β-carotene contents, PC 2 combined the epoxidation state of xanthophylls, ascorbate content and redox state, and glutathione content, PC 3 represented the content of xanthophylls and the redox state of glutathione, and PC 4 encompassed the content of α-carotene and the epoxidation state of xanthophylls. Only PC 3 was significantly different between sites. The PCA structure shows many similarities to corresponding findings in studies on spruce in mountain forests in the Alps and pines in Mediterranean systems. This corroborates the interpretation of PCs as indicative for underlying physiological processes. However, separation of the two investigated sites by PCs was in the present case study not superior to the separation by single input variables.     

Predictions for isomer distributions of toxic dioxins and furans in selected industrial combustion processes

Three thermodynamic databases of polychlorinated dibenzo-p-dioxins and dibenzo-furans (PCDD/Fs) have been used to simulate the PCDD/F isomer distribution in industrial combustion processes. The three databases had been derived using the Group Additivity approach and two computational molecular modelling methods, Modified Neglect of Diatomic Overlap (MNDO) and Parametrized Model 3 (PM3), respectively. The predictions of the toxic PCDD/F isomer distributions using the three different databases have been compared with measured values from industrial processes. An excellent agreement between the predictions using the MNDO method and the measured data has been obtained. It is concluded that the PCDD/F isomer distributions within each group observed in these combustion processes may be thermodynamically controlled.     

Bewertung von Monitoringdaten der Umweltprobenbank des Bundes mit der Hasse-Diagramm-Technik

On behalf of the Federal Environment Ministry the Federal Environmental Agency operates the German Environmental Specimen Bank (ESB), which targets are to record and evaluate pollution data of selected ecological systems. Scope of the present study is to check the possibilities of the Hasse diagram technique (HDT) for the assessment of ESB data, mainly with regard to evaluations and conclusions. Xenobiotic body burden in Bream musculature (Abramis brama), measured in 1997, was exemplary used to answer these questions. Focus was put on ecosystemic assessment. The results clearly show that HDT is a valuable method for the graphical display, interpretation and comparative evaluation of pollution data. HDT visualises data qualitatively and in summary. Additionally, differences between pollution patterns are revealed, which suggest different contamination processes and entries. An ecosystemic approach of assessment is achieved by simultaneous consideration of different xenobiotics.     

Prenatal diagnosis of a de novo supernumerary marker derived from chromosome 16

Marker chromosomes are supernumerary chromosomes of unknown origin and are seldom found in prenatal diagnosis. Application of fluorescent in situ hybridization (FISH) allows the identification of the chromosomal origin of markers. Estimation of the risk of an abnormal phenotype outcome can be enabled by collecting data on phenotypes associated with markers of the same chromosomal origin. So far only very few cases of prenatal diagnosis of de novo supernumerary markers derived from chromosome 16 have been reported. Here the prenatal diagnosis of a de novo supernumerary marker chromosome 16 is described and the relevant literature discussed. Copyright © 2001 John Wiley & Sons, Ltd.     

DEHP (Di(2-ethylhexyl)phthalat)

Background, Goal and Scope

The plasticiser DEHP is suspected to affect the human reproductive system as an endocrine disruptor (Latini et al. 2004). A meta-analysis was performed to compare annual production amounts and daily uptake of DEHP.

Methods

For this purpose, production data were used from annual publications of the Federal Statistical German Agency (Statistiches Bundesamt) and daily uptake values on the basis of urinary secretion of DEHP metabolites from Wittassek et al. (2007a).

Results

It is shown that the daily uptake of DEHP by German university students is strictly and almost perfectly correlated with the industrial production of DEHP in Germany (correlation coefficient >0.9).

Discussion

The annual production amounts are reflected by the daily uptake values. When the production amount is high, the uptake increases; when the production amount is low, the uptake decreases.

Conclusions

This strict correlation allows the extrapolation of daily DEHP uptake for the 1970s years. On this basis it can be assumed that, at least for a part of the German population, the TDI of 50 μg/kg BW/day was exceeded. Because of their higher susceptibility and, therefore, higher uptake rate (Becker et al. 2004), a considerable exposure for infants might have occurred in these years.     

Separation of chlorinated hydrocarbons and organophosphorus, pyrethroid pesticides by silicagel fractionation chromatography and their simultaneous determination by GC-MS

A silicagel fractionation procedure for environmental sample extracts, which separates chlorinated hydrocarbons(CHCs) and organophosphorus, pyrethroid pesticides into two groups for subsequent instrumental analysis, was developed in this study. This method was achieved by optimizing the fraction cut-off volume of elution and different solvents. Using fully activated silica gel and cut-off CHCs collection after 10ml 10% dichloromethane (DCM) in n-hexane passing through the column resulted in satisfactory separation of CHCs and organophosphorus, pyrethroid pesticides. This procedure had a higher reliability for CHCs than for organophosphorus, pyrethroid pesticides, because there is a relatively reliable recovery for CHCs. This approach is less expensive due to reducing sample pre-treatment time and solvent consumption.     

Finger and hand protection on circular table and panel saws

Several hundred accidents involving the use of circular saws and resulting in injury, to hands or fingers occur each year in Germany.In the presented project, new approaches for the prevention of hand injuries and for the contactless detection of fingers are being investigated for comprehensive protection on circular saws. The basic principles can be applied to other machines with manual loading and/or unloading. This paper describes several principles to distinct human skin and wood and a safety guard that prevents touching the rotating blade. In a first approach a reliable protective device with functional diversity has been developed using a passive infrared sensor in combination with a capacitive field sensor. Second the distinction between skin and wood or other material is done by dedicated kind of spectral analysis in the near infrared region. With a kind of light curtain the intrusion into the dangerous zone near the blade can be prevented.The safety guard protects the operator’s hand within 50 ms. The forces of the protective system peak at no more than 120 N. We are presenting a complete strategy for such different tasks as cutting wedges, stopped cutting and hidden cutting, which have a very high odds ratio.     

Responses of a bacterial pathogen to phosphorus limitation of its aquatic invertebrate host

Host nutrition is thought to affect the establishment, persistence, and severity of pathogenic infections. Nutrient-deficient foods possibly benefit pathogens by constraining host immune function or benefit hosts by limiting parasite growth and reproduction. However, the effects of poor elemental food quality on a host's susceptibility to infection and disease have received little study. Here we show that the bacterial microparasite Pasteuria ramosa is affected by the elemental nutrition of its aquatic invertebrate host, Daphnia magna. We found that high food carbon:phosphorus (C:P) ratios significantly reduced infection rates of Pasteuria in Daphnia and led to lower within-host pathogen multiplication. In addition, greater virulent effects of bacterial infection on host reproduction were found in Daphnia-consuming P-deficient food. Poor Daphnia elemental nutrition thus reduced the growth and reproduction of its bacterial parasite, Pasteuria. The effects of poor host nutrition on the pathogen were further evidenced by Pasteuria's greater inhibition of reproduction in P-limited Daphnia. Our results provide strong evidence that elemental food quality can significantly influence the incidence and intensity of infectious disease in invertebrate hosts.